User Manual

Using the Image Album
18
comments.
2 Enter the comment with the character keys, and press OK.
To see the comment, press Options > Advanced > View comments.
Setting up a slide show
You can display your files as a slide show.
1 Open the folder containing the items that you want to present in the
slide show.
2 Press Options > Advanced > Slide show.
The Image Album displays the folder contents. To pause the slide show,
press Options > Pause slide show. To stop the slide show, press Stop.
To set the time for which a file is displayed in a slide show, see
“Adjusting the settings” on page 22.
Backing up files on a CD
You can back up files from the Image Album on a CD-ROM with a
compatible CD writer.
Note: Always switch the device off, and remove it from the
power supply before connecting or modifying the cables.
1 Connect a compatible CD writer to the USB connector on the back
panel of the Image Album. See “Figure 2” on page 7.
2 Press Options > Advanced > Create CD.
3 Press Start, scroll to the desired files or folders, and press Options >
Add at each file or folder.
4 Press Options > Confirm selected items, and check the contents
that you have selected for the CD. If you want to change the
contents, press Options > Change selected items.
5 When the contents are ready, press Options > Write CD.
Before you remove any files from the Image Album, make sure that the
files were backed up on the CD successfully.
Image_album_0107.fm Page 18 Thursday, July 1, 2004 11:50 AM