User manual

Cleaning Instructions
In order to ensure that the quality of reading results is maintained, clean
the swipecard reader at least once a week. To do this, use the special
cleaning card that can be ordered from Wincor Nixdorf.
Connection method
Connection method
The connector for the keyboard is
a standard 6-pin mini-DIN connector.
The cable can be ordered optionally
as a
- 0.8 m cable,
- 1.5 m cable or
- 3.0 m cable.
Releasing the Cable Connection
Releasing the Cable Connection
Never remove a cable from a connector socket by simply pulling on the
cable. Always remove the cable by the connector housing. Please follow
the instructions below when removing cables:
Turn off all switches to the mains and electrical equipment.
Remove all mains cables from the shockproof sockets installed in the
building.
Loosen all cables on the electrical equipment.
Connection method
GB - 11