User's Guide

[ 65 ]

Customize your phone

IF YOU SELECTED LOOPSET

The following options are available. Scroll to the option of your choice and

press Select to enter the option’s submenu and modify its settings.

• Use loopset - Enable use of the LPS-1 mobile inductive loopset. Scroll

to Yes or No and press Select.

• Default profile - Choose the profile you wish to be automatically

activated when a loopset is connected.

• Automatic answer - Calls are answered automatically after 1 ring

when a loopset is connected. Scroll to On or Off and press Select.

IF YOU SELECTED TTY/TDD

The following options are available. Scroll to the option of your choice and

press Select to enter the option’s submenu and modify its settings.

• Use TTY - Enable the use of a TTY/TDD device. Scroll to Yes or No and

press Select.

Note: If the loopset is enabled, you’ll be asked to disable the

loopset before enabling TTY/TDD. Press Yes to disable the loopset

(thus enabling TTY/TDD). Press No to leave the loopset enabled.

Connect TTY hardware

1 The TTY device

comes with a cable.

Plug the larger

end of this cable

into the input jack

on the TTY.

2 Plug the other end

of the cable into the

TTY adapter HDA-8.

3 Plug the HDA-8 into

the connector on the bottom of your phone.