Media Center Remote Control and Receiver/Transceiver User Guide (RC125, IR605/A, IR606)
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 INDEX 1. Introduction…………………………………………………………………………2 2. Appearance…………………….……………………………………………………2 3. Features…………..…………………………………………………………………3 4. Package Contents…………………………………………………………………3 5. System Requirements.....……………………………………………………………3 6. Installation and Operation……..…...…………………………………………….…4 7. Specifications………………….……………………………………………………5 8. Key Definition………………..……………………………………………………6 9. Troubleshooting………………..……………………………………………………9 10.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 Introduction： RC125 Media Center Remote Control with IR605/A Receiver/IR606 Transceiver is your best solution to control the MCE on your Desktop or Laptop. It is compatible with Microsoft® Windows® MCE certification and Green Button regulation. The easy connection between RC125 and IR605/A/IR606 makes your entertainment more joyful.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 Features： RC125 Remote Control 1. Microsoft® Windows® MCE certification and Green Button support 2. With all of the buttons and functions necessary for Microsoft® certification, including official Green Button. 3. Small USB dongle style receiver 4. 5. 6. Use standard Microsoft® drivers, no software to install.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 Installation and Operation： 1. Battery Installation -- Open the battery cover of the Remote Control and install 2 AAA batteries correctly. 2. Receiver Installation -- Plugging IR605/A receiver (with USB Port on it) into the USB port of your computer.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 Specifications： RC125 Remote Control: Operation Voltage：2.4V~3.2V；Battery：AAA battery x 2 Power Consumption with input signal：< 450mA Infrared Rays Frequency：38KHz；Infrared Rays transmission distance：7~10 meter Remote Control size：45 x 185 x 24 mm Remote Controller Button Number：48 buttons IR605/A Receiver: Receiver size: 43 x 22.1 x 16.2 mm Receiver Interface：USB Port Operation Voltage：4.75V~5.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 Key Definition： No.
Media Center Remote Control/Receiver/Transceiver No.
Media Center Remote Control/Receiver/Transceiver No.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 Troubleshooting： Question RC125 Remote Control doesn’t work Possible Reason Solution No battery installed, battery dead, or the batteries are not installed properly Un-correct MCE installation Un-properly connection between the receiver and the computer 9 Check the battery installation and correct it Check the installed MCE program Check the connection between the receiver (USB port) and computer (USB port) and correct it
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 Appendix – Learning Function ․ Setup of IR606, IR blaster, USB cable, TV tuner card, Set-Top Box (STB), and remote control 1. Plug the IR blaster and USB cable on the IR606 2. Connect the 4-in-1 video input cable to the TV tuner card then plug video cable (Yellow connecter) and audio cable (Red-White connecter) to the STB and TV tuner card individually.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 3. Attach the IR blaster close to the STB receiver 4.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 ․ Start to the Learning Function of IR606 5. Use your MCE remote control to start Windows Media Center and choose Tasks Settings 6. Choose TV 7.
Media Center Remote Control/Receiver/Transceiver 8. Confirm the TV Signal Setup 9. Start to Set Up Your TV Signal 10.
Media Center Remote Control/Receiver/Transceiver 11. Link to Internet to download the TV service setup options 12. Choose the way you receive the TV Signal 13.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 14. Before you set up your set-top box, you need to check the listed items 15. Select the input TV Signal 16.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 17. A message telling you that you are going to the identification process to check if your STB remote is already included in the MCE’s database 18. Please follow the instruction to identify the set-top box remote from number“0” 19.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 20. Make the set-top box remote aim at learning IR receiver under an efficient distance 21. Confirm whether you have a button to do the change 22.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 23. After the learning is done, pick up your Windows Media Center remote to go next. From now on, the MCE remote RC125 can replace the remote control of set-top box to switch channels 24. The maximum of digit numbers your set-top box can support 25. Let the IR blaster attached to the set-top box receiver and use your MCE remote control to select the channel you want.
Media Center Remote Control/Receiver/Transceiver RC125/IR605/A/IR606 26. Check whether the channel is changed correctly 27. Set the IR Signal Speed with channel up & channel down to make sure it works ok 28.
Media Center Remote Control/Receiver/Transceiver 29.
