User manual

You can define simple codes, codes in Shift state, key combinations

strings built from that like e.g.:

{Ctrl+F5}

{Shift+F8}

{Alt+F1}

{Alt+#123}

{Ctrl+f}{Alt+#240}

For a number of codes symbolic names are available, like F1, .., F12,

Shift, Ctrl, Alt, AltGr, Enter, Return, Left, PgUp etc.

Specification of codes not only may be done in symbolic form like above,

but also as hexadecimal 8042 scan codes. This, however, is only in a few

cases required and will make sense!

Specifying hexadecimal scan codes should be avoided at

all, unless there are good reasons! A fairly good knowledge

of their structure and all their details is required!

Before programming the following is to be defined:

Target keyboard TA58P (can not be changed later)

Keyboard language, e.g. US for USA, GR for Germany etc.

Programmable Keyboard TA58P

GB - 22