Nokia 500 Auto Navigation User Guide 9206144 Issue 1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this PD-17 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/ 5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/EEC), Annex I, paragraph 6.5, 6.6, 6.8 and 6.9. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
Contents For your safety ........... 6 Copy files to the card..................... 19 1.Introduction............. 7 3.Basic operation ...... 21 Bluetooth wireless technology........... 7 Global Positioning System (GPS)....... 7 DVD ............................................................ 8 2.Get started............. 10 Keys and parts...................................... 10 Front, right, and top view ............. 10 Back, left, and base view............... 11 Chargers................................
Call a saved contact........................ Call register........................................ Voice dialling..................................... Speed dialling (Favourites) ............ Answer or reject a call ....................... Call waiting........................................ In-call options ...................................... Adjust phone settings ........................ Phone connections .......................... Bluetooth............................................ Contacts download.
Contents 6
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.
Introduction 1. Introduction You can use the Nokia 500 Auto Navigation device for GPS navigation in a car and outdoors. You can also make calls, view photos, watch videos, and listen to music. Read this user guide carefully before using the device. Also read the user guide for your mobile phone. It provides important safety and maintenance information. Check www.nokia.
Introduction The GPS antenna is located at the top of the navigation device. Some car windscreens and windows may contain metal, that may block or weaken the satellite signals. If you stand still, GPS cannot detect which way you are facing because it determines your direction on the basis of your movement. Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely on the cartography provided for use with the GPS application.
Introduction DVD into the compatible DVD drive on your PC. The setup wizard starts automatically (if allowed in the settings of the DVD drive) and guides you through the setup. If you want to change the contents of the memory card, select all the maps, POI databases, and languages that you want to add to the card. When the wizard copies these files to the memory card, the old files of the same type are deleted from the card.
Get started 2. Get started ■ Keys and parts Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Front, right, and top view 1 2 3 4 9 5 10 6 7 8 1. Cover of connector for an optional external GPS antenna 2. Power key 3. Cover of stereo audio-out connector 4. Indicator light 5. Touch screen 6. Volume down key 7. Menu key 8. Volume up key 9.
Get started Back, left, and base view 1 5 2 3 4 1. Loudspeaker 2. Main power switch 3. Mini USB port/charger connector 4. Reset key 5. Microphone ■ Chargers This device is intended for use when supplied with power from the DC-1001 charger. Warning: Use only chargers approved by Nokia for use with this particular device. The use of any other types may invalidate any approval or warranty, and may be dangerous. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
Get started 1. Connect the charger to the mini USB port on the navigation device, and insert the charger plug into the cigarette lighter socket of your car. Power must be supplied by the 12 V car battery. Ensure that the charger is properly inserted in the cigarette lighter socket and does not interfere with the normal operation of the car. In some car models, the cigarette lighter socket is powered by the car battery even when you remove the ignition key.
Get started The Navigator application starts and the map view is displayed. Now you can start to use the device. Next, set the time and date. See “Adjust device settings,” p. 23. To pair and connect the navigation device with a compatible mobile phone using Bluetooth wireless technology, see steps 2 to 5 in “Set up Bluetooth connection,” p. 15. When you are asked to download the contacts from your phone to the navigation device, tap Yes to start the download.
Get started Bluetooth connection at startup When you switch on the device or exit the standby mode, you are asked whether you want to connect the device to the previous mobile phone. To connect to the previous phone, tap its name. The map screen is displayed. To connect to some other device, tap Other. The Phone connections screen is displayed. Tap the desired device and Connect. To download the contacts saved in the other device, tap Yes.
Get started If the navigation device was connected to your phone, the Bluetooth name of the device is displayed. You can define the Bluetooth name in your phone. The navigation device is shown in the menu of your phone where you can view the currently paired Bluetooth devices. You can pair the navigation device with up to eight mobile phones but connect it to only one phone at a time.
Get started To turn off Bluetooth connectivity when a device is connected to the navigation device, press the menu key, and tap Phone > > > Yes. To turn on Bluetooth connectivity, press the menu key, and tap Phone > > > Yes. ■ Install the device in a car To install the navigation device in a car, attach the HH-12 mounting device to the CR-91 mobile holder, attach the mounting holder to the windscreen, and place the navigation device into the mobile holder.
Get started storage temperature falls below -40°C (-40°F) or exceeds + 100°C (212°F). 2 3 5 4 1 6 Attach mobile holder to mounting device Attach the mobile holder to the mounting device using the supplied screw (1), and snap the supplied protection plate with the "Nokia" text over the screw. Attach mounting device to windscreen Locate a safe mounting surface on the windscreen, and clean the surface thoroughly with a glass cleaner and a clean towel.
Get started the cup and the windscreen (2). Check that the suction cup is firmly attached. If you want to detach the mounting device from the windscreen, carefully push the locking lever toward the top of the mounting device, and pull the strap located on the edge of the suction cup. Place navigation device into holder To place the navigation device into the mobile holder, insert the catches at the bottom of the holder into the recesses at the bottom of the device (3).
Get started Use only compatible SD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Insert the card Slide the memory card into the adapter in the direction marked on the card so that the label sides of the card and adapter point up.
Get started Plug one end of the supplied DKE-2 USB data cable to the mini USB port on the device and the other end to a compatible USB port on the PC. The operating system detects the navigation device as a mass storage device, and Mass storage mode is displayed on the navigation device. Copy the files from the PC to the navigation device as instructed in the documentation of the operating system.
Basic operation 3. Basic operation ■ Touch screen To use most features of the device, tap the screen with your finger. Important: Avoid scratching the touch screen. Never use a pen or pencil or other sharp objects to write on the touch screen. ■ Open applications from map screen When you switch on the device, the map screen is displayed. This screen shows the map view of the Navigator application. The device includes the following applications: • Navigator ( ) for GPS navigation (see p.
Basic operation The battery charge is low. If this indicator is blue, Bluetooth connectivity is turned on but the navigation device is not connected to a compatible device. If this indicator is grey, Bluetooth connectivity is turned off. The navigation device is connected to a compatible device. ■ Adjust the volume To adjust the volume for the current application, press (or press and hold) the volume up (+) or down (-) key.
Basic operation • To set the time after which the backlight turns off if the device is not used, in Energy saver (battery), tap + or -. If you select Never, the backlight does not automatically turn off. Time and date To define the time and date settings, tap Time & date. Tap scroll through the settings. or to • To set the time, tap the time in Time. Tap the hour, minute, or second field at the top of the displayed keypad. To enter the time, tap the digits, or tap + or -, and tap to save the setting.
Basic operation FM transmitter The device has an FM transmitter that you can use to listen to music from the Music application through your FM car radio system. The FM transmitter can also be used for phone calls. To use the FM transmitter with Music, see p. 43. To define the settings for the FM transmitter, tap FM transmitter. You can access the settings also in the Music application by tapping .
Navigator 4. Navigator The navigation device has an internal GPS receiver that you can use to detect your current position and for turn-by-turn navigation. When you switch on the device, the map view of the Navigator application is displayed. To use navigation, press the menu key, and tap Navigator. Alternatively, tap . The device receives signals from a number of GPS satellites to determine your current position.
Navigator Tracking mode In the tracking mode, the map follows your GPS position and displays the following information: 1. Current speed 2. Time 3. Elevation above mean sea level 4. Geographic coordinates 5. Number of GPS satellites to which the device is connected 6. Compass rose 7. Name of the current position 8. Current GPS position 9. Zoom out 10.Zoom in To browse the map, tap the map to go to the browsing mode.
Navigator Browsing mode In the browsing mode, the bottom of the screen is orange, and north is on the top. The map displays the following information: 1. Compass rose 2. Name of the current position 3. Current GPS position 4. Cursor 5. Zoom out 6. Zoom in To select a location on the map, zoom the map in or out if necessary, and move the map with your finger until the cursor points to the desired location. Tap and the desired option.
Navigator ■ Navigate to a destination To navigate to a destination, press the menu key, and tap Navigator > Destination and one of the following: • Address — you can enter the address of the destination. See “Navigate to an address,” p. 31. • Recent — you can navigate to a recently visited location. See “Recent locations,” p. 33. • Favourites — you can navigate to a location that you have saved as a favourite. See “Favourites,” p. 32.
Navigator Navigation screen After the device has calculated the route to the destination, the navigation screen is displayed: 1. Next street 2. Route 3. Next turn and distance to it 4. Current speed 5. Estimated time of arrival to the destination 6. Distance to the destination 7. Average speed (if this function is set to on) 8. Compass rose 9. Current street 10.Current position and direction 11.Zoom out 12.Zoom in When you come to a turn or other manoeuvre, you hear a related voice instruction.
Navigator For one-way streets, the allowed direction is indicated with a blue arrow. To browse the map, tap it. To stop the navigation, tap . Functions available in navigation screen To use the functions available during navigation, tap the following: . You can do • To block the calculated route for the desired distance and force an alternative route, tap Alt. route. • To view the manoeuvres along your route as a waypoint list, tap Waylist. • To save your current position as a bookmark, tap Save.
Navigator When you use the keypad, you can only tap the keys that lead to a search result; other keys are inactive. To delete the last character, tap Clr. You can enter characters until you have narrowed down the search to only one result, or you can tap and the desired address on the list. To scroll through the list, tap the up or down arrow. To narrow down the search, tap . When you have found the address, tap in the Find address screen, and tap the desired option.
Navigator To edit an address, tap the address and Edit. To use other available options, tap the address and the desired option. You can navigate to the address, add it to a route (Via), view it on the map, delete it, or delete all the addresses. Bookmarks To manage the destinations that you have saved as bookmarks, in Favourites, tap Bookmarks. Tap a destination on the bookmark list and the desired option.
Navigator To navigate to a location, add it to a route (Via), tap the location and the desired option. ■ Plan a route You can plan your route in advance, also without GPS connection. To plan a route, press the menu key, and tap Navigator > Destination. Select the start point for the route in the same way as a destination, and add it to the route (Via). When you tap Via, Destination list is displayed. To add a waypoint to the route, tap +, and select the location in the same way as a destination.
Navigator ■ Traffic information (TMC) To view a list of traffic incidents along your route during navigation or in the tracking mode, tap > Traffic info.. The list is sorted by the distance to your current position. The list is based on TMC (Traffic Message Channel) messages that you may receive through the internal TMC receiver from the local TMC operator. The availability and accuracy of traffic information depends on the provider of the TMC service.
Navigator not suggest an alternate route. See also “Traffic information (TMC),” p. 35. To select a male or female voice for navigation instructions, tap VoiceSkin and the desired voice. (To select the language, see “Language,” p. 23.) In some languages, you can select a text-to-speech skin (indicated with "TTS") that allows you to hear street names, house numbers, names of motorway exits, and city names during navigation. When you select a text-to-speech skin, voice instructions are longer.
Navigator • Slow — assumes slower driving. • Bike — takes into account bike paths and restricts highways where bikes are prohibited. There are no voice instructions. • Van — takes into account van restrictions. • Motorbike — takes into account motorbike restrictions. • Pedestrian — takes into account pedestrian routing, including access to one-way streets and pedestrian zones. There are no voice instructions. • Scooter — takes into account scooter restrictions.
Call handling 5. Call handling If you answer a call when you use the Navigator application, the spoken navigation instructions are muted until you end the call. To view the map and minimise the in-call options screen, press the menu key. is displayed in the top right corner of the screen. To open the in-call options screen, tap . If you answer a call when you use the Music application, the current song is paused until you end the call. If the FM transmitter is turned on, it is also used for call audio.
Call handling Call a saved contact To call a contact that you have downloaded from your mobile phone, press the menu key, and tap Phone > Contacts. Tap the first few letters of the desired name using the displayed keypad. (To delete the last character, tap Clr.) The first matching names are shown at the top. To view all the matching names, tap or the list. If the list is long, tap or , or tap to enter more letters. To view the phone numbers saved with a name, tap the name. To call a phone number, tap it.
Call handling Speed dialling (Favourites) To speed dial a phone number, press the menu key, and tap Phone > Favourites when you are not in a call. To make a call, tap the desired contact. Assign a speed dialling number To add a contact to the Favourites view, tap an unassigned button (indicated with ) and do one of the following: • To add a contact downloaded from your mobile phone, tap the first few letters of the desired name, , and the desired name and phone number.
Call handling If you press the menu key to view the map and minimise the in-call options screen, the number of calls is shown beside . ■ In-call options You can use some call functions during a call. The available functions are shown in an in-call options screen that is displayed when you start a call. To minimise the in-call options screen, for example, to view the map, press the menu key during a call. To open the in-call options screen, tap .
Call handling Bluetooth To turn the Bluetooth feature on or off, in Bluetooth, tap the current setting until the desired option is displayed. Contacts download To download contacts from the currently connected mobile phone, tap the download status in Contacts download and Yes. The download status can be Not done (contacts have not been downloaded from the device), In progress (contacts are being downloaded), or Finished (contacts have been downloaded).
Music player 6. Music player To play songs that you have saved on the memory card, press the menu key, and tap Music. To copy files to the memory card, see “Memory card,” p. 19. To easily find the songs in the Music application, copy them to the Music folder. The application supports the MP3, WMA, AAC, and eAAC+ file formats. However, the application does not necessarily support all the variations of these formats.
Music player volume to the desired level. You should hear the music from your car radio system. The use of the FM transmitter increases the demand on battery power and reduces the battery life. Headphones The navigation device has a stereo audio-out connector for compatible headphones with a 3.5-mm plug. The connector is compatible with 32ohm or higher impedance headphones. ■ Listen to music To open a music folder, tap the songs, tap or . and the desired folder.
Music player To delete a song from the memory card, tap song that you want to delete, and . To close the music player, tap in the player screen, the . ■ Exit to navigation screen To go to Navigator while listening to music, press the menu key, or tap . The music continues to play in the background. To return to the music player, press the menu key, and tap Music. If navigation is not active, the left part of the screen shows two shortcut buttons to Navigator.
Video player 7. Video player To watch video clips that you have saved on the memory card, press the menu key, and tap Gallery > Videos. To copy files to the memory card, see “Memory card,” p. 19. To easily find the video clips in the Videos application, copy them to the Video folder. The application supports the MPEG-4, 3GP, and WMV file formats. However, the application does not necessarily support all the variations of these formats.
Video player • To pause playing, tap tap . . To resume playing, tap • To play the next or previous video, tap or . To stop playing, . • To view the video in full screen or to return to normal view, tap the video. • To play the video continuously, tap . The icon turns green. To play the video only once, tap the same icon. The icon turns white. To return to the previous screen, tap To close the video player, tap . . To go to Navigator, press the menu key.
Image viewer 8. Image viewer To view images that you have saved on the memory card, press the menu key, and tap Gallery > Images. To copy files to the memory card, see “Memory card,” p. 19. To easily find the images in the Images application, copy them to the Photos folder. The application supports the JPEG, BMP, PNG, and GIF file formats. However, the application does not necessarily support all the variations of these formats. ■ View images To open an image folder, tap the images, tap or .
Image viewer • To view the image in full screen, tap . Tap the left side of the image to view the previous image or the right side to view the next image. To return to normal view, tap the middle of the image. • To rotate the image by 90 degrees, tap . • To view images as a slide show, select several images, and tap return to normal view, tap the displayed image. To delete an image from the memory card, tap the image that you want to delete, and .
Battery information 9. Battery information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. • Do not use or store the device in dusty, dirty areas.
Care and maintenance is available from the product retailer, local waste authorities, national producer responsibility organizations, or your local Nokia representative. For the product Eco-Declaration or instructions for returning your obsolete product, go to country-specific information at www.nokia.com.
FCC/Industry Canada notice FCC/Industry Canada notice NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: Changes or modifications not expressly approved by Nokia could void the user's authority to operate the equipment.
