User Manual

Using the Image Album

Assigning a short name for a paired device

Define a short name to help you recognise a certain device. This name is

stored in the Image Album memory and cannot be seen by other device

users.

1 Press Options > Advanced > Settings, and select Bluetooth >

Paired devices.

2 Press Change, select the paired device from the list, and press

Options > Assign short name. Write the short name, and press OK.

■ Printing images

You can print images with a compatible printer with Bluetooth wireless

technology.

1 Open an image, and press Options > Print.

2 The Image Album starts to search for devices within range. Devices

using Bluetooth wireless technology, that are within range, start to

appear on the display one by one.

If you have searched for Bluetooth devices earlier, a list of the

devices that were found previously is shown first. To start a new

search, press More devices.

3 Select the desired printer, and press Select.

4 Enter the passcode of the printer, if prompted.

■ Connecting to a PC

You can connect the Image Album to a compatible PC, and make backup

copies of your files.

Connect the USB cable of a compatible PC to the USB connector of the

Image Album. See “Figure 2” on page 7. The Image Album can now be

seen as a removable drive on the PC.

Note: Always switch the device off, and remove from the power

supply before connecting or modifying the cables.

Note that you cannot use the Image Album while it is connected to a PC.

Image_album_0107.fm Page 21 Thursday, July 1, 2004 11:50 AM