User Manual

ENGLISH
3. If prompted, enter the PIN code of
your SIM card.
4. Check the network indicator light
to see whether a network
connection is available.
5. To connect to the internet through
a cellular network, select Internet
connection > .
To connect to the internet through
a wireless local area network
(WLAN or Wi-Fi), select View
network list and the desired
network. The indicator beside the
network name displays the signal
strength of the network. If a
padlock is displayed beside the
name, the network is protected and
you must give a password to use it.
Note: Using WLAN
may be restricted in
some countries. For
example, in France, you are only
allowed to use WLAN indoors. For
more information, contact your
local authorities.
During data transfer, the Internet
connection window shows the
duration of the current session,
and the total amount of data sent
and received during the session.
If the computer enters standby or
hibernation mode, data transfer
may stop. Using the device for data
transfer increases the demand on
computer battery power and
reduces the battery life.
6. Start using the connection with
the software you want.
7. To close the connection, in the
Internet connection window, select
.
To exit the application, select X.
This also closes the connection.
To minimise the application without
closing the active connection, select
. To restore the application
CS-19_QSG_FCC&IC_en1.fm Page 11 Wednesday, August 18, 2010 1:33 PM