User Manual

Wireless Platforms
CM/BU 9 (10)
RD-1/RD-2 handling guidelines for OEMs Print Date: 1/15/2007 Copyright © 2007 Nokia.
6.3 Antenna Disconnection
The antenna shall be disconnected according to the following steps:
1. Hook the u-shaped end of the Antenna Extraction Tool* under the female plug.
NOTE: The module shall remain seated in the host laptop prior to antenna disconnection
2. Gentle apply tension to the tool.
3. As soon as disconnection is noted relax the tension on the tool
4. Carefully withdraw the female plug ensuring that no load is place upon the coaxial cable.
* The Antenna Extraction Jig is a commercially available item see Figure 9
Figure 7: Antenna Extraction Jig Figure 8: Antenna Disconnection
Figure 9: Hirose Electric Company Ltd Extraction Jig