User Manual

Adjusting the settings
22
4. Adjusting the settings
Press Options > Advanced > Settings to get the following list of
settings:
Bluetooth - configure the settings for your Bluetooth connections:
• Bluetooth - select On if you want to use Bluetooth wireless
technology. If you select Off, all active Bluetooth connections
are closed, and Bluetooth wireless technology cannot be used
for sending or receiving data.
• My device’s visibility - select Shown to all if you want the
Image Album to be found by other devices during the device
search. Select Hidden if you want to hide the Image Album from
other devices.
• My device's name - enter a name for the Image Album. After
you have switched Bluetooth on and changed My device's
visibility to Shown to all, this name can be seen by other
devices.
• Paired devices - view the Bluetooth devices paired with the
Image Album. To pair a new device, press Options > New paired
device. See “Pairing with a Bluetooth device” on page 20.
• Passcode - enter a 4-digit passcode for the Image Album. The
preset passcode is 1234.
General settings - configure the appearance of the Image Album:
• Audio feedback - select whether you want the TV to emit a
tone when you press a key on the remote control.
• Slide show delay - enter the number of seconds for which you
want a file to appear in a slide show.
• Language - set the language for the Image Album.
• Time & date format - set the current time and date, and define
the format in which the time and date are shown.
• Factory settings - remove the current settings and restore the
Image Album to the preconfigured factory settings. Note that
Image_album_0107.fm Page 22 Thursday, July 1, 2004 11:50 AM