User Manual
Table Of Contents
- 1 FOR YOUR SAFETY
- 2) Welcome
- 3) Prepare your phone for use
- 4) Get to know your phone
- 5) Make and answer calls
- 6) Use phone menus
- 7) Enter characters into your phone
- 8) Use the phone book
- • Use phone book menus
- • Add names and numbers
- • Change a stored phone number
- 1 Press Names.
- 2 When Search appears, press Select.
- 3 Enter the first few letters of the name of the phone book entry you want to change, and press OK.
- 4 Press Details to view the number.
- 5 Press Options.
- 6 If Edit is not highlighted, scroll to it. Press Select.
- 7 Press OK. The associated number appears. To move the cursor, scroll up and down. To erase one c...
- 8 Enter the new number, and press OK.
- • Recall and redial numbers
- 1 At the Start screen, press or to display the names and associated numbers that are stored in yo...
- 2 Scroll to the appropriate name. Press to dial the associated number.
- 1 At the Start screen, press Names.
- 2 Enter the first few letters of the name you want to call.
- 3 When the appropriate name/number appears on the screen, press to dial this number.
- 1 At the Start screen, press Names.
- 2 At Search, press Select.
- 3 Enter the name of the person you want to call, and press OK.
- 4 When the appropriate name/number appears on the Start screen, press to dial this number.
- 1 Or press and scroll through the dialed calls list and press the Talk key again to dial the desi...
- • Erase stored names and numbers
- • Erase the entire phone book
- • Check memory status
- 9) Use voice mail
- 10) Work with the call log
- 11) Use advanced calling features
- • Set in-call options
- • Use network feature codes
- 1 Press Menu 4 - 4 - 5 (Settings - Network services - Network feature setting).
- 2 Enter the feature code (for example, ), and press OK.
- 3 Scroll to the service name for that code, and press Select.
- 1 Use the appropriate menu shortcut for the feature you want to activate (Settings - Network serv...
- 2 Scroll to Activate, and press OK.
- 1 Use the appropriate menu shortcut for the feature you want to deactivate (Settings - Network se...
- 2 Scroll to Cancel, and press OK.
- • Use call waiting
- • Use Caller ID
- • Make a conference call
- • Use call forwarding
- • Redial automatically
- • Use a calling card
- Notes
- 1 Press Menu 4 - 1 - 3 (Settings - Call settings - Calling card).
- 2 Scroll until the name of the card you want to enter or edit appears. By default, the card names...
- 3 Scroll to Edit, and press OK.
- 4 Enter your security code, and press OK.
- 5 Press Select.
- 6 Determine the dialing sequence for your card. Scroll the list of dialing sequences until the on...
- 7 When you are prompted, enter the information (access number, card number, or prefix number). Af...
- 8 When you finish entering the calling card information, Save changes? appears. Press OK.
- 9 Scroll to Card name, press Select, and enter a card name.
- 10 Press OK.
- 1 Press Menu 4 - 1 - 3 (Settings - Call settings - Calling card).
- 2 Scroll until the name of the calling card appears, and press Options.
- 3 Scroll to Select, and press OK.
- 4 Enter your security code, and press OK.
- 1 At the Start screen, enter the phone number of the party you are calling. Include any necessary...
- 2 Press and hold until the message Card call appears.
- 3 When the message Wait for tone, then press OK appears, listen for the tone from your calling ca...
- Notes
- • Choose to block caller ID
- • Select a phone number
- • Set touch tones
- 1 Press Menu 4 - 2 - 3 - 1 (Settings - Phone settings - Touch tones - Manual touch tones).
- 2 Select one of the following options, then press OK:
- 1 Press Menu 4 - 2 - 3 - 2 (Settings - Phone settings - Touch tones - Touch tone length).
- 2 Scroll to Short (0.1 second) or Long (0.5 second).
- 3 Press OK.
- Store touch tone strings with phone numbers
- Send a touch tone string
- 1 Press Menu 4 - 2 - 3 - 1 (Settings - Phone settings - Touch tones - Manual touch tones).
- 2 Verify that the setting is not set to Off. (If so, select a different option. Press OK.)
- 3 During your call, press Options. Scroll to Touch tones. Press OK.
- 4 Enter or recall the touch tone string from the phone book. Press OK.
- 12) Customize your phone
- • Understand profiles
- • Select a profile
- • Customize a profile
- 1 Press Menu 3 (Profiles).
- 2 Scroll to highlight a profile.
- 3 Press Options to view the options for the selected profile.
- 4 Select one of the following options, then press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to the profile where you want to set the ringing options, and press Options.
- 3 Highlight Customize, and press OK.
- 4 Scroll to Ringing options, and press Select.
- 5 Scroll to highlight the desired ringing option, then press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to the profile where you want to set the ringing volume. Press Options.
- 3 Highlight Customize, and press OK.
- 4 Scroll to Ringing volume, and press Select.
- 5 Scroll through the options. When you hear the volume level you wish to use, press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to the profile where you want to set the ringing tones.
- 3 Press Options.
- 4 Highlight Customize, and press OK.
- 5 Scroll to Ringing tone, and press Select.
- 6 Scroll to the ringing tone you want to use, and press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to the profile to be set the vibrating alert. Press Options.
- 3 Highlight Customize, and press OK.
- 4 Scroll to Vibrating alert, and press Select.
- 5 Scroll to On, and press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to the profile for which you want to set the keypad tones. Press Options.
- 3 Scroll to Customize, and press OK.
- 4 Scroll to Keypad tones, and press Select.
- 5 Scroll to highlight the desired level (or Off), and press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to the profile you want to change, and press Options.
- 3 Scroll to Customize, and press OK.
- 4 Scroll to Warning and game tones, then press Select.
- 5 Scroll to On or Off and press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to the profile for which you want to set the message alert tone. Press Options.
- 3 Highlight Customize, and press OK.
- 4 Scroll to Message alert tone, and press Select.
- 5 Scroll through your choices. The phone plays a sample of each choice as you scroll to it.
- 6 When you find the tone you want, press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to the Handsfree or Headset profile, and press Options.
- 3 Scroll to Customize, and press OK.
- 4 Scroll to Automatic answer, and press Select.
- 5 Scroll to On, and press OK.
- 1 Press Menu 3 (Profiles).
- 2 Scroll to Handsfree profile, then press Options.
- 3 Highlight Customize, and press OK.
- 4 Scroll to Lights, and press Select.
- 5 Scroll to Automatic or On, and press OK.
- • Rename profiles
- • Restore factory settings
- • Choose a display language
- • Set and display the clock
- 1 Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
- 2 Scroll to Time format, and press Select.
- 3 Scroll to the desired time format (24-hour or am/pm). Press OK.
- 1 Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
- 2 Scroll to Time settings, and press Select.
- 3 Scroll to Set by network, and press Select.
- Notes
- 1 Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
- 2 Scroll to Time settings, and press Select.
- 3 Scroll to Set clock, and press Select.
- 4 Enter the current time. For example, to enter 7:30, enter 0730. Press OK.
- 5 Scroll to am or pm, and press OK.
- 1 Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
- 2 Press Select.
- • Add a welcome note
- 1 Press Menu 0 - 1 - 3 (Messages - Welcome note).
- 2 Enter the text of the welcome note.
- 3 Press Options.
- 4 Scroll to Save, and press OK.
- 1 Press Names and scroll to one-touch dialing.
- 2 Press Select.
- 3 Scroll to a number that has the message (empty), and press Assign.
- 4 Scroll to the name and number to which you want to assign this key. Press Select. Repeat these ...
- 1 Press Names.
- 2 Scroll to one-touch dialing, and press Select.
- 3 Scroll to the key you want to change, and press Options.
- 4 Scroll to Change, and press Select.
- 5 Scroll through the phone book.
- 6 When you reach the new number, press Select.
- 1 Press Names.
- 2 Scroll to one-touch dialing, and press Select.
- 3 Scroll to the key you want to erase, and press Options.
- 4 Scroll to Erase, and press Select.
- 5 Press OK.
- • Use emergency key 9
- • Identify callers by custom ringing tones
- 1 In your phone book, find the entry where you will assign the custom ringing tone.
- 2 Press Details, then Options (or, if the scrolling view for your phone book is set to Name+numbe...
- 3 Scroll to Custom tone, and press Select.
- 4 Scroll through the ringing tones list until the desired tone is highlighted.
- 5 Press OK.
- • Press any key to answer a call
- 13) Security
- • Change your security code
- 1 Press Menu 4 - 3 - 2 - 4 (Settings - Security settings - Access codes - Change security code).
- 2 Enter the security code. (The default code is 12345.) Press OK.
- 3 Enter the new code. To prevent accidental emergency calls, don’t enter a code that is similar t...
- 4 To verify your new security code, enter it again. Press OK. The message Security code changed a...
- • Protect your phone with phone lock
- 1 Press Menu 4 - 3 - 2 - 1 (Settings - Security settings - Access codes - Phone lock).
- 2 Enter the lock code, and press OK.
- 3 Scroll to On (lock) or Off (unlock). Press OK. If you choose to lock your phone, it will be loc...
- 1 Press Menu 4 - 3 - 2 - 2 (Settings - Security settings - Access codes - Unlocked phone number).
- 2 Enter the lock code. Press OK. The Number field appears.
- 3 Enter a phone number (or press Search to find the number).
- 4 Press Options.
- 5 Scroll to Save, then press OK.
- 1 Press Menu 4 - 3 - 2 - 3 (Settings - Security settings - Access codes - Change lock code).
- 2 Enter the lock code. (The default lock code is 1234, or the last four digits of your phone numb...
- 3 Enter the new lock code. Only numeric characters are accepted. To prevent accidental emergency ...
- 4 Press OK.
- 5 Verify the new lock code, and press OK. Store your new code in a safe place, away from your phone.
- • Use Keyguard to lock the keypad
- • Restrict calls
- 1 Press Menu 4 - 3 - 1 (Settings - Security settings - Restrict calls).
- 2 Press Select.
- 3 Enter your security code, and press OK.
- 4 Scroll to Add restriction, and press OK.
- 5 Enter the number you want to restrict, and press OK.
- 1 Press Menu 4 - 3 - 1 (Settings - Security settings - Restrict calls).
- 2 Scroll to Restrict incoming calls, and press Select.
- 3 Enter your security code, and press OK.
- 4 Scroll to All calls, and press Mark.
- 5 Press Back.
- 6 Press Yes.
- • Change your security code
- 14) Select System
- 15) Send and receive mobile messages
- • About writing messages
- 1 Press Menu 0 - 1 - 1 - 1 (Messages - Text messages - Write new).
- 2 You may address your message or write it first and address it later.
- 1
- . , @ ’ ? ! -1
- 7
- PQRS7
- 2
- ABC2
- 8
- TUV8
- 3
- DEF3
- 9
- WXYZ9
- 4
- GHI4
- 0
- Enters an empty space or 0
- 5
- JKL5
- *
- Special characters
- 6
- MNO6
- #
- Changes letter case; long press toggles between ABC/abc & 123 mode
- • Working with predictive text input
- 1 Press Options.
- 2 Scroll to Predictive text.
- 3 Press Select.
- 4 Scroll until the language you want appears, then press OK.
- 1 While editing a message, press Options.
- 2 Scroll to Predictive text. The language list displays.
- 3 On the language list, scroll to Prediction off and press OK. Your phone is now in traditional (...
- 4 You can also use multitap on the pound key (#) to go to traditional text in a message.
- 1 If the ? character appears after the word, press Spell, or at any time while you are editing, p...
- 2 Enter the word using traditional text input, and press OK. If the dictionary is full, the new w...
- 1 While editing a message, press Options.
- 2 Scroll to Predictive text, then press Select.
- 3 Scroll to a language, then press OK. The selected language is active.
- • Write with predictive text Input
- 1 Press each key only once for each letter of the word. For example, to write hello, press 4 - 3 ...
- 2 When you finish the word, check to make sure that the word is correct.
- 3 If the word is correct, enter a space (press the 0 key) and write the next word.
- 4 If the word is incorrect and is underlined, press the Star key () repeatedly until the desired ...
- 5 If the ? character appears after the word, there are no more words in the dictionary that corre...
- 1 Write the first part of the word (blue).
- 2 Press (do not enter a space). The underline disappears from the first part.
- 3 Write the second part of the word (jay).
- 1 While you are editing a message, press Options.
- 2 Scroll to Add template, then press Select.
- 3 Scroll to the template you want to use. For example:
- • Receive a mobile message
- • Message options
- • Message storage
- • Create a text message
- • Send a message
- • Erase messages
- • Reply to a message
- • Forward a message
- • About writing messages
- 16) Send and receive e-mail messages
- • Save e-mail addresses
- 1 At the Start screen, press Names, then at Search, press Select.
- 2 Enter the first two letters of the name you want to find. Press OK.
- 3 Press Options (or press Details if the Name list view is selected in your phone book), and scro...
- 4 Enter the address.
- 5 When you finish entering the address, press OK.
- 1 At the Start screen, press Names. Scroll to Add new. Press Select.
- 2 Enter the name. Press OK.
- 3 Enter the phone number. Press OK.
- 4 Press Options, scroll to E-mail address. Press Select.
- 5 Enter the address. Insert special characters such as the “dot” and @ signs by pressing .
- 6 Press OK.
- 1 At the Start screen, press Names, then at Search, press Select.
- 2 Enter the first two letters of the name you want to find. Press OK.
- 3 Press Options (or press Details if the Name list view is selected in your phone book), and scro...
- 4 Enter any changes, using the scroll keys to move the insertion point backward and forward in th...
- 5 When the address is correct, press OK.
- • Send an e-mail message
- • Reply to or forward an e-mail message
- 1 If the message is not on the screen, press Menu, Message, Text messages and Inbox (Menu 0 - 1 -...
- 2 Select the message you received. Press Read.
- 3 Press Options. Scroll to Forward or Reply. Press OK.
- 4 Scroll to As e-mail. Press Select.
- 5 Enter the recipient’s e-mail address or press Search to find the name.
- 6 Enter a subject line. Press OK. The subject line holds up to 26 characters. You can leave it bl...
- 7 When the message box opens, write your reply or message you want to add when you forward the ma...
- 8 When you’ve finished your message, press Options. Scroll to Send. Press OK.
- • Save e-mail addresses
- 17) Minibrowser
- 18) Use your personal assistant
- • Use the calendar
- 1 Go to the day you want, and press Options.
- 2 Scroll to Make note, and press Select.
- 3 Scroll to the type of note you want to create (Reminder, Call, Meeting, or Birthday). Press OK.
- Reminder
- 1 Enter the information, and press OK. The current date appears.
- 2 To answer the Set alarm for the note? question, press Yes or No.
- 3 Enter the date on which you want the alarm to sound, and press OK.
- 4 Enter the time when you want the alarm to sound. Use the hh:mm format. Press OK.
- 5 Select either am or pm, and press OK.
- Call
- 1 Enter a number or press Search and find the number, then press OK. The Date field appears.
- 2 Enter the date when you need to make this call, and press OK. The Time field appears.
- 3 Enter the time when you need to make this call. Using the hh:mm format. Press OK.
- 4 Select am or pm, and press OK. Set alarm for the note? appears.
- 5 To answer the Set alarm for the note? question, press Yes or No.
- 6 Enter the date when you want the alarm to sound, and press OK. The Alarm time field appears.
- 7 Enter the time (hh:mm format) for the alarm to sound. Press OK.
- 8 Select am or pm, and press OK. Calendar note saved appears.
- Meeting
- 1 Enter the information, and press OK.
- 2 Enter the time when you need to go to this meeting using the hh:mm format. Press OK. Select am ...
- 3 Answer the Set alarm for the note? question, press Yes or No.
- 4 Enter the date when you want the alarm to sound, and press OK.
- 5 Enter the time when you want the alarm to sound. Use the hh:mm format. Press OK.
- 6 Select either am or pm, and press OK.
- Birthday
- 1 Enter the name of the person having a birthday, and press OK. The Date field appears.
- 2 Enter the month and day of the person’s birthday, and press OK. The Year of birth field appears.
- 3 Enter the year using the yyyy format. Press OK. Set alarm for the note? appears.
- 4 Press Yes or No.
- 5 Enter the date when you want the alarm to sound, and press OK. The Alarm time field appears.
- 6 Enter the time for the alarm to sound. Use hh:mm format. Press OK.
- 7 Select either am or pm, and press OK. Calendar note saved appears.
- 1 Press Options.
- 2 Scroll to View day notes.
- 3 Press Select.
- Erase the note you’re viewing
- Erase the notes for a given day
- Erase one note at a time for each note in your calendar
- Erase all notes in your calendar
- • Download ringing tones
- • Alarm clock
- • Calculator
- • Use the calendar
- 19) Games
- 20) Reference information
- 21) Frequently Asked Questions (FAQ)
- 22) Technical Information
- 23 NOKIA One Year Limited Warranty
- 1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purc...
- 2 The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is ...
- 3 The limited warranty extends only to Consumers who purchase the Product in the United States of...
- 4 During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any ...
- 5 Upon request from Nokia, the Consumer must prove the date of the original purchase of the Produ...
- 6 The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia ...
- 7 The Consumer shall have no coverage or benefits under this limited warranty if any of the follo...
- a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposur...
- b) The Product has been damaged from external causes such as collision with an object, or from fi...
- c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the P...
- d) The Product serial number plate or the accessory data code has been removed, defaced or altered.
- e) The defect or damage was caused by the defective function of the cellular system or by inadequ...
- 8 Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem devel...
- a) The Consumer shall return the Product to the place of purchase for repair or replacement proce...
- b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the...
- c) The Consumer shall include a return address, daytime phone number and/or fax number, complete ...
- d) The Consumer will be billed for any parts or labor charges not covered by this limited warrant...
- e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the P...
- f) If the Product is returned during the limited warranty period, but the problem with the Produc...
- 9 YOU (THE CONSUMER) UNDERSTAND THAT THE PRODUCT MAY CONSIST OF REFURBISHED EQUIPMENT THAT CONTAI...
- 10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE ...
- 11 Some states do not allow limitation of how long an implied warranty lasts, so the one year war...
- 12 Nokia neither assumes nor authorizes any authorized service center or any other person or enti...
- 13 This is the entire warranty between the Nokia and the Consumer, and supersedes all prior and c...
- 14 This limited warranty allocates the risk of failure of the Product between the Consumer and No...
- 15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months fol...
- 16 Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Servi...
- 17 The limited warranty period for Nokia supplied attachments and accessories is specifically def...
[ 61 ]
12
Manually set the clock
By default, the clock is automatically set by the wireless network. You can
override the network and set the clock manually.
1 Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
2 Scroll to Time settings, and press Select.
3 Scroll to Set clock, and press Select.
4 Enter the current time.
For example, to enter 7:30, enter 0730. Press OK.
5 Scroll to am or pm, and press OK.
Display or hide the clock
1 Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
Depending on the current setting, either Hide time/day or Show
time/day will be highlighted.
2 Press Select.
• ADD A WELCOME NOTE
You can set your phone to display a welcome note each time you switch on
your phone. This note could say, for example: Hello. It could include your
name, a reminder, or more. The maximum length of this note is 36 characters.
1 Press Menu 0 - 1 - 3 (Messages - Welcome note).
2 Enter the text of the welcome note.
Characters you enter are added to the left of the cursor.
• To delete characters to the left of the cursor, press Clear.
• To move the cursor, press or .
3 Press Options.
4 Scroll to Save, and press OK.
To delete (erase) the welcome note, press Menu 0 - 1 - 3
(Options - Erase - OK).