User Manual

Wireless Platforms

CM/BU 6 (10)

6 Installation

Prior to installation into the host laptop the laptop must be grounded and in a completely powered down state with

the battery and any external power supplies removed.

6.1 Insertion into PCI Express Mini Card Connector

The module shall be inserted according to the following steps:

1. Offer the module edge connector up and slide into the female PCI Express Mini Card receptacle such that

both corners of the module contact the respective corners of the receptacle concurrently.

NOTE: Different PCI Express Mini Card connectors may have prescribed insertion angles and these should

be checked prior to offering the module for insertion from the applicable manufacturer’s guidelines.

2. Gently slide the module into the receptacle under resistance is felt.

3. Press gently on the module at the point indicated below until the module is seated and a click is felt from

the retaining latches.

STEP: 1. 2. 3.

Figure 4: Card Insertion into PCI Express Mini Card Connector