User Manual

Using RecordData application

4. When the phone asks you for a confirmation, press Yes.

Information about the shortcut and all related log data is deleted.

5. Using RecordData application

■ Recording data

Touching a tag with the RFID reader records time stamped information

for the tag in the RecordData application.

Note: When touching a new tag, you must also define

information about the tag in the RecordData application.

To record data:

1. Touch the tag with the RFID reader.

2. Optional: If the tag is not defined in the RecordData application yet,

specify a name and record type for the tag.

1. Specify a name for the tag in the Name field. Press Edit, enter the

name and press OK.

2. Under Record type, select the record type for the tag and press

Select.

The record type defines what kind of information the application

asks you to enter when you read the tag.

• None - When you read a tag, the application does not ask you

for any input, it only records the time you touched the tag.

• Text - When you read a tag, the application asks you to enter

input which can be text and/or numbers.

• Number - When you read a tag, the application asks you to

enter input as numbers.

3. Depending on the record type you selected, do one of the following:

• If you selected record type None, select Save and press OK. The

tag information and the recorded data are stored in the

application and step 4 is skipped.

Mobile_RFID_kit.book Page 14 Friday, May 14, 2004 6:02 PM