Nokia 2125i User Guide Issue 1 931169X26 LEGAL INFORMATION 1
Part No. 9240273, Issue No. 1 Copyright ©2005 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia 2125i, Xpress-on, Pop-Port, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. Printed in Canada 2005 US Patent No. 5818437 and other pending patents. T9 text input software Copyright ©1999-2005. Tegic Communications, Inc.
Table of Contents Table of Contents For your safety 41.Phone at a glance 92.Set up your phone 133.Text entry 214. Contacts list 245.Messages 316.Call log 427.Profiles 468.Settings 479.Gallery 6510.Games 6611.Voice 6712.Minibrowser 7013.Organizer 7314.Applications 8115.PC Connectivity 8216.Enhancements 8417.
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACKUP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety changes in menu names, menu order and icons. Contact Virgin Mobile for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as the Minibrowser, require network support for these technologies. ■ Shared memory The following features in this device may share memory: contacts, text messages, images, and tones in Gallery, calendar notes, games, and applications.
Welcome Welcome Congratulations on your purchase of the Nokia 2125i mobile phone. Your phone provides many functions that are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar. Your phone can also connect to a PC, laptop, or other device using a data cable. To personalize your phone, you can set your favorite ring tones or select an Xpress-onTM color cover. ■ Get help Find your phone label If you need help, Nokia Customer Care is available for assistance.
Welcome Ajax, Ontario L1S 4N7 Tel: 1-888-22-NOKIA (1-888-226-6542) Fax: 1-905-427-1070 Updates From time to time, Nokia updates this guide to reflect changes. The latest version and an interactive tutorial for this product may be available at the web site www.nokiausa.com. Accessibility solutions Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the web site at www.nokiaaccessibility.com.
Phone at a glance 1. Phone at a glance •Power key and flashlight (1) •Earpiece (2) •Right selection key (3) •End key (4) •Keypad (5) •Connection port (6) •Microphone (7) •Charger port (8) •Scroll up and down key (9) •Call key (10) •Left selection key (11) •Display screen (12) ■ The start screen Depending on your wireless service provider and the model number of your device, some or all of the following selection keys may appear on the start screen.
Phone at a glance The start screen is home base and indicates that your phone is in the standby mode. Signal strength (1)—A higher bar indicates a stronger network signal. Battery level (2)—A higher bar indicates more charge in the battery. Menu (3)—Press the left selection key to select this option. Contacts (4)—Press the right selection key to select this option.
Phone at a glance or Location info sharing is set to Emergency or On. See "Location information sharing," p. 46. Vibrating alert is active. See "Profiles," p. 45. You are roaming outside your home network. See "Roaming options," p. 60. You are in a 1XRTT network. See "Network services," p. 5. You are in a digital network. See "Network services," p. 5. You are in an analog network. See "Network services," p. 5. or Off hook, call or data call in progress.
Phone at a glance Shortcuts To go directly to almost any menu or submenu, as well as activate most features use a shortcut. In the standby mode, select Menu; then within 3 seconds, press the key or keys associated with the menu function you would like to view or activate. For example, to select the meeting profile, select Menu 6-1-3-1 from standby mode (Menu > 6 Settings > 1 Profiles > 3 Meeting > 1 Activate). After a brief pause, the Meeting profile is activated. (in spec, Profiles is {qtn.sett.profiles.
Set up your phone 2. Set up your phone ■ Antenna Your phone has an internal antenna that is located toward the top of the phone. In the Nokia 2125i phone, the GPS antenna is internal and is activated when you place emergency calls or when Location on is selected from the Location info sharing menu. See "Location information sharing," p. 46. Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder.
Set up your phone Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the ACP-7 and ACP-12 chargers. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Note: Always switch off the power and disconnect the charger and any other device before removing the cover .
Set up your phone Replace the battery 1. Position the battery so the positive and negative indicators on the battery match up with the positive and negative indicators on the phone. The battery label should face away from the phone. 2. Insert the battery, gold-colored contact end first, into the battery slot. 3. Push down on the other end of the battery to snap it into place. Replace the back cover Slide the back cover toward the top of the phone until the back cover is securely in place.
Set up your phone ■ Turn your phone on or off 1. To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds. 2. Enter the lock code. if necessary, and select OK. See "Security settings," p. 56. ■ Connect the headset A compatible headset, such as HS-5, may be purchased with your phone or separately as an enhancement. See "Enhancements," p. 73. Warning: When using the headset, your ability to hear outside sounds may be affected.
Set up your phone To change the Xpress-on covers, first remove the back cover and battery. Remove the front cover Gently pull the bottom of the front cover away from the rest of the phone. Install the keymat and front cover 1. Remove the keymat from the old front cover. 2. Place the keymat into the new front cover.
Set up your phone 3. Press the front cover and keymat against the phone, and snap the front cover into place. 4. Replace the battery and back cover. ■ Make a call Use the keypad 1. Enter the phone number (including the area code), and press the call key. To delete a character to the left of the cursor, select Clear. 2. Press the end key to end the call, or select End call to cancel the call attempt. Use the contacts list 1. In the standby mode, scroll down to the entry you wish to view. 2.
Set up your phone 5. When the second participant answers, press the call key to connect the calls. 6. To end the conference call, press the end key. ■ Answer calls Answer, silence, or decline an incoming call Silence and Decline are carrier dependent features. 1. Press the call or Answer key to answer the call. 2. To mute the ringing tone, select Silence. If you do not answer the call, the call is forwarded to voicemail. 3.
Set up your phone Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Options during a call Many of the options that used during a call are network services. Check with your wireless service provider for more information. 1. Select Options to display the following: Mute or Unmute—Silence your end of the call. Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call. New call—Initiate a conference call.
Set up your phone Unlock the keypad Select Unlock; then press * within 2 seconds.
Text entry 3. Text entry You can use two methods for entering text and numbers: standard mode and predictive text mode. • Select Clear to backspace the cursor and delete a character. • Select and hold Clear to backspace continuously and delete characters. ■ Standard mode Standard mode is the only way to enter text into the contacts list and to rename caller groups. Text (Abc) Press a key once to insert the first letter on the key and twice for the second letter, etc.
Text entry ■ Predictive text mode To write messages quickly, use predictive text mode with your keypad and the built-in dictionary. Predictive text mode is much faster than the standard mode method because you do not need to scroll through the letters on each key to spell a word. The dictionary determines which word to enter based on the keys selected.
Text entry Sentence case text: standard mode is on. This option is available only at the beginning of a sentence. Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available only at the beginning of a sentence.
My Account 4. My Account You can access your Virgin Mobile account to check or increase your balance. ■ Access My Account To access your account, select Menu > My Account. This connects to the Virgin Mobile website.
Call history 5. Call history Call log stores information about the last 20 missed, 20 received, and 20 dialed calls. It also stores the duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest.
Call history Call times To view up to five calls with the time each call occurred, your phone clock must be set. 1. Select Options > Call time. 2. Scroll through the calls listed to view the most recent call times made from this number. 3. Select Back to return to the options list.
Messages 6. Messages If you have subscribed to a messaging service through your wireless provider, you can send and receive text messages to compatible phones that also subscribe to a compatible message service. You may also be able to send and receive picture messages and e-mail messages. Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.
Messages 5. Compose a message using the keypad, and select Options > Send. Messaging options When you create or reply to a text message, depending on the mode of text input you use and the features supported by your wireless service provider, some or all of the following options are available: Send—Send the message to recipient. List recipients—Send the message to more than one recipient; or delete or edit the recipient list.
Messages Read messages Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. When you receive a text message, a notification message and are displayed in the upper left corner in the standby mode. When you have unopened messages in your Inbox, is displayed. 1. Select Show to read the message or Exit to remove the notification icon. Scroll to view the whole message, if necessary. 2. Select Options > Reply. 3.
Messages View saved messages 1. In the standby mode, select Menu > Messages > Text messages. 2. Select the folder containing the message you wish to view: Inbox—Stores read and unread messages. Sent items—Stores messages send from your phone automatically. Archive—Stores messages you have saved. Templates—Stores pictures and prewritten templates. My folders—Provides a place to organize your messages in custom folders.
Messages Sent items—Deletes all messages from the Sent items folder Archive—Deletes all messages from the Archive folder User defined folders—Displays all user defined folders that the user has added under My folders after the predefined folders. Only folders created in My folders can be deleted. The Inbox, Sent items, Archive, and Templates folders are protected. When a folder is deleted, all messages in the folder are also deleted 3. Select OK to empty the folder.
Messages ■ Voice messages If you subscribe to voice mail, your wireless provider will furnish you with a voice mailbox number. Save this number to your phone to use voice mail. When you receive a voice message, your phone either beeps, displays a message, or both. If you receive more than one message, the number of messages received is displayed. Save voice mailbox number To see or save your voice mailbox number, in the standby mode, select Menu > Messages > Voice messages > Voice mailbox number. .
Messages Automate voice mail Special characters, called dialing codes, can be added to phone numbers. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string. See "Insert dialing codes," p. 34. Voice mail services vary by service provider. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service.
Messages +— International prefix p— Pauses for 2.5 seconds before sending the numbers that follow w— Waits for you to press the call key before sending the numbers or codes that follow ■ Minibrowser messages To retrieve minibrowser messages, in the standby mode, select Menu > Messages > Minibrowser messages > With connect to launch the minibrowser, or Back to escape and return to Messages.
Contacts 7. Contacts The contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list. ■ View the contacts list 1. In the standby mode, select Contacts and one of the following options: Search—Find a name or select from a list. Add new—Add a contact to your contacts list. Edit name—Edit an existing name.
Contacts Memory status—View the amount of memory used in phone book. ■ Search In the standby mode, select Contacts > Search; highlight the contact you wish to view, and select Details. Fast search for a name 1. In the standby mode, scroll down to display your contacts list. 2. Press the key that corresponds to the first letter of the name for which you are performing a search. 3. Scroll up and down to highlight a contact, and select Details to view the details. ■ Edit contacts list entries 1.
Contacts Send bus. card—Send the contact as a business card to another phone. Send message—Create and send a message to the contact. Speed dial—Add the contact to your speed dial list. Edit name—Edit the name of the contact. View name—View the name of the contact. Delete—Delete the entire contact entry from your contacts list. Edit phone number Highlight the phone number you would like to edit, and select Options. ■ Add new contacts and numbers Save a name and number 1.
Contacts 4. To change the type (E-mail, Web address, Street addr.), select Change type in the options list. To change which phone number is the default number for the contact entry: 1. In the standby mode, scroll down to the entry you wish to change, and select Details. 2. Scroll to the number you wish to set as default, select Options > As primary no.
Contacts • To delete individual entries, select One by one, and scroll to the entry you wish to delete. Select Delete > OK to confirm. • To delete the entire contents of your contacts list, select Delete all > OK. Select OK to confirm or Back to return to Contacts. If OK, enter the security code, and select OK. See "Security settings," p. 56. ■ Set up speed dials You can associate any entry in the contacts list with a key from 2–9; then dial those entries by pressing and holding the assigned key.
Contacts ■ Voice tags For more information on setting up voice tags and other voice features, see "Edit contacts list entries," p. 37. ■ My phone number In the standby mode, select Contacts > My phone number to display the phone number of your device. ■ Caller groups You can add contact list entries to any of five caller groups, and assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic. Set up a caller group 1.
Contacts ■ Send and receive contacts To send and receive an entry in your contacts list, use text messaging, if supported by your wireless provider. Send a business card To send a business card as a text message to a compatible phone or other handheld device, do the following: 1. Highlight the entry from the contacts list that you wish to send, and select Details > Options > Send bus. card > Via text msg., and do one of the following: • Select Primary no.
My Stuff 8. My Stuff You can save pictures to folders in My Stuff and add new folders to the ones already there. Only devices that offer compatible multimedia message features can receive and display multimedia messages. Your device supports a digital rights management system to protect content that you have acquired. Content such as a ringing tone, can be protected and associated with certain usage rules, for example, the number of usage times or a certain usage period.
My Stuff 2. Scroll through the list of graphics or tones, select Options > Open, Delete, Move, Rename, Set as wallpap. (for graphics or image files), Details, or Sort to enter the folder submenus.
Settings 9. Settings Use this menu to change the time settings, call settings, phone settings, display settings, tone settings, enhancement settings, security settings, network, network services, and to restore the factory settings. ■ Profiles Profiles define how your device reacts when you receive a call or message, how your keypad sounds when you press a key, and more.
Settings 2. Select the profile you wish to activate and select Timed for timed expiration. 3. Enter the time in mm:ss for the profile to expire, and select OK. ■ Call settings Location information sharing Location information sharing is a network service and must be supported by your wireless service provider. See "Network services," p. 5, for more information. Location info sharing allows the phone to share position information over the network.
Settings Automatic redial Occasionally, your network may experience heavy traffic, which results in a fast busy signal when you dial. With automatic redial activated, your phone redials the number (number of times is specified by the network), and notifies you once the network is available. In the standby mode, select Menu > Settings > Call settings > Automatic redial > On or Off. Speed dialing To activate or deactivate speed dialing.
Settings Access no. + phone no. + card no.—Dial the 1-800 access number, phone number, then enter the card number (plus PIN if required). Access no. + card no. + phone no.—Dial the 1-800 access number, card number (plus PIN if required), then enter the phone number. Prefix + phone no. + card no.—Dial the prefix (numbers that must precede the phone number) and phone number, then enter the card number (plus PIN if required). 5.
Settings The phone calls the international dialing prefix you have stored in your phone and the phone number you have entered (for example, the phone calls 0011354789). Call summary Your phone can display the time spent on a call when you hang up. In the standby mode, select Menu > Settings > Call settings > Call summary > On or Off. ■ Phone settings Phone language In the standby mode, select Menu > Settings > Phone settings > Phone language, and select the language: English or Français.
Settings Touch tones are sent during an active call and can be sent manually from your phone keypad, or sent automatically by saving them in your phone. Set type 1. In the standby mode, select Menu > Settings > Phone settings > Touch tones > Manual touch tones. 2. Select one of the following options: Continuous—Sets tone sounds for as long as you press and hold a key Fixed—Sends tones of the duration you specify in the Touch tone length option Off—Turns off tones.
Settings When Help text activation in turned On, select a feature or menu, pause for 10 to 15 seconds, and wait for the help text to display. Use the scroll keys to view the complete help text, if necessary. ■ Display settings Wallpaper You can set your phone to display a background picture (wallpaper) in the standby mode. To activate or deactivate wallpaper, in the standby mode, select Menu > Settings > Display settings > Wallpaper > On or Off.
Settings deactivate the screen saver. You can set your phone to display a screen saver after a preset time or after a custom time (up to 60 minutes) of your choosing. 1. In the standby mode, select Menu > Settings > Display settings > Screen saver time-out. 2. Scroll to and select the option of your choice. 3. To set a custom time (up to 60 minutes), select Other, enter the custom time, and select OK. Display brightness You can change the brightness of your phone display. 1.
Settings Date Show or hide the date In the standby mode, select Menu > Settings > Time settings > Date > Show date or Hide date. Set the date 1. In the standby mode, select Menu > Settings > Time settings > Date > Set the date. 2. Enter the date, and select OK. Change the date format 1. In the standby mode, select Menu > Settings > Time settings > Date. 2. Scroll to Date format, and select a format. 3. Scroll to and select the Date separator. 4. Select a separator.
Settings Select Menu > Settings > Tone settings, and one of the following options: Incoming call alert—Select how the device notifies you of an incoming call. Ringing tone—Select the ringing tone for incoming calls. Ringing volume—Set the volume of your ringing tone. Vibrating alert—Turn the vibrating alert On or Off. Message alert tone—Select the tone for received messages. Keypad tones—Set the volume of your keypad tones (or turn them off). Warning tones—Turn warning and confirmation tones On or Off.
Settings Handsfree Scroll to and select an option, to enter the submenu and modify its settings. Default profile—Select the profile you wish to automatically activate when your phone is connected to a car kit. See "Profiles," p. 45. Automatic answer—Set so calls are answered automatically after one ring when a car kit is connected. Select On or Off. Lights—Choose to keep the phone lights always on or to shut off automatically after several seconds. Select On or Automatic.
Settings • TTY/TDD communications depend on network availability. Check with your service provider for availability and description of services. Make a call 1. In the standby mode, enter the number, and press the call key. 2. When the receiving party answers, begin typing your conversation on the TTY/ TDD. 3. Press the end key to end the call. Receive a call 1. Make sure the TTY/TDD device is connected to your phone. 2. Press the call key to answer the call, and type your responses on the TTY/TDD. 3.
Settings Restrict outgoing calls—Calls cannot be made: Select, Add restriction, Edit, or Delete. Restrict incoming calls—Calls cannot be received: Select or All calls. Activate or deactivate phone lock The phone lock feature protects your phone from unauthorized outgoing calls or unauthorized access to information stored in the phone. When phone lock is activated, Phone locked is displayed each time you turn your phone on.
Settings Lock code When you change your lock code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number. The preset lock code is 1234. If you enter an incorrect lock code five times in a row, your phone will prompt you for the 5-digit, security code.
Settings The activated feature code is now stored in your phone, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *633), or press the end key to return to standby mode. Once you enter a network feature code successfully, the feature becomes visible in the Network services menu. Call forwarding Call forwarding tells your network to redirect incoming calls to another number.
Settings Send own caller ID when calling If your wireless service provider supports this feature, you can prevent your number from appearing on the receiving party caller ID. In the standby mode, select Menu > Settings > Network services > Send own caller ID with next call > Yes or No. ■ Network The menu options you see in your phone are based on your service provider’s network. The network determines which options actually appear in the phone menu. Check with your service provider for more information.
Settings Analog only—The phone only works in analog mode. ■ Restore factory settings This option resets some of the menu settings to their original values. It does not delete data that you have entered or downloaded, or affect entries in your contacts list. In the standby mode, select Menu > Settings > Restore factory settings. Enter the security code, and select OK. See "Lock code," p. 58.
Tools 10. Tools Your phone contains features to help organize your everyday life, including an alarm clock, calendar, calculator, countdown timer, and stopwatch. ■ Alarm clock Set an alarm The alarm clock is based on the phone clock. The alarm sounds an alert for any time you specify. 1. In the standby mode, select Menu > Tools > Alarm clock > Alarm time. 2. Enter the time for the alarm (in hh:mm format), and select OK. 3. Select am or pm (if you select 12-hour format).
Tools With the phone on, select Stop to shut the alarm off, or select Snooze. The alarm stops for 10 minutes and Snooze on is displayed. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.
Tools 2. From the monthly view (with the go to date highlighted), select Options > Make a note, and one of the following note types: Meeting—Enter a subject, a location, and a start and end time. You can then set an alarm. Call—Enter a phone number, a name, and the time. You can then set an alarm. Birthday—Enter the person’s name, and year of birth. You can then set an alarm. Memo—Enter a subject and an end date and set an alarm. Reminder—Enter the subject you wish to be reminded about and set an alarm. 3.
Tools 9. Select Options > Send. Receive notes When you receive a calendar note in calendar-to-calendar (vCal) format, Calendar note received is displayed. When you receive a calendar note as a text message, a message notification appears in the standby mode. You can then view, save, or discard the note and set an alarm for any date and time. ■ Voice recorder This feature allows you to record, save, and listen to voice memos. The total available time is 30 seconds if no memos have been stored.
Tools 1. In the standby mode, select Menu > Organizer > Calculator. 2. Enter the first number in the calculation. Press # for a decimal point if necessary. Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character. 3. Enter the second number in your calculation. 4. Select Options (equals is highlighted). To perform a square or square root calculation, select Options > Square or Square root.
Tools ■ Countdown timer You can enter a specified countdown time (up to 99 hours and 59 minutes). When the time runs out, your phone sounds an alarm. The countdown timer only works when the phone is on. Set the countdown timer 1. In the standby mode, select Menu > Organizer > Countdown timer. 2. Enter the time (in hh:mm format), and select OK. 3. Enter a note for the timer, and select OK. The icon appears in the standby mode when the countdown timer is set.
Tools Measure time 1. In the standby mode, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start. The running time is displayed on the screen. 2. Select Split to note the lapsed time. The timer continues to run. The split time appears below the running time. If you split the time more than once, the new measured time appears at the beginning of the list. Scroll to see previous measured times. 3. Select Lap to note the lap time. The clock stops, then starts immediately from zero.
Games 11. Games Challenge yourself or a friend to one of the fun games in your phone. Some menus listed are network services. Contact Virgin Mobile for more information about networks. ■ Play a game 1. In the standby mode, select Menu > Games > Select game. 2. Scroll to a game, and select Options > Open or the call key. 3. Select one of the following options (if supported by the particular game): New game—Launch a new game. High scores—View the high scores for this game (if previously played).
VXL 12. VXL Your device has access to VXL, which includes selected services on the mobile Internet. You can access popular features, exclusive music, entertainment, information services, and much more. VXL is updated frequently. Check the Virgin Mobile web site at virgin.com/mobile, for availability and pricing. ■ Sign on to VXL At the start screen, select Menu > Extra Virgin. After a brief pause, your device attempts to connect to VXL.
VXL 3. Enter the emergency number for your present location (for example, 911). Emergency numbers vary by location. 4. Press Call. Disconnect To close your VXL connection, press and hold End.
PC Connectivity 13. PC Connectivity With the PC Suite you can, for example, create and send text and picture messages, and synchronize contacts and calendar between your phone and a compatible PC. Some of the features available in PC Suite are carrier dependent. Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.
Enhancements 14. Enhancements Check the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-7 or ACP-12. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer.
Enhancements • Retractable Headset (HS-10) Data • Data Cable (DKU-5) • CA-43 Cable • Desk Stand with Sync (DCV-15) Car • Full Car Kit (CK-6) • Car Installation Kit (CARK-126) • Mobile Holder (MBC-17) • Mobile Lighter Charger (LCH-12) • Headrest Handsfree (BHF-1) 74
Battery information 15. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose batteries as household waste. ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety.
Battery information 3.Scratch the side of the label to reveal a 20-digit code, for example 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/ batterycheck.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information ■ Operating environment Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Always keep the device more than 15.3 cm (6 in) from the pacemaker when the device is switched on. • Do not carry the device in a breast pocket. • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information The exposure guidelines for mobile devices employs a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit set by ICNIRP is 2.2 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
Additional safety information Charging times The following charging times are approximate with the BL-6C 1070 mAh Li-Ion battery: Travel Charger (ACP-12): up to 1 hour 45 minutes Standard Travel Charger (ACP-7): up to 3 hours 45 minutes Talk and standby times Operation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors.
IndexNumerics1-touch dialing 27Åalarm clock 76antenna 13anykey answer 50applications 85automate voicemail 39automatic redial 51automatic update of service 51auto-update 57Bback coverremoving 14replacing 14, 17banner 58batteries and chargers 90batterycharging 14charging times 96removing 14replacing 14, 17talk and standby times 96battery information 96business cards 31Ccalculator 80calendar 77call duration 45call forwarding 66call log 43caller groups 26calling cards 52callsanswering 19in-call options 20making
