99 Messaging 10. Messaging Messaging contains the following applications: Fax, Mail and SMS (Short Message Service). To start Messaging, press the Messaging application button on the communicator keyboard. The overall requirements for using fax, mail and SMS, applications are as follows: • The phone must be turned on. • The system you are using must support fax calls, data calls, and the Short Message Service. • The fax, data and Short Message Service service must be activated for your SIM card.
00 Messaging Messaging center Figure 76 Tip: You can move between the two frames with the Arrows or Tab key. The main view of Messaging has two frames: on the left is a list of the folders in the Messaging center, and on the right are the messages connected to the currently selected folder. Folders in the Messaging main view are: Inbox - Received faxes and short messages. Received mail appears in the Remote mailbox folder. Outbox - Messages which are waiting to be sent from the communicator.
To open a message, in the message list of the main view, go to the message and press Open. The message opens in the appropriate viewer, for example, a mail message opens in the mail viewer. Tip: You can also press Enter to open messages and folders. Manage folders You can create your own folders in Drafts, in your own folders and in the root of the folder list. You cannot create new folders in Inbox, Outbox or Sent. 1 2 3 4 5 Select the left frame in the main view of the Messaging.
Messaging 202 Tip: To choose the sorting order, press the Menu key and select View > Sorting order. Choose between Ascending and Descending. 1 Open the folder where you want to sort the messages and faxes. 2 Press the Menu key and select View > Sort by. 3 Choose from the following options: Message type/Sender/Recipient/Subject/Date/ Size/Priority. Inbox Figure 77 Tip: To reply to a message in the Inbox, press the Menu key and select Write > Reply. Unread messages appear in bold.
203 Messaging new calendar invitation new ringing tone new remote configuration data unread mail unread mail received from PC by synchronization priority high priority low message contains an attachment Outbox Figure 78 Statuses Faxes, mail and short messages waiting to be sent from the communicator can have the following statuses in Outbox: • Sending - The fax or short message is currently being sent.
204 Messaging Upon request - The mail, fax, or short message will be sent only if you specifically press Send now in the Outbox view. Waiting - The fax or short message is queuing to be sent and will be sent as soon as possible, for example, when the phone is switched on, signal strength becomes adequate, or the previous phone call ends. In the case of mail messages, Waiting shows that the message will be sent the next time you connect to your remote mailbox.
Write and send faxes, mail and short messages There are two ways you can start creating faxes, mail and short messages in the Messaging application: • Press any of the following commands in the main view of Messaging: Write fax, Write mail or Write short message. • Press the Menu key in the main view of Messaging and select Write > New message…. Then select the appropriate message type.
Messaging 206 Figure 79 Tip: You can select more than one contact at a time, see ‘Select several items at once’ on page 72. Tip: In the case of mail, you need to select the contacts to the appropriate fields in the dialog by pressing To, Cc or Bcc. 2 Search for a contact or contacts in the left frame and press Select. The right frame shows the contacts you have already selected; to remove a contact, select it and press Remove. 3 Press Done.
207 Messaging To delete a checked recipient, move the cursor to the end of the entry and press backspace. Avoid low memory You should regularly delete messages from your Inbox and Sent folders and delete retrieved mail from the communicator memory to free up memory space. WARNING! If you do not use this method to delete mail messages from your communicator, the messages may also be permanently deleted from your remote mailbox.
208 Messaging Note: If you create a new message store to a memory card and remove the card a new storage must then be created in the internal memory when new messages are received. This leads to a situation where you cannot move messages from one memory storage to another, since only one message store at a time can be in use. Fax Tip: For more advanced word processing, use Document instead of the fax editor. You can write and send faxes in the fax editor.
3 Press Recipient to select the recipient. A fax can have only one recipient. 4 If you wish to adjust the sending options of the fax, press Sending options. For details, see Fax settings on page 211. 5 Press Send. Note: Voice calls are not possible when a fax is being sent or received. Tip: To define a specific date and time when the fax will be sent, select Scheduled in the Send fax option. Fax cover page You can attach a cover page to the fax you are currently creating or editing.
Messaging 210 When a new fax is received, you hear a tone - unless the system is set to a silent profile - and an information note is shown on the display. Tip: You can zoom and rotate in the fax viewer. Each press of Rotate rotates the fax 90 degrees clockwise. Press Open to view the fax. To open a fax received earlier, go to the Inbox, select the fax and press Open. Note: If a fax is not received completely due to some failure, it is named Incomplete fax.
Fax polling You can retrieve faxes from a remote fax box by using Fax polling, if available in the system. It allows you to make a fax call to a fax machine and then receive information by fax. Retrieve faxes from a remote fax box 1 Press the Menu key in the main view of Messaging and select Receive > Fax > Dial fax poll. 2 Type in the fax number for the remote fax box, or choose the number by pressing Recipient. 3 Press Call to call the number.
212 Messaging Send fax: Defines when the fax will be sent. The options are Immediately/Upon request. Advanced page Resolution: The resolution of the sent and received faxes. The options are High/ Standard. ECM: Defines whether or not the Error Correction Mode is used when faxes are sent. If set to On, any pages containing errors are automatically returned to sender, until the defects are corrected. The options are On/Off. Resend: Defines which pages will be sent again if the fax sending has failed.
Mail settings Any changes you make to mail settings affect the way your mail is sent and received. To connect to your remote mailbox, you need to define a mail account on your communicator: 1 Press the Menu key in the main view of the Messaging center and select Tools > Account settings…. 2 Press Create new. A selection list of possible account types opens. 3 Select Mail and press OK. A dialog with four pages opens.
214 Messaging Password: Type in your password. If you leave this field blank, you will be prompted for password when you try to read mail in your remote mailbox. My mail address: Type in the mail address given to you by your service provider.The address must contain the ‘@’ character. Replies to your messages are sent to this address. Internet access: The IAP connection used for the mailbox. Choose an IAP from the list. To create an IAP, see ‘Setting up your Internet access point’ on page 173.
Retrieve Retrieve: Specifies what will be retrieved from the remote mailbox when the connection is established. The options are Mail headers (stay online)/ Messages/Messages and attachments. The Messages option is available only if the mailbox type is IMAP4. Max. size of mail: The maximum size of a message which is retrieved. The minimum is 1 KB and maximum 1000 KB. Sync. mails in Inbox: Specifies the number of message headers to be retrieved from Inbox of the remote mailbox.
Messaging 216 Request read report: The options are Yes/No. If you choose Yes, you will receive a notification when the recipient has opened your mail. You can only receive a notification if the recipient’s e-mail application supports this feature. Allow report requests: The options are Yes/No. If you choose No the sender of a message you receive will not get a notification, when you open the message. Copy to my mail address: The options are Yes/No.
Write and send new mail 1 Press Write mail in the main view of Messaging. The mail editor opens, see figure 82. Tip: If you cannot send mail from your communicator, check first that your mail address is correct in Mail settings. See page 213. Figure 82 2 Write the mail message. 3 Press Recipient to select the recipient or recipients of the message, or type in the name or mail address into the To:, Cc: and Bcc: fields. You can move from one insertion field to another by pressing the Tab key.
Messaging 218 Tip: To hide or show Cc: and Bcc: fields in the mail editor, press the Menu key and select View > Show Cc field or Show Bcc field. To: - Message is sent directly to the recipient.Cc: - A copy of the message is sent to the recipient, and the recipient’s name is visible to other recipients of the message. Bcc: - A copy of the message is sent to the recipient, but the recipient’s name is not visible to other recipients of the message. .
Sending options The options in the Sending options dialog contain values set in mail settings, as explained on page 219. Press Sending options to open the dialog. Any changes you make in this dialog affect only the current mail message you are about to send. Note: Changing the options in the Sending options dialog affects the format of message when it is opened by the recipient. For example, the format may affect the legibility of the characters. Message page Priority: The priority of a message.
Messaging 220 Retrieve mail Tip: Delete mail regularly from your communicator to free up memory space. For more information, see ‘Avoid low memory’ on page 207. Mail addressed to you is not automatically received by your communicator, but by your remote mailbox. To read your mail, you must first connect to the remote mailbox and then select the messages you wish to retrieve into your communicator. Connection to a remote mailbox is established via a data call.
1 Go online. 2 Press the Menu key and select Receive > Folder subscriptions…. A list of folders in the remote mailbox opens. 3 Select the folder. 4 Press Subscribe. If you have already subscribed to the folder, press Unsubscribe to cancel the subscription. 5 Press Go offline and Go online to include the new subscribed folders in the list. Tip: To create new folders in your remote mailbox, go online, press the Menu key and select File > Folder.
Messaging 222 Reply to mail Tip: To forward mail, press the Menu key and select File > Forward. Tip: To search and replace text in a mail, press the Menu key and select Edit > Find…. 1 Select the mail message in Inbox and press Open. The mail viewer opens. 2 Press Reply. The mail editor opens. If you wish to reply to all the recipients, not just the sender of the mail message, press the Menu key and select File > Reply to > All recipients. 3 Edit the message in the mail editor and press Send.
Messaging 223 Mail attachments You can send most documents and messages you write in the other applications of your communicator as mail attachments. WARNING! Mail attachments may contain viruses or they can otherwise be harmful to your communicator or PC. Do not open any attachment, if you are not sure of the trustworthiness of the sender. For more information, see ‘Certificate manager’ on page 262 Add mail attachments 1 Press the Menu key in the mail editor and select Attachments > Insert file….
Messaging 224 Working online and offline Working online means working with your communicator connected to a remote mailbox via Internet connection. When you work offline which means that your communicator is not connected to a remote mailbox, you can delete only messages, not folders. When online, you can delete, rename or create new folders in your remote mailbox.
Messaging 225 Mail synchronization with your PC Synchronization is the process of making the contents of your mail messages and mail folders identical on both your communicator and your PC. This is done by copying and combining information between the two machines. For more information, see PC Suite Guide on the sales package CD-ROM. Mail synchronization copies the messages between your communicator and your PC E-mail program to allow you use either machine for reading and replying to messages.
Messaging 226 Convert to PC or Internet mail Tip: You can view and edit PC mail just like Internet mail on your communicator. Note: HTML messages cannot be converted since PC mail does not support the sending of HTML messages. You must change the message type to plain text or non-MIME type in the Sending options dialog, before you can convert the message to PC mail. See page 226 for more information. PC and Internet mail appear together in the folders.
227 Messaging Note: If you want to send text you have written or edited in another application as a short message, all embedded objects or any rich formatting will be lost. You cannot send attachments as short messages, either. Write and send a new short message Note: You cannot change the font, style or format of short messages. 1 Press Write short message in the main view of Messaging. The SMS editor opens, see figure 83.
Messaging 228 Tip: To define a specific date and time when the short message will be sent, select Scheduled in the Send short message option. 4 If you wish to adjust the sending options of the short message, press Sending options. A dialog with two pages, Sending options and Advanced opens. For details, see SMS settings on page 229. 5 Press Send. Receive and read short messages Tip: Your Inbox shows the date of received short messages and the time of the short messages received on the current day.
Messaging 229 SMS settings Any changes you make to SMS settings affect the way in which your short messages are sent and received. 1 Press the Menu key in the main view of Messaging and select Tools > Account settings…. 2 Select Short message and press Edit. A dialog with two pages opens. Define the following: General page Press Service centers, which opens a dialog where you can define new message centers, as well as edit and delete existing ones. All message centers are listed by name and number.
Messaging 230 Advanced page Reply via same center: This system service allows the recipient of your short message to reply using your message center. If you chooseYes and the recipient replies to your message, the return message is sent using the same service center number. This requires that the recipient has subscribed to the Short Message Service, is able to a reply to a message, and uses a device which supports this feature. Note also that the system must support this feature.
11. Office Office contains the Document, Sheet, and Presentation viewer applications, which are all compatible with Microsoft Windows. Office also contains a File manager application for file and folder management tasks like moving, copying, and renaming files and folders. Figure 84 Document You can use Document to write new and edit existing text documents. You can insert and view images and other files in the documents. You can also send and receive documents as fax, SMS, mail, PC mail, or via infrared.
Office 232 Create a new document Tip: You can use the clipboard command shortcuts Ctrl+x, Ctrl+c, and Ctrl+v to cut, copy, and paste text. When you open the Document application, a new document is opened. You can start writing immediately. You can modify the style of a document on a font and a paragraph level. You can use different fonts, font sizes, and styles.
233 Office 3 Select a style option from the list and press Set: These are the default values of the style options in the list: Style option Font Point size Bold Italics Under lined Justification Normal URW Sans 12 pt Off Off Off Left Header URW Sans 10 pt Off Off Off Left Footer URW Sans 10 pt Off Off Off Left Heading 1 URW Sans 16 pt On Off Off Left Heading 2 URW Sans 14 pt On Off Off Left Heading 3 URW Sans 12 pt On Off Off Left Title URW Sans 18 pt On
Office 234 Templates Example: You may have a company template which shows the company name and defines a particular layout. You can use templates and save documents as templates when creating and editing documents. To select a template, press the Menu key and select File > Templates > Select template…. A list of available templates opens. Select a template and press OK. To save a document as a template, press the Menu key and select File > Templates > Save as template….
235 Office Note: Objects in a document are not links but embedded attachments, which may increase the file size of the document dramatically. Hide or make visible text markers To hide or make visible markers that are used in editing within the document, proceed as follows. 1 Press the Menu key and first select Tools > Preferences…. A dialog with two pages opens.
236 Office Sheet In Sheet you can work and store your data in a file that is called a workbook. Each workbook contains at least one worksheet. A workbook can also contain chartsheets; a chartsheet is a spreadsheet file containing a chart that is based on data from a worksheet. Sheet can open files created with recent versions of Microsoft Excel for Windows. Note that not all features and formatting of the original files will be supported.
Entering data To enter data, select a cell with the Arrows key and start typing the data in the selected cell. To confirm what you have entered into a cell, press Enter, OK, or go to another cell with the Arrows key. To dismiss the action, press Esc or Cancel. You can also enter a formula to perform operations on worksheet data. Sheet application provides some predefined, or built-in, formulas, which are know as functions. To insert a function, press Insert function. A dialog opens. See Figure 87.
Office 238 Example: You might want to sum up figures in cells C2 to C4 in cell C5; select cell C5, press Point reference and select the cell range from C2 to C4. Press Enter or OK to confirm the action. The SUM will now appear in C5. In a formula, you can enter constant values or cell references. A cell reference tells Sheet where to look for the values or data you want to use in the formula. To enter a reference to a cell or cells in a formula: 1 Go to the cell you want to edit, and press Edit.
239 Office The selection is cleared when you press the Arrows key or Tab key. Insert cells 1 Select a number of cell(s) that you want to insert into the worksheet. 2 Press the Menu key and select Insert > Cells. A dialog opens. 3 Define whether you want the inserted cell or cells to appear above (Shift cells down) or left (Shift cells right) of the selected range. To insert an entire row(s) or column(s), select either Entire row or Entire column.
Office 240 2 Press Clear. A lists of choices appears. 3 To clear both the contents and formats of the cell or cells, select All. To clear only the contents of the cell or cells, select Contents. To clear only the formats of the cell or cells, select Formats. Adjust column width or row height 1 Select the column(s), or row(s). 2 Press the Menu key and select Format > Column width… or Row height…. 3 To increase column width, press > on the Arrows key as many times as necessary.
Change the appearance of cell borders 1 Select the cell or cells. 2 Press the Menu key and select Format > Cell appearance > Borders. A dialog opens. 3 Define the following options: Outline, Top, Bottom, Left, Right, and Line color. Change number format 1 Select the cell or cells. 2 Press the Menu key and select Format > Numbers. A dialog opens. 3 Choose the required format from the list. Depending on the format you choose, you may define the place of the decimal.
242 Office 2 Define the following options: Break at column and Break at row. Note: Since the break is placed above and on the left side of the selected cell, you cannot insert a page break when the cell A1 is selected. Name cells Tip: To change viewer preferences, press the Menu key and select Tools > Settings. Set the following options on or off: Show gridlines, Show row headers, Show column headers, Automatic recalculation, Show zero values, and Show pagination lines. 1 Select the cell or cells.
Office 243 Chartsheets Create chartsheets There can be seven different kinds of charts: Line, Column, Stacked column, Bar, Stacked bar,X/Y scatter, and Pie. 1 Select a range of cells on a worksheet. These will provide the data for your new chartsheet. 2 Press the Menu key and select Insert > New chart. A dialog opens. 3 Define the following: Chart name, Chart type, 3-D, Background color, and Axis color. 4 Press Close to create a new chartsheet and Esc to dismiss it.
Office 244 Figure 90 5 Press Close to confirm the changes or Esc to dismiss them. Note: You can select only one object at a time. Replace chartsheet data Tip: To define the general appearance of a chart, press Chart settings. Define the page style and name in the two pages of the dialog which opens. You can replace the data on which your chartsheet is based. 1 Press Sheets/ Charts and select the worksheet your chart is based on.
Office 245 View a presentation Press Open in the Presentation main view to select and view a document. To close the application, press Close. When a document is opened, the top of the first slide is shown. To view the next slide, press Next or Enter. To view the previous slide, press Previous. To scroll the current slide, use the Arrows key. Outline view To get an overview of the whole presentation, press Outline view. This opens up a view where the text content of the presentation is in a list format.
Office 246 View the presenter’s notes To view the presenter’s notes along with the slides, press the Menu key and select View > Notes view. File manager Tip: Use File manager together with a memory card to remove files and folders from the communicator memory and thus free memory. See ‘Back up and restore data to and from the memory card’ on page 251. You can use File manager to manage the contents and properties of various folders.
247 Office To show or hide subfolders in the folder list frame, press < and > on the Arrows key. The - and + signs in front of the folder icons indicatewhether the subfolders are shown or hidden. Folders without either sign have no subfolders, and you can use the Arrows key to switch between the folder view and files view. Note: Multi-selection is not possible in the folder list frame. Files view The file list on the right shows all the files in the source or folder currently selected in the left frame.
Office 248 Figure 93 2 To view any possible subfolder, select it and press Open. 3 To view parent folders, press Esc. 4 Press Close folder to return to the main view. The title of the folder content view shows the path name and the number of files and subfolders in the folder, together with the total size of all the files in the folder. This view shows the name, last modification date and time, and the size of a particular file. The icon in front of the name indicates the type of file or subfolder.
Moving files and folders 1 Select folders or files that you want to move and press Move in the main view of File manager. A list of folders opens, as shown in Figure 94. Figure 94 2 Search for a target folder with the Arrows key. To hide or show the subfolders of a folder, press Collapse and Expand respectively. You can also navigate in the folder list with the Arrows key and +/ - keys. To create a new target folder, press New folder. 3 Press OK to confirm the move and Cancel to dismiss it.
Office 250 Rename files and folders 1 Select the file or folder in the main view of File manager. 2 Press the Menu key and select File > Rename. The cursor now appears at the beginning of the selected file or folder name. 3 Rename the file or folder. 4 To confirm the changes, press OK. To dismiss the changes, press Cancel. View the properties of files, folders, and drives Tip: In the Properties dialog, you can also change a file into hidden or readonly state or a folder into read-only state.
Tip: You can search according to time period, start and end time, and the file type. Figure 96 Press Change to change the value of a list item. When ready, press Close. 5 Press Find to start the search. To interrupt the search, press Stop. 6 When the search is over, press Open to open the folder or file found. To start a new search, press New find. 7 To return to the main view, press Close.
Office 252 To be able to back up to and restore from a memory card, the card should be inserted in the communicator. For details, see ‘Inserting the memory card’ on page 71. 1 Press the Menu key and select Memory card > Backup to memory card… or Restore from memory card…, depending on what you want to do. A dialog opens. 2 If you are making a backup, look for a backup folder on the memory card by pressing Change or type in the name of a new folder in the Backup folder field.
253 Extras 12. Extras Extras contains the following applications: Calculator, Clock, Control panel, Recorder, Imaging, Cell broadcast, Video player, and Fax modem. Most of the new applications that you install will be added to the Extras application group. For more information on applications available on the sales package CD-ROM, see Software on CD-ROM Guide in the Using Nokia 9290 Communicator section of the CD-ROM.
Extras 254 Tip: To choose the clock type, press the Menu key and select View > Clock type > Digital or Analog. Set an alarm Tip: To turn off a sounding alarm, press Stop or any key on the keypad of the phone cover. Press Snooze to silence the alarm for five minutes. 5 Press Done to accept the set alarm. Tip: The world map shows the currently selected city in cross hairs. 1 2 3 4 Press Alarm clock in the main view. An alarm clock view opens. The currently active alarms are listed next to the clock.
Note: For more detailed information about Clock, see the Nokia 9290 Communicator help. Calculator There are two modes in Calculator: desk calculator for simple arithmetic operations and scientific calculator for more complicated mathematical calculations. There are two ways to perform calculations, either by typing the characters in the input field or selecting symbols from the function map. A calculation is executed by pressing Enter or =.
Extras 256 Note: For more detailed information about Calculator, see the Nokia 9290 Communicator help. Control panel In the Control panel you can view or modify the following: Security, Data call restrictions, Data call restrictions, Profiles, Data call restrictions, Certificate manager, Date and time, Install/Remove software, Internet access, About product, Memory, Regional settings, and Default folder Modifying these features affects the operation of your communicator across all the applications.
IMPORTANT: The default lock code is 12345. For security reasons, it is imperative that you change the lock code. Keep the code secret and in a safe place, separate from the communicator. The codes are shown as asterisks. If you are changing a code, you will be prompted for the current code and then the new code twice. PIN code request: If you set the PIN code request On, the communicator requests that you enter the code every time you turn on the phone.
Extras 258 Tip: Changing the PIN code requires that PIN code request is selected, the phone is on, and that there is a valid SIM card inserted. Lock if SIM card is changed: If set On, every time the phone is switched on this security option checks whether the SIM card in the communicator has been changed. If the SIM card has been changed and the new SIM card has not been used with your communicator previously, the communicator locks itself until the lock code is correctly entered.
Restriction password: This setting allows you to change the restriction password. If you enter an incorrect password three times in succession, the password is blocked and you must ask the system service provider for a new password. Note: Avoid using codes that are similar to emergency numbers to prevent accidental dialing of the emergency number. Tip: Changing the restriction password requires that the phone is on and the Call restriction service is activated for your SIM card.
Extras 260 Accessories Here you can define some of the settings when you use the Nokia 9290 Communicator with Advanced HF Car Kit CARK109 or Headset HDC-8L. For other information on accessories for Nokia 9290 Communicator, see the accessories section of this guide. Define the accessories options as follows: 1 Double-click the Accessories icon in the Control Panel. A dialog opens 2 Select the accessory options that you want to modify. The options are Headset/ Car kit. Press Edit.
Profiles Here you can edit profiles. Profiles define the tones and sound level of your communicator in different operating environments. For details on profiles, see ‘Profile settings’ on page 120. Display Here you define the appearance of the display. Contrast page Figure 101 Press + and - to adjust the bar you are editing. Contrast level: Pressing + increases and - decreases the contrast of the display. Brightness: The brightness level of the display. There are five levels to choose from.
Extras 262 Tip: Selecting a low brightness level and a short time period for the last two options saves the battery and increases the operation time of the communicator. Brightness period: A time period after which the display will blank out if the device remains inactive. The options are 2 min/4 min/6 min/8 min/10 min. Colors page Color palette: The display color scheme. The options are Blue/Red/Green/Grey. Background pattern: The background image of the command button area.
The main view lists the currently available certificates and their validity information. Note: Certificates have a restricted lifetime. If a certificate is marked Expired even if it should be Valid, check that the date and time in your communicator are correct. Define the usage of the certificate 1 Select the certificate and press View details. A dialog with certificate details opens. 2 Press Trust settings. A dialog opens.
Extras 264 4 The Fingerprint: field uniquely identifies the certificate. Contact the help desk or customer service of the owner of the certificate (see step 2 above) and ask for the MD5 fingerprint of the certificate. Compare the fingerprint with the one shown in the dialog. If they match, the certificate is authentic. Note: Use this authentication procedure each time you add a new certificate. Add or delete certificates To add a new certificate, press Add.
265 Extras When you open the Install/Remove application, the Installed software page lists all of the software packages that have been installed, with their name, version number, type, and size. Press Certificate Info to display the certificate details of an installed software package that has a digital signature and a certificate.
266 Extras WARNING! Only install software from sources that offer adequate protection against viruses and other harmful software. To help you, the software installation system on the Nokia 9290 Communicator uses digital signatures and certificates on software packages. See page 264. If you are installing software without a digital signature or a certificate, the communicator warns you of the risks of installing software, as shown in figure 102.
Remove software 1 To remove an installed software package from your communicator, select the software package you want to remove from the Installed software page and press Remove. 2 A dialog appears asking for your confirmation. Press OK to remove the software. Note: Some software packages update existing software and cannot be removed.
Extras 268 Installation settings On the Preferences page, you can select options related to software installation. You can define the following: Delete installation file after use - If set to Yes, the software package installation file (that ends in.sis) will be deleted from the device after installation. If you download software packages using the WWW browser, this may be helpful in reducing the amount of required storage space.
About this product Here you can scroll to see copyright information on the Nokia 9290 Communicator. Memory Here you can view the amount of free memory for storing data and installing new software. You can scroll and view the memory consumption of the following details: Documents, Spreadsheets, Sounds, Faxes, Mails, Short messages, Calendar data, Contacts, Images, Installed applications, and Other file types.
Extras 270 Default folder With the Default folder, you can define the folder which acts as a default saving folder whenever you wish to save a document in your communicator memory. For details on how to manage your files and folders, see ‘File manager’ on page 246. Recorder Tip: When you have recorded sounds and speech, you can set them as ringing tones. See page 140. The Recorder allows you to record telephone conversations and voice memos. You can also listen to your recordings and other sound files.
271 Extras You can change the volume level of the Recorder application by pressing the ∧ and ∨ keys on the Arrows key. You can also edit sound files by using the commands in the Edit menu. WARNING! Obey all local laws governing recording of calls. In some states it is unlawful to record a phone conversation without first advising all call participants. Note: For more detailed information about Voice recorder, see the Nokia 9290 Communicator help.
Extras 272 Tip: If you have images or albums in the \Documents\Photo gallery\ directory on an inserted memory card, they also will appear in this view. Figure 104 Note: Albums can contain only images, not subalbums. You can also receive images via IR. For details, see ‘Receive images via infrared’ on page 274. Create a new album 1 Press the Menu key and select File > New album…. A dialog opens. 2 Define the following: Name: Name of the album. 3 To save the album in the communicator, press Create locally.
273 Extras 4 Press Close to return to the thumbnail view. Move images to and from albums 1 2 3 4 5 6 Select the image or images in the thumbnail view with the Arrows key. Press the Menu key and first select Edit > Copy or Cut. Press Close album. Open the target album. Press the Menu key and select Edit > Paste. If the target album already has an image or images with the same name, a confirmation note appears asking you if you wish to replace the existing image.
274 Extras 3 To save the frame as an image, press the Menu key and select File > Save as…. Select Selected range. 4 Select the folder you wish to save in, give a name for the new image file, and press OK. Resize images 1 Press the Menu key and select Tools > Resize…. A dialog opens. 2 Scroll with the Arrows key to select the new size and press Select or press Best fit to fit the image horizontally to the screen.
275 Extras You can find NIM format files on the CD-ROM in the sales package. Alternatively, to convert a common video file format such as AVI to NIM format, use the Multimedia converter application. You can find this application on the CD-ROM. For more information on installing files from the CD-ROM, see page 81. IMPORTANT: Video player is pre-installed on the memory card contained in the sales package. It will not work if you remove the memory card. The main view of Video player is shown in figure 105.
Extras 276 Figure 106 To start or stop receiving CBS messages, in the main view of Cell broadcast, press Reception on or Reception off. Tip: You can search for different topics. Enter a name of a topic in the search field. Press Read to read messages and press Next or use the commands in the View menu to browse for more messages. To subscribe, scroll to a topic and press Subscribe. A check mark is displayed in the box on the left-hand end of the topic. To unsubscribe, press Unsubscribe.
To change the name of the list that is open, press the Menu key and select List > Rename list… Note that the reception must be turned off. Tip: You can sort the topics by pressing the Menu key and selecting a sorting command in the View menu. Open topic lists To open a different list, press the Menu key and select List > Select topic list. In different topic lists, you can still subscribe and unsubscribe topics and set them as hot topics.
Extras 278 Fax modem You can use the communicator as a fax modem with a compatible PC. Your communicator can be connected to a PC via serial cable or by using an infrared connection. Before your PC can recognize the communicator as a fax modem, you need to install a new modem configuration for your PC. Please refer to your operating system manual for more information. During the installation you may be asked to enter the path to the modem information file. The path on the sales package CDROM is: \ Softwar
6 Select the option Don’t detect my modem; I will select it from a list 7 Click Have disk... 8 Click Browse and locate the CD-ROM drive with the Nokia 9290 CD-ROM. 9 On the CD-ROM, locate a folder Software for PC/Modem drivers 10 In the Modem drivers folder, select Mdmn9290.inf file and click Open or OK. 11 In the Install from disk dialog, Click OK. 12 In the Install New Modem dialog, select Nokia 9290 Communicator (Cable).
Extras 280 19 Your communicator is now ready to be used as a fax modem. Press Activate to activate the Fax modem. Fax modem settings To open Fax modem, press the Extras application button, select Fax modem, and press Open Note that an active PC connection using the fax modem is disconnected after 20 minutes if no data is sent or received. However, an active call is not automatically disconnected. Note: You cannot change fax modem settings if the fax modem is activated.
Parity: A parity error-checking procedure. The default option, None, can typically be used. Stop bits: Defines number of stop bits used. The default option, 1, can typically be used. Flow control: It is recommended to select Software. This setting needs to be the same in you PC as well. Operating system page Windows 2000: If you are not using Windows 2000, press Done and select No. The rest of the options on the page are dimmed. If you are using Windows 2000, select Yes.
Extras 282
13. Accessories guide Original Nokia accessories ensure the best possible operation of your Nokia mobile phone in various conditions. The Nokia 9290 Communicator accessories have been designed for different users and communication needs. Note: Use only batteries, chargers, and accessories approved by the communicator manufacturer for use with this particular communicator model. The use of any other types will invalidate any approval or warranty applying to the communicator, and may be dangerous.
284 Accessories guide The High Power Battery BLL-3 is a slim, powerful and durable 1300 mAh Li-Ion battery. This battery provides you with a talk-time of 4-10 hours and stand-by time of 80-230 hours, depending on usage. The combined weight of the Nokia 9290 Communicator with battery is 244 g, (approximately half a pound). Performance travel charger ACP-12U Figure 108 Tip: This charger is especially suitable for active travellers.
Advanced desktop stand DCH-10 charging slot for spare battery infrared port Figure 109 The Advanced Desktop Stand DCH-10 provides a convenient way to • charge the battery when it is attached to the communicator • connect to a compatible PC for data transfer. It has an infrared port on the left side of the stand; see Figure 109. The stand also has a slot for charging batteries separately from the communicator; this is especially convenient for charging spare batteries.
Accessories guide 286 Charge a spare battery with the desktop stand 1 Plug the Performance Travel Charger into the stand. 2 Insert the spare battery in the second slot, the golden contacts first. First press the battery downwards, then push it slightly backwards, until it clicks into place. 3 Plug the charger into a mains outlet. Check that the light on the left of the stand is on. The red light indicates that charging is in progress. When the battery is charged you will see a steady green light.
4 On the PC, start either the PC Suite for Nokia 9290 Communicator program, or the Fax/Modem application. You can also synchronize data between your communicator and an organizer program on a compatible PC with a single press of the button. For more information, see the PC Suite Guide in the Using Nokia 9290 Communicator section of the sales package CD-ROM.
288 Accessories guide Vehicle accessories Advanced HF car kit CARK109 Figure 110 Tip: Battery charging times are the same as those for the Performance Travel Charger ACP-12U. The Advanced HF Car Kit CARK109 offers a convenient handsfree option in a car. The car kit provides charging for your communicator. The car kit must be installed by qualified personnel.
Accessories guide 289 Figure 111 The kit consists of the Advanced Active Car Holder CRM-1 (shown in Figure 111), Advanced HF Unit HFU-2, Microphone HFM-8 and External HF Speaker HFS-12. In addition you can use an optional Handset HSU-1 for privacy and the optional Antenna Set AMD-2 for improved reception and increased operation (both items supplied separately). Place the communicator in the holder 1 Close the cover of the communicator and turn the antenna to a closed position.
Accessories guide 290 2 If you set the Automatic answer feature on in the Car profile, the communicator will automatically answer incoming calls. Switch from handset operation to handsfree operation Press the Options selection key once and replace the handset in 5 seconds. If you do not press Options before replacing the handset, the call will end. End a call Press , or, if the handset is installed, replace the handset.
Mobile charger LCH-9 Figure 112 The Mobile Charger LCH-9 provides an easy and convenient way to charge the communicator battery in a vehicle. It is suitable for most vehicles’ cigarette lighter sockets. Plug the lead from the mobile charger into the bottom connector of the communicator.
Accessories guide 292 Wearables Headset HDC-8L Figure 113 The Headset HDC-8 offers private headset audio operation. With the remote control button, which is located in the microphone part of the headset, you can answer and end a call. The headset connects directly to the connector at the bottom of the communicator.
Carrying cases Carry case CSL-25 Figure 114 There are two different carrying cases designed especially for the Nokia 9290 Communicator. The case shown in Figure 115 (CSL-26) has a convenient shoulder strap. Both are available from Nokia dealers.
Accessories guide 294 Carrying case CSL-26 Figure 115 Mobile office Memory card The 16 Mbyte postage stamp sized memory card provides removable storage for the communicator. The memory card increases the available memory for data and software applications. For example you could load new applications to the communicator and save files such as images, wav sounds, faxes and documents. You could also use a memory card for different applications or address books.
Note: The memory cards used in Nokia 9290 Communicator are not compatible with older models of Nokia communicator, but you can use the cards used in Nokia 9110i Communicator in the model 9290 after formatting them. RS-232 Adapter cable DLR-2L Figure 116 This versatile adapter cable provides convenient computer connectivity for data transfer with your Nokia 9290 Communicator. It connects to the RS-232 serial port of a compatible computer. It can also be used with the Advanced Desktop Stand DCH-10.
Troubleshooting 296 14. Troubleshooting You can visit Forum Nokia at www.forum.nokia.com for information and support material related to the communicator. WARNING! You must backup all your data on the communicator BEFORE sending it in for repairs. All hardware is sent back to you clean. Nokia is not responsible for any data that is on the machine when it is sent in. Please call Customer Care before sending in your communicator. 1.
Try to switch on the phone by pressing the key for several seconds. Check that the flight mode is not active. For more information see ‘Flight profile’ on page 133. Restart the communicator by removing the battery, waiting thirty seconds, and replacing it again. Try charging the communicator. If you see the battery level indicator on the phone but the phone does not work, contact your local Nokia dealer. Check the signal strength indicator: you might be outside the system service area.
298 Troubleshooting 3 When you see the Nokia 9290 Communicator Welcome screen, immediately press and hold down the Ctrl+Shift+I keys. The I key should be pressed last. 4 Temporary files are deleted. This empties the cache, removes cookies, resets plugin registrations and resets the settings you have made in some of the applications including all Internet and profile settings, Desk shortcuts and display settings. All other applications and files stay intact.
If you get the message INVALID SIM CARD, your SIM card cannot be used in the communicator. Contact you dealer or system service provider. Check the status of your call restrictions and forwards, see ‘System services settings’ on page 124. The phone may be busy: data or fax is being sent or received, or the communicator is being used as a fax modem. Wait for the data/fax transmission to end, or drop the call by pressing the key on the phone keypad. 6.
Troubleshooting 300 If you cannot select a contact in the Telephone, Fax, SMS or Mail directory, the contact card does not have a telephone number, fax number, wireless phone number or an e-mail address. Add the missing information to the contact card in the Contacts application. 9. Cannot send or receive faxes, short messages or mail Make sure that you have subscribed to these system services. The phone may be off, or the communicator is low on memory.
Mail sending: You have not subscribed to a remote mailbox service, or the mail server delivering your mail does not comply with the SMTP protocol. If you are using secure connections, your remote mailbox service also has to support secure connections. There may also be a transient problem with the remote mailbox service, or the Internet servers between the communicator and the remote mailbox. Try again after a couple of minutes, and then contact your Internet Service Provider.
Troubleshooting 302 11. Cannot establish an Internet connection If you are trying to connect to the Internet (in order to use WWW or to receive or send mail), but the operation does not succeed, you can use the following checklist to find out where the problem might be located: 1 Is the data call active when you are trying to connect? Look at the data call indicator on the phone side.
Internet connections between the WWW server and your Internet Service Provider. Check the proxy server settings explained on page 177. Disconnect the call, wait for a couple of minutes, and retry the connection. If the connection still does not succeed, contact your Internet Service Provider.
Troubleshooting 304 The PC to which you want to establish the connection must have an IrDA compatible infrared port; installed and activated IrDA drivers; and Microsoft Windows 95/98/98SE/Me. For more information on IrDA drivers and their use in Windows, contact Microsoft. If you have an IBM Thinkpad laptop with Windows 98 SE installed, you may encounter problems with infrared connections. If problems occur, proceed as follows: 1 2 3 4 Click the Windows Start button and select Settings > Control Panel.
If you fail to establish an infrared connection, transfer the file to a PC and use the PC to print the document. Alternatively, you can fax the document to the nearest fax machine. See ‘Write and send a new fax’ on page 207. 14. PC connectivity problems Make sure that PC Suite for Nokia 9290 Communicator is installed and running on your PC. See the PC Suite Guide for more information. If you use a cable connection, check that the cable is properly attached at both ends.
Troubleshooting 306 If you have problems establishing a data connection with the remote modem, try fixing the data transmission rate by using an AT command. Common AT commands based on the GSM 07.07 standard and supported by the Nokia 9290 Communicator are listed in the atcomm.txt file on the CD-ROM supplied with the communicator. You can find this file by clicking ‘AT commands” in ‘PC software section’ on the CDROM.
• You have tried to download a large WWW page. See see item 19 on this troubleshooting list. You can check the memory usage in the Memory application of Control panel. See ‘Memory’ on page 269. 18. Cannot connect to the Internet when roaming You are able to connect to the Internet when in your home country or region. You are now roaming and your Internet connection does not work. Try using the settings of a basic GSM data connection.
Troubleshooting 308 You may have removed or replaced the memory card that was originally inserted in your communicator. If you have removed the card, re-insert it. If you have replaced it, use PC Suite for Nokia 9290 Communicator to install memory card applications from the Preinstalled in Memory Card folder of the sales package CD-ROM to the new memory card. You can also find the installation packages for the other preinstalled applications in the Preinstalled in device folder of the sales package CD-ROM.
15. Reference information Important safety information Traffic safety af t Do not use a communicator while driving a vehicle. If using a communicator, park the vehicle first. Always secure the communicator in its holder; do not place the communicator on the passenger seat or where it can break loose in a collision or sudden stop. Dr The use of an alert device to operate a vehicle's lights or horn on public roads is not permitted.
Reference information 310 As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Do not point the infrared beam at anyone’s eye or allow it to interfere with other infrared devices.
If you have any reason to suspect that interference is taking place, switch off the phone of your communicator immediately. Hearing aids: Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider. Other medical devices: Operation of any radio transmitting equipment, Dr af t including communicators, may interfere with the functionality of inadequately protected medical devices.
Reference information 312 Potentially Explosive Atmospheres Switch off the phone of your communicator when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the phone when at a refueling point (service station).
For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Switch off the phone of your communicator before boarding an aircraft.
Reference information 314 2 If the phone is not on, switch it on by pressing the key. Some systems may require that a valid SIM card is properly inserted in the communicator. 3 Press and hold the key for several seconds to ready the phone for calls, and to end possible active data or fax calls. 4 Key in the for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location. 5 Press the key.
availability of approved accessories, please check with your dealer.When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord. Certification Information (SAR) THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Dr af t Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
Reference information 316 Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.
depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at www.nokia.com. Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Dr af t Tens of millions of people in the u.s. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
Reference information 318 2 When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. 3 Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road.
Dr af t Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones.
Reference information 320 Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user.
3. What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’s head.
Reference information 322 5. What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists.
af t 8. What has FDA done to measure the radiofrequency energy coming from wireless phones? Dr The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers.
Reference information 324 If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful.
12.Where can I find additional information? For updates: http://www.fda.gov/cdrh/phones Dr July 18, 2001 af t For additional information, please refer to the following resources: • FDA web page on wireless phones http://www.fda.gov/cdrh/phones/index.html • Federal Communications Commission (FCC) RF Safety Program http://www.fcc.gov/oet/rfsafety • International Commission on Non-Ionizing Radiation Protection http://www.icnirp.de • World Health Organization (WHO) International EMF Project http://www.who.
Reference information 326 Do not store it in cold areas. When the communicator warms up (to its normal temperature), moisture can form inside the communicator, which may damage electronic circuit boards. Do not attempt to open it. Non-expert handling of the device may damage it. Do not drop, knock or shake it. Rough handling can break internal circuit boards. Dropping the product may break the color display, which is fragile. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.
are operating properly. • Installation of any complex car accessories must be made by qualified personnel only. • Use only batteries, chargers, and accessories that have been approved by the phone manufacturer. The use of any other types could invalidate any approval or warranty applying to the phone and could be dangerous. Battery safety Charging and Discharging af t Your phone is powered by a rechargeable battery.
Reference information 328 Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries' performance is particularly limited in temperatures well below freezing.
Fax type NOKIA One Year Limited Warranty for US af t Note: This warranty is applicable to US residents ONLY. Dr Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions: 1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product.
330 Reference information for their intended use with new or refurbished replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts.
acts which are not the fault of Nokia, including damage caused by shipping.
Reference information 332 for other good cause, the Consumer shall ship the Product prepaid and insured to: Nokia Inc., Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL 32901 c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty.
conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned after the expiration of the limited warranty period, Nokia’s normal service policies shall apply and the Consumer will be responsible for all shipping charges.
Reference information 334 BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED. 11 Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer).
Attn: Customer Service 7725 Woodland Center Blvd., Ste. 150 Tampa, FL 33614 Telephone: 1-888-NOKIA-2U (1-888-665-4228) Facsimile: (813) 287-6612 TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6452) 17 The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging. *Nokia is a registered trademark of Nokia Corporation.
Reference information 336 During the warranty period, Nokia will, at its option, repair or replace the defective product free of charge. Replacement Product may be either new or remanufactured or refurbished. However, if Nokia determines that the warranty conditions cannot be applied, the purchaser will be billed for the repair and shipping. EXCEPTIONS This warranty is subject to the following exceptions: 1.
6. Removal and reinstallation costs are not covered by this warranty; 7. This warranty is applicable only to products bought through Nokia Products Ltd. in Ajax, Ontario, Canada, and sold either in Canada or Bermuda. 8. Removal, alteration, or defacing of the Serial Number Plate, or the accessory Date Code Labels will void the warranty.
Reference information 338 Besides this 90-day service warranty, the warranty repairs or replacements do not affect the original warranty conditions, which are determined by the date of purchase. THE FOREGOING WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE.
16. Glossary AT Commands Operations of a fax modem can be controlled by AT commands. These commands give the advanced user an opportunity to control all the features of the modem. A list of common AT commands based on the ETSI 07.07 standard and supported by the Nokia 9290 Communicator is available on the CD-ROM included in the sales package of your communicator. Cookies Cookies are little pieces of information, given by the server to you, to store information about your visits to a Web site.
Glossary 340 and the following parts are names of domains to which the host belongs. Each host name corresponds to a certain IP address. Host names are used because they are easier to remember than IP addresses. Gateway IP address The address of a WAP gateway. (see: WAP gateway). Hotspot A World Wide Web (WWW) page may contain hotspots, such as selection lists, text entry fields, and reset/submit buttons, which enable you to input information into the WWW.
Hyperlink A link on a WWW page that leads to another World Wide Web page or site, or another place on the same page. Hyperlinks are usually underlined or shown in a different color from the surrounding text. Hyperlinks can also be pictures. IAP (Internet Access Point) The point where your communicator connects to the Internet by way of a data call. An Internet access point can be provided, for example, by a commercial Internet service provider (ISP) or by your own company.
Glossary 342 Java An object-oriented, general purpose programming language developed by Sun Microsystems and originally designed for handheld devices. Java is language similar to C++, but simplified to eliminate language features that cause common programming errors.Compiled Java code can run on most computers because Java interpreters and runtime environments exist for most operating systems Lock code The lock code is a five-digit code needed to lock and unlock the communicator.
PIN2 Code The PIN2 code is supplied with some SIM cards. The PIN2 code is required to access certain functions supported by the SIM card. The length of the PIN2 code is 4 to 8 digits. Plug-in A plug-in is add-on software that can be downloaded from the WWW. The communicator uses plug-ins to display a document that the WWW application itself cannot show POP3 (Post Office Protocol, version 3) A common mail protocol that can be used for accessing the Remote mailbox.
Glossary 344 The PUK is an 8-digit code supplied with the SIM card. The code is required when you want to change a disabled PIN code. If you enter an incorrect PUK code ten times in succession, the SIM card is rejected and you cannot make or receive any calls, except emergency calls. When the SIM is rejected, you will need a new SIM card. You cannot change the PUK code. If you lose the code, contact your system service provider. PUK2 Code The PUK2 code is supplied with some SIM cards.
A security protocol that prevents eavesdropping, tampering, or message forgery over the Internet. Documents using SSL are identified with the prefix HTTPS. SIM (Subscriber Identity Module) card The SIM card contains all the information the cellular network needs to identify the network user. The SIM card also contains security-related information. Simple Mail Transport Protocol (SMTP) An Internet protocol governing the transfer of electronic mail.
346 Glossary The system used by touch-tone telephones. Touch tones assign a specific frequency, or tone, to each key so that it can easily be identified by a microprocessor. Touch tones allow you to communicate with voice mailboxes, computerized telephony systems, etc. Transport Layer Security A security protocol similar to SSL offering end-to-end encrypted and authenticated connections. The server to which the connection is established is authenticated by the use of certificates.
An extension to an Internet access point (see: IAP), which provides additional information that the WAP browser needs in order to be able to connect to a WAP service.
Glossary 348
349 Index A About Guides 50 The user guide 51 Access codes, See Security of phone Accessories 260 Car kit 260 Headset 260 Applications Creating shortcuts to 63 Disappearing 296, 307 Installing 264 Removing 264 Arrows key 66 AT commands 339 Attachments to Calendar entries 160 Mails 223 B Background image 108 Backups To memory card 251 Barring password Changing 259
350 Barring status 259 Battery Charging 67 Precautions 69 Business card Own 137 Receiving 148 Sending 147 Buttons Application 62 C Cache 190 Calculator General operation 255 Calendar Anniversaries view 166 Attachments 160 Changing entry types 158 Creating new entries 154 Creating task lists 167 Day view 163 Defining entry information 154 Deleting entries 159 Deleting task lists 168 Editing entries 158 Editing task lists 167 Entries 153
351 General commands 161 General settings 169 Month view 161 Searching entries 168 Sending entries 154 Settings 169 Symbols 166 Task lists 167 Task lists view 163 View settings 170 Views 160 Week view 162 Weekly time schedule view 164 Year schedule view 165 Callback 179 Calls Advanced settings 129 Answering 89, 113 Barring 103, 126 Charging 129 Conference 116 Diverting 105 , 125 Lock code 104 Making 86, 112 Managing conference calls 117 Multiple 115 Options during calls 89 PIN code 104
352 PIN2 code 104 Poor call quality 299 Private 117 Recent calls 113 Recording 115 Register 96 Settings 100, 119, 128 Switching between calls 115 Transferring 118 Troubleshooting 298, 299 Using phone book 112 Waiting 118 CBS Creating topic lists 276 Detecting new topics 277 Opening topic lists 277 Overview 275 CD-ROM Installing software from communicator’s CD-ROM 81 Cell Broadcast Service, See CBS viewer Cell broadcast viewer 275 Cell Broadcast viewer, See CBS viewer Certificate management 262 Character key
353 Editing 243 Replacing data 244 Cities 254 Clock 253 Alarms 254 Changing your home city 254 Codes Autolock period 257 Overview PIN code 103 PUK code 343 Security options 256 Troubleshooting 306 Communicator Cleaning 326 Facts 51, 269 Interface 57 Overview 48 Restarting 297 Connectors 66 Contact card Adding fields 139 Attaching pictures 141 Attaching ringing tones 140 Changing fields 139 Changing group memberships 144 Creating 136 Creating SIM contact card 145
354 Field information 139 Opening 138 Receiving 148 Renaming fields 139 Searching 138 Sending 147 Sending via SMS 150 Settings 148 SIM directory options 146 Storing DTMF tones 142 Templates 141 Troubleshooting 299 VIP Group settings 150 Contact database 150 Contact group 143 Contact information Overview 53 Contacts Cannot select a card 299 Search details 138 Contacts main view 135 Control key 65 Control Panel 256 Currency 269 D Data call barring 259 Date format 269
355 Desk Adding links 108 Changing background image 108 Main view 107 Writing notes 108 Desk, application 107 Dialogs 59 Digital certificates 262 Disappeared applications 296, 307 Display Elements 57 Indicators 59, 85 Settings 261 Troubleshooting 296 Documents Creating 232 Inserting objects 234 Outline 235 Pagination 235 Sending 76 Templates 234 Text markers 235 Text style 232 DTMF tones Sending 88, 119 Storing in a contact card 142
356 E Emergency calls 133, 313 Enter key 66 Escape key 64 F Fax Access requirements 199 Polling 211 Receiving and reading 202, 209, 211 Sending 203, 205, 208 Settings 211 Troubleshooting 300 Writing 205, 208 Fax modem 278 Activating 281 Disabling 281 Settings 280 Troubleshooting 305 Fetching Faxes 211 Mail 220 File manager Creating folders 249 Files view 247 Folder view 246 Moving files and folders 249 Overview 246
357 Renaming files and folders 250 Searching files and folders 250 Viewing folders 247 Viewing properties 250 Files .
358 Viewing 272 Images Albums 271 Creating new 273 Moving 273 Receiving via infrared 274 Resizing 274 Imaging 271 Inbox 202 Indicators on display 59 Infrared Activating 106 Settings 82 Troubleshooting 303 International calls 87 Internet Callback settings 179 Connection scripts 181 Creating or modifying connections 175 Data call settings 178 Establishing a connection 183 Internet access point 173 PPP compression 180 Proxy settings 177 Setting up connections 173 Settings 176 Troubleshooting 302, 307 Invalid S
359 J Java 197 K Keyboard Keys 62 Keyboard shortcuts 63 Keypad Keys 84 Locking 90 Unlocking 91 Keys On phone keypad 84 L Lock code 53, 86, 104, 257, 306, 342 Changing 258 lock code 258 Log 79 M Mail Access requirements 199, 212 Adding attachments 223 Advanced settings 215 Attachments 223 Deleting 220, 221 Editing accounts 216 General settings 213
360 Reading 202, 221 Receiving (fetching) 220 Replying to 222 Sending 203, 205, 217, 219 Server settings 214 Settings 213 Signature 215 Synchronisation 225 Troubleshooting 300 Viewing and saving attachments 223 Writing 205, 217 Measurement unit 269 Memory Card 71 Details 269 Troubleshooting 306, 307 Memory card Backups 251 Inserting 71 Restoring from 251 Menu key 65 Menus In phone 92, 93 Scrolling 92 Shortcuts 93 Message box cleanup 207 Messages Opening 200
361 Messaging Application 199 Centre 200 Deleting messages 207 freeing up memory 207 Inbox 200, 202 Opening folders and messages 200 Outbox 200, 203 Selecting recipients 205 Sorting 201 Messaging centre 200 Multiselection 72 N Network services General information 51 Settings 124 Notes 108 Number format 269 O Office, application 231 Offline 224 Online 224 Outbox 203 P Pages 59 PC Connectivity
362 Troubleshooting 305 PC mail Converting to 226 Creating 225 Phone Answering 113 Book 112 Call divert menu 105 Call register menu 96 Infrared menu 106 Messages menu 94 Recent calls 113 Scrolling menus 92 Settings 101, 119 Settings menu 100 SIM services menu 106 Phone numbers Searching for 87, 112 Phone security 256 Phone, See also Calls Picture Attaching to a contact card 141 PIN code Changing 258 PIN2 code Changing 258 Pointer 187 Preferred application 63
363 Presentation viewer 244 Presentations Outline 245 Searching slides 245 Viewing 245 Viewing slides 245 Printing 78 Prints Troubleshooting 304 Profiles 91, 120 Creating new 121 Properties of Files, folders and drives 250 R Recorder 270 Regional settings 269 Remote Faxbox 211 Mailbox 200, 212, 224 Remote mailbox 220 Subscribing to 220 Restoring From memory card 251 Ringing tone Attaching to a contact card 140 Playing 140
364 S Safety information Care and Maintenance 325 Electronic devices 310 Emergency calls 313 Operating environment 309 Potentially explosive atmospheres 312 Short summaries 13 Traffic safety 309 Vehicles 312 Screen Settings 261 Security .
365 Shortcuts to applications 63 SMS Access requirements 199 Receiving and reading 202, 228 Settings 229 Troubleshooting 300 Writing and sending 203, 205, 227 Software Installing 264 Removing 264 Speed dials 88, 123 Spell checking 77 Spreadsheet Aligning 240 Background colour 241 Borders 241 Clearing cells 239 Column width 240 Deleting 242 Entering data 237 Fonts 241 Inserting cells 239 Naming cells 242 Naming worksheets 242 Number format 241 Page breaks 241 Row height 240 Selecting cells 238
366 Viewing 242 Spreadsheet application Chartsheets 243 Overview 236 Workbooks 236 Worksheets 236 T Tabulator (Tab) key 64 Telephone Application 111 Settings 119 Telephone, See also Calls Text Searching for text 76 Time format 269 Troubleshooting 296 Blank display 296 Cannot divert or bar 299 Cannot make calls 298 Cannot select a contact 299 Cannot send or receive 300 Deleting temporary files 298 Disappeared applications 307 Downloading large pages 307 Fax modem 305 flashing display 296 Formatting memory 2
367 Infrared 303 Internet connections 302 Internet when roaming 307 Invalid SIM card 299 Lock codes 306 Low memory 306, 307 Message too long 301 No response 297 Not charging 296 PC connectivity 305 Phone does not work 297 Poor call quality 299 Printing 304 Restarting 297 V Video Playing 275 Video player 274 Viewing Images 271 Voice mailbox Calling 114 Creating 114 Settings 127 W WAP
368 Access requirements 192 Bookmarks 195 Differences from WWW 192 Navigating 196 Setting up connections 193 Settings 196 Web pages changing frame sizes 187 scrolling 187 Wireless data transmission Limitations 53 Word Processor, application 231 World Wide Web Bookmarks 191 Browser application 183 changing frame sizes 187 Cookies 190 Differences from WAP 192 Emptying cache 190 Emptying history 190 Frame options 189 Loading images 188 Navigating 185 Pointer 187 Scrolling 187 Settings 188
