User Manual

Tools
100
- UMTS network, packet data connection is active, data is being transferred.
- UMTS network, multiple packet data connections are active.
Receiving access point settings
You may receive access point settings in a text message from a service provider, or you may
have preset access point settings in your phone. See ‘Receiving logos, tones, business cards,
calendar entries, and settings’, p. 54.
• To create a new access point, select Tools→ Settings→ Connection→ Access points.
An access point may be set to be protected ( ) by your network operator or service
provider. Protected access points cannot be edited or deleted.
Access points
Options in the
Access points list: Edit,
New access point,
Delete, Help, and Exit.
Follow the instructions given to you by your service provider.
Connection name - Give a descriptive name for the connection.
Data bearer - Depending on what data connection you select, only certain setting fields
are available. Fill in all fields marked with Must be defined or with a red asterisk. Other
fields can be left empty, unless you have been instructed otherwise by your service
provider.
Options when
editing access point
settings: Change,
Advanced settings, Help,
and Exit.
To be able to use a data connection, the network service provider must support this feature,
and if necessary, activate it for your SIM card.
Access point name (for packet data only) - The access point name is needed to establish
a connection to the packet data and UMTS networks. You obtain the access point name
from your network operator or service provider.
R0915_en.book Page 100 Wednesday, September 15, 2004 12:14 PM