User's Guide

Remote configuration (network service)
The Device manager application helps you configure connection settings, for example, e-mail, multimedia messaging, or
Internet settings.
Go to Desk → Tools → Device manager.
The remote configuration connection is usually started by the server when device settings need to be updated.
• To start a configuration session, select a profile from the list, and press Connect. If no remote configuration profiles have
been defined, you must first create a new profile.
• To disable configuration, select a profile, press Menu, and select Tools → Disable configuration. You cannot receive
configuration settings from any of the configuration servers for which you have a profile.
When the configuration session has ended, you can view status information.
• To open the configuration log, select a profile, and press Configuration log. The log file shows the latest configuration
status of the selected profile.
Creating a new configuration server profile
The configuration server profile contains the settings for the remote server. You can create several profiles if you need to
access multiple servers.
You may receive the configuration server profile settings as a special message from your service provider.
1. If you have no profiles defined, press New, otherwise press Menu, and select File → New.
2. If you already have profiles defined, choose whether you want to copy the values from an existing profile to be used as
the basis for the new profile.
3. The Profile settings dialog opens.
Define the following settings on the different pages of the dialog:
• Server name—Type a name for the configuration server.
• Server ID—Type the unique ID to identify the configuration server. Contact your service provider or system
administrator for the correct value.
• Password—Write a password to identify your device to the server. Confirm the password.
• Active—Select Yes to allow the server to initiate a configuration session.
• Accepted—Select Yes if you do not want the server to ask for your confirmation when it initiates a configuration
session.
• Connection type—Select how you want to connect to the server.
• Access point—Select the access point you want to use for the data connection to the server.
• Host address—Type the URL address of the server. Contact your service provider or system administrator for the
correct value.
• Port—Type the port number of the server. Contact your service provider or system administrator for the correct value.
• User name—Enter your user ID for the configuration server. Contact your service provider or system administrator for
your correct user ID.
• Password—Type your password for the configuration server. Confirm it in the Confirm password field. Contact your
service provider or system administrator for the correct password.
• To edit the configuration profile settings, select the profile, and press Edit.
• To delete a profile, select the profile, and press the backspace key.
Tip: If you have deleted or modified the predefined PC Suite profile, you can restore it by pressing Menu, and
selecting Tools → Reset PC Suite profile.
Connectivity
Copyright © 2004 Nokia. All Rights Reserved. 87