User Manual

Tools
107
Glossary: Roaming
agreement - An
agreement between two
or more network service
providers to enable the
users of one service
provider to use the
services of other service
providers.
Operator selection - Select Automatic to set the phone to search for and select one of
the available networks, or Manual to manually select the network from a list of networks.
If the connection to the manually selected network is lost, the phone will sound an error
tone and ask you to reselect a network. The selected network must have a roaming
agreement with your home network, that is, the operator whose SIM card is in your phone.
Cell info display - Select On to set the phone to indicate when it is used in a cellular
network based on microcellular network (MCN) technology and to activate cell info
reception.
Enhancement settings
Indicators shown in the
standby mode:
- a headset is
connected.
- a loopset is
connected.
- headset unavailable,
connection to a Bluetooth
headset has been lost.
Select the enhancement: Headset, Loopset, Text phone (a TTY device), or Handsfree (a
Bluetooth handsfree device).
• Select Default profile to set the profile that you want activated each time you connect
a certain enhancement to your phone. See ‘Profiles - setting tones’, p. 12.
• Select Automatic answer to set the phone to answer an incoming call automatically
after five seconds. If the Ringing type is set to Beep once or Silent, automatic answer
is disabled.
Voice commands
Press and select Tools→ Voice com.. Voice commands allows you to add, delete, and
control voice commands in your phone. Voice commands are recorded the same way as
voice tags. See ‘Adding a voice tag to a phone number’, p. 30.
Adding a voice command to an application
You can have only one voice command per application.
1 Select the application to which you want to add a voice command.
To add a new application to the list, select Options→ New application.
R0915_en.book Page 107 Wednesday, September 15, 2004 12:14 PM