User manual

Keypad

In the functional keyfield of the TA58P, two keys can be combined to form

a double key and four keys to form a quadruple key, either horizontally or

vertically. Only one key code is generated by each double or quadruple

key.

Key caps can be changed on the spot using the key cap remover included

in the scope of supply. When using the key caps for multiple keys, note

the position of the pin on the underside, making sure that the desired code

is set. According to the Wincor Nixdorf Convention the guide cylinder is po-

sitioned left (double key horizontal), on the bottom (double key vertical) or

on the bottom left (quadruple key).

Key switch

The TA58P keyboard is equipped with a key switch with 6 switch positi-

ons. Switch position 0 is the basic position; switch positions 1-4 are provi-

ded for customer-specific applications. In positions 0 and 1, the key can

be removed.

The sixth switch position, which is

designated on the lock by T, is

intended for use by Field Enginee-

ring. From switch position 0, the key

provided can be turned to position T

only. This key is not included in the

scope of supply.

The key switch has only one

closure, i.e. there is only one set of

keys for all keylocks that includes the

above-mentioned key variants for the

various switch positions.

MGR

REG

Keypad

GB - 8