User's Guide

Table Of Contents

Volume control

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be

extremely loud.

• To adjust the volume level during a call, press the scroll key left or right.

• To adjust the volume level when using the loudspeaker, open Telephone, and press the scroll key left or right.

Nokia PC Suite

Nokia PC Suite offers you a set of programs for managing your Nokia 9500 Communicator. For example, you can synchronize

your contacts and calendar information, e-mail, and to-do items between the device and a compatible PC using Nokia PC

Sync, manage device folders using Nokia Phone Browser, back up and restore personal data using Nokia Content Copier, and

install applications using Nokia Application Installer.

For additional instructions on how to install and use the PC Suite, see the User's Guide for Nokia PC Suite on CD-ROM, or helps

in the Nokia PC Suite applications.

To use Nokia PC Suite, you need to connect your device to a compatible PC using the DKU-2 (USB) cable, Bluetooth, or

infrared.

See Connectivity on page 84.

Install Nokia PC Suite from CD-ROM or from www.nokia.com. Note that Nokia PC Suite can only be used with Windows 2000

and Windows XP.

• If you want to use cable, connect the cable to a compatible PC, and then to the device.

• If you want to use Bluetooth, pair the device and a compatible PC, and set the PC as authorized.

See Pairing with a device

on page 86.

• If you want to use infrared, activate infrared on your device.

See Infrared on page 86. Activate infrared on the compatible

PC, if necessary.

You need to install DKU-2 (USB) drivers for cable connection, and you may need to install or update Bluetooth or infrared

drivers if you want to use the device as a modem. See the sales package CD-ROM,www.nokia.com and the User's Guide for

Nokia PC Suite for details.

Data mover

You can use Data mover to transfer certain data, such as contacts and settings, from your Nokia 9200 series Communicator to

your Nokia 9500 Communicator with infrared or a memory card. Before you start, make sure that there is enough free

memory in your communicators or memory card for the transfer. Note that if there is less than 2 MB of free memory in the

Nokia 9500 Communicator, you cannot start the transfer.

Do not use the Nokia 9500 Communicator when using Data mover. If possible, switch off the cover phone. Make sure you

have enough battery power, or connect the device to a charger..

Note that there may be additional steps, depending on the type of information that you want to transfer, the method of

transfer you want to use, the amount of free memory on your previous communicator or memory card, or the number of

successful or unsuccessful transfers you have made previously.

1. Go to Desk → Data mover. If there is data on a memory card, insert it to your Nokia 9200 series Communicator. Press

Continue.

2. Activate infrared in both devices, and press Connect. An infrared connection is established between the devices.

3. Press Send data collector to send the data collector tool to your Nokia 9200 series Communicator. The tool starts

automatically after installation. If you have already installed the tool , press Connect data collector.

Your communicator