User Manual
Table Of Contents
- FCC Draft User Guide for Nokia 6800 Phone
- Phone notes
- Legal Information
- Export Controls
- FCC/Industry Canada Notice
- Contents
- 1. For your safety 1
- 2. An overview of functions 4
- 3. Welcome and quick guide 7
- 4. Basic operations 33
- 5. Text entry 39
- 6. Manage phone security 44
- 7. The Phone book 51
- 8. Menu functions 61
- 9. Gallery (Menu 8) 118
- 10. Games (Menu 9) 120
- 11. Accessories 143
- 12. Referenceinformation 146
- 13. Troubleshooting 155
- 14. Frequently Asked Questions 156
- 15. Glossary 159
- 16. Technical information 161
- 17. Nokia One-Year Limited Warranty 162 Appendix A 167 Appendix B 171
- 1 For your safety
- ROAD SAFETY COMES FIRST
- INTERFERENCE
- SWITCH OFF IN HOSPITALS
- SWITCH OFF IN AIRCRAFT
- SWITCH OFF WHEN REFUELLING
- SWITCH OFF NEAR BLASTING
- USE SENSIBLY
- QUALIFIED SERVICE
- Observe infrared precautions
- ACCESSORIES AND BATTERIES
- WATER-RESISTANCE
- BACKUP COPIES
- CONNECTING TO OTHER DEVICES
- Fuse replacement
- CALLING
- EMERGENCY CALLS
- • About accessories
- 2 An overview of functions
- 3 Welcome and quick guide
- • Get the most out of this guide
- • Understand wireless network services
- • Register your phone
- • E-Newsletters
- • Get help
- • Understand your phone
- With flip closed
- 1 Power key Switches the phone on and off. Also when the keypad is locked, to turn on the phone’s...
- 2 Volume key Adjusts the volume of the earpiece, the headset and the loudspeaker.
- 3 Selection keys c and b The function of the keys depends on the text shown on the display above ...
- 4 4-way joystick a Enables scrolling through names, phone numbers, menus or settings. The 4-way j...
- 5 e dials a phone number, and answers a call. In Standby mode it shows the most recently called n...
- 6 d ends an active call, or exits from any function.
- 7 Use the keypad to enter numbers and characters.
- Opening the flip
- With flip open
- 1 Keyboard light key k switches the keyboard light on or off to provide additional lighting while...
- 2 Profile key opens a list of profiles. Press and hold down the key to switch the phone off.
- 3 Backspace h deletes characters
- 4 Enter key i forces line feed in text editing. The enter key also opens a highlighted link on a ...
- 5 Shift keys g and ? enter a space.
- 6 Space bar keys j and ? enter upper case letters and symbols. You can either press the shift key...
- 7 Power key/ Left selection key f switches the power on, when the phone’s messaging keyboard is o...
- 8 Character key l opens a set of characters and symbols.
- Use the antenna
- Use the battery
- Install the SIM card
- With flip closed
- • Switch your phone on or off
- • Check the start screen
- 1 Indicates in which cellular network the phone is currently being used, when no wallpaper is dis...
- 2 Shows the signal strength of the cellular network at your current location. The higher the bar,...
- 3 Shows the battery charge level. The higher the bar, the more power in the battery
- 4 The left selection key is Menu.
- 5 The right selection key is Names.
- • Get started with the Quick Guide
- • Menu shortcuts
- • Get help
- • Use the selection and Joystick keys
- • Browse phone menus
- Use the scroll method
- Use a shortcut
- Check in-phone help
- Menu shortcuts
- 1 Messages
- 2 Call log
- 3 Profiles
- 4 Settings
- 5 Organizer
- 6 Notes
- 7 Radio
- 8 Gallery
- 9 Games
- 10 Applications
- 11 Extras
- 12 Connectivity
- 13 Services
- 4 Basic operations
- • Set the clock
- • Make and answer calls
- • Call and setup your voicemail
- 1 Once you’ve saved the voice mailbox number, press and hold 1.
- 2 When you connect and the pre-recorded greeting begins, follow the automated instructions to set...
- Listen to your voice messages
- Make a conference call
- 1 Make a call to the first participant.
- 2 To call a new participant, press Options, scroll to New call, and press Select.
- 3 Enter the phone number of the new participant (or press Find to retrieve a number from your Pho...
- 4 When the new call picks up, press Options, scroll to Conference, and press Select to connect th...
- 5 To add a new participant to the call, repeat steps 2 through 4.
- have a private conversation with one of the participants:
- • Options during a call
- • Set up your phone
- 5 Text entry
- • Writing with the messaging keyboard
- • Writing with the flip closed
- Setting predictive text input on or off
- Using predictive text input
- 1 Start writing a word using the keys 2 to 9. Press each key only once for one letter. The word c...
- 2 When you have finished writing the word and it is correct, confirm it by adding a space with 0 ...
- 3 If the ? character is displayed after the word, the word you intended to write is not in the di...
- 4 Start writing the next word.
- Writing compound words
- Using traditional text input
- Tips for writing text
- 6 Manage phone security
- Lock the keypad (Keyguard)
- Unlock the keypad
- • Security levels
- • Fixed dialing
- Set up and activate a fixed dialing list
- 1 At the Start screen, press Menu 4-8-3 (Settings - Security Settings - Fixed dialing). After a b...
- 2 Scroll to Number list and press Select. Fixed dialing not active and then Fixed dialing list em...
- 3 You’re prompted to enter the PIN2 code. Enter the PIN2 code and press OK.
- 4 Enter the fixed dialing number, or press Find to retrieve a number from your Phone book, and pr...
- 5 Enter a name for the number and press OK. A confirmation note appears in the display and you’re...
- 6 Press Back, scroll to On and press Select to activate fixed dialing.
- View or edit the fixed dialing list
- 1 At the Start screen, press Menu 4-8-3 (Settings - Security Settings - Fixed dialing).
- 2 Scroll to Number list and press Select.
- 3 You’re prompted to enter the PIN2 code. Enter the PIN2 code and press OK.
- 4 Any numbers which you’ve assigned to fixed dialing appear in the display.
- 5 Scroll to a number and press Options.
- 6 The options in the following table appear in the display.
- Notes about fixed dialing
- Set up and activate a fixed dialing list
- • Access codes
- The security code
- Change your security code
- 1 Press Menu 4-8-6-1 (Settings - Security settings - Access codes - Change security code).
- 2 Enter the current security code and press OK. You’re prompted to enter the new security code.
- 3 Enter the new security code (up to 10 characters) and press OK. You’re asked to re-enter the ne...
- 4 Enter the new security code again and press OK. A message appears in the display confirming you...
- Change your security code
- The PIN code
- PIN code request
- Change your PIN code
- 1 Press Menu 4-8-6-2 (Settings - Security settings - Access codes - Change PIN code).
- 2 After a brief pause, you’re prompted to enter the current PIN code. Enter the PIN code and pres...
- 3 You’re prompted to enter the new PIN code. Enter the new PIN code and press OK.
- 4 You’re prompted to re-enter the new PIN code for verification. Enter the new PIN code again and...
- The PIN2 Code
- Change your PIN2 code
- 1 Press Menu 4-8-6-3 (Settings - Security settings - Access codes - Change PIN2 code). You’re pro...
- 2 Enter the current PIN2 code and press OK. You’re prompted to enter the new PIN2 code.
- 3 Enter the new PIN2 code and press OK. You’re asked to verify the new PIN2 code by entering it a...
- 4 Enter the new PIN2 code again and press OK. A message appears in the display confirming you’ve ...
- Change your PIN2 code
- Personal unblocking key (PUK) codes
- Closed user groups
- The security code
- 7 The Phone book
- • View the Phone book menu
- • Save names and numbers
- Quickly save a name and number
- Quickly save (only) a number
- Save an entry using the Phone book menu
- Save addresses and notes
- 1 Find the entry (name) in your Phone book to which you’d like to add an address or note.
- 2 With the entry highlighted, press Details.
- 3 Press Options, scroll to Add detail and press Select.
- 4 Scroll to the address or note of your choice and press Select.
- 5 Enter the text for the note or address and press OK.
- Select your Phone book view and memory
- Save multiple numbers and text items per name
- 1 At the Start screen, move the joystick up or down and scroll to the entry to which you wish to ...
- 2 Press Details, and then press Options.
- 3 Scroll to Add number or Add detail and press Select.
- 4 Scroll to one of the following types and press Select:
- 5 Enter the number or text for the type you’ve selected and press OK. To change the type, select ...
- Change the default (primary) number
- Search for a name in the Phone book
- 1 At the Start screen, move the joystick up or down to display the contents of your Phone book.
- 2 Press the key which corresponds to the first letter of the name for which you are performing a ...
- 3 Move the joystick up or down to scroll through names in the list.
- 4 Press Details to view the details of the selected name.
- Edit a name, number or text item
- Erase names and numbers
- 1 At the Start screen, press Names, scroll to Erase, and press Select.
- 2 To delete individual names and numbers, scroll to One by one and press Select.
- 3 Scroll to the entry you wish to erase, press Erase, and press OK to confirm the erasure.
- 4 To delete the entire contents of your Phone book, scroll to Erase all, then scroll to the phone...
- 5 Press Erase, then press OK to confirm. You’re asked to enter the security code.
- 6 Enter the security code and press OK.
- • Copy Phone book entries
- 1 At the Start screen, press Names, scroll to Copy, and press Select.
- 2 Scroll to From phone to SIM card or From SIM card to phone and press Select. The following opti...
- 3 Scroll to the copy method of your choice and press Select.
- 4 Scroll to the entry you wish to copy and press Copy.
- 5 Scroll to Keep original or Move original and press Select. The entry is copied and you’re retur...
- 6 If you selected All or Primary nos. in step 3, scroll to Keep original or Move original and pre...
- 7 Press OK to confirm your choice. All entries are copied to the selected destination. Press Back...
- Send and receive business cards
- Receive a business card via IR
- Send a business card
- 1 Highlight an entry from the Phone book that you wish to send and press Details.
- 2 Press Options, scroll to Send bus. card and press Select.
- 3 If you selected Via infrared (and the entry has multiple sub-entries) scroll to Primary no. or ...
- 4 If you selected Via text message (and the entry has multiple sub- entries), scroll to Primary n...
- 5 Enter the number for your recipient or press Find to retrieve a number from your Phone book.
- 6 Press OK and the business card is sent.
- • 1-touch dialing
- Assign a key to 1-touch dialing
- 1 At the Start screen, press Names, scroll to 1-touch dialing and press Select.
- 2 Scroll to any empty slot and press Assign.
- 3 Enter the number (including the area code) and press OK, or press Find to retrieve a number fro...
- 4 Enter a name for the number and press OK. The entry appears in the slot you’ve assigned.
- Make a call with 1-touch dialing
- Change 1-touch dialing numbers
- 1 At the Start screen, press Names, scroll to 1-touch dialing and press Select.
- 2 Scroll to the 1-touch dialing entry you wish to change and press Options.
- 3 Scroll to Change and press Select.
- 4 Enter the new number, or press Find to retrieve a number from your Phone book, and press OK.
- 5 Enter a name for the entry and press OK.
- Erase 1-touch dialing numbers
- Change 1-touch dialing numbers
- Assign a key to 1-touch dialing
- • View Info, Service, and Own numbers
- 1 Press Names at the Start screen, scroll to one of the number types in the following table, and ...
- 2 To view details of any of the number types in the previous table, press Details when the number...
- Caller groups
- Setup a caller group
- 1 At the Start screen, move the joystick up or down to display a list of entries in your Phone book.
- 2 Scroll to a name you’d like to add to a caller group and press Details.
- 3 Press Options, scroll to Caller groups, and press Select.
- 4 Scroll to the caller group to which you’d like to add the name and press Select. A confirmation...
- 8 Menu functions
- Messages menu
- Before you can send and receive messages
- Message icons
- i
- Choose your message type
- 1 At the Start screen, press Menu 01-7 (Messages - Message settings).
- 2 After a brief pause, Text messages appears highlighted. Press Select.
- 3 Sending profile is highlighted. Press Select.
- 4 Default profile is highlighted. Press Select.
- 5 Scroll to Messages sent as and press Select.
- 6 Scroll to the message type of your choice and press Select. A message appears in the display co...
- Save your message center number
- 1 At the Start screen, press Menu 01-7 (Messages - Message settings).
- 2 Text messages is highlighted. Press Select.
- 3 Sending profile is highlighted. Press Select.
- 4 Default profile is highlighted. Press Select.
- 5 Message center number is highlighted. Press Select.
- 6 If the box in the display is empty, enter the number given by your wireless provider and press OK.
- 7 If the box is in the display is full, edit the number only if you are sure the number is incorr...
- Choose your message type
- • Write and send a text message
- 1 At the Start screen, press Menu 01-1-1 (Messages - Text messages > Create message).
- 2 After a brief pause, the message entry screen appears in the display.
- 3 Compose a message using the keypad and press Options.
- 4 Scroll to Send and press Select.
- 5 Enter the recipient’s phone number, or press Find to retrieve a number from your Phone book, an...
- Read messages
- Read linked messages
- Reply to a message
- Forward a message
- • Picture messages
- Download pictures
- When you receive a picture message
- 1 Press Show to view the picture message, or press Exit to move it to your inbox.
- 2 If you have more than one picture message, scroll to the message of your choice and press Selec...
- 3 Use the joystick to view the whole picture if necessary.
- 4 Once you’re finished, press Back to move the picture message to the Inbox, or press Options for...
- To save the picture
- Compose and send a picture message
- 1 At the Start screen, press Menu 01-1-1 (Messages - Text messages - Create message).
- 2 Write a message using the keypad (or enter nothing if you choose to just send a picture), and p...
- 3 Scroll to Attach picture and press Select. A list of pictures appear in the display.
- 4 Scroll to a picture and press View.
- 5 Press Attach to insert the picture into your message, otherwise:
- 6 To send the picture message, press Options, scroll to Send, and press Select.
- 7 Enter the phone number for your recipient (or press Find to retrieve a number from your Phone b...
- Preview, change, or erase a picture message
- 1 After a picture has been attached to your message, press Options at the message edit screen.
- 2 Scroll to one of the following options and press Select.
- a) Preview - Previews the attached message before sending. Press Back to return to the list of op...
- b) Change picture - Takes you back to the picture list. Scroll to highlight a new picture, press ...
- c) Erase picture - Press OK to erase the picture from your message, or press Back to return to th...
- • E-mail
- Write down the e-mail server number
- Setup an e-mail profile
- 1 At the Start screen, press Menu - Select and scroll until Message Settings appears in the display.
- 2 Press Select, scroll to Text messages, if necessary, and press Select again.
- 3 Scroll to Sending profile (if necesary) and press Select.
- 4 Scroll to an empty profile slot and press Select.
- 5 Scroll to Messages sent as and press Select.
- 6 Scroll to E-mail and press Select. A confirmation message appears in the display and you’re ret...
- 7 Scroll to E-mail server and press Select.
- 8 Enter the e-mail server number (sometimes referred to as a “gateway” number). You can obtain th...
- 9 Scroll to Accept and press Select. A message appears confirming the e-mail server number has be...
- 10 Scroll until Rename sending profile appears in the display and press Select.
- 11 Enter a name for the profile (such as e-mail) and press OK.
- Write and send e-mail
- 1 At the Start screen, press Menu 01-1-2 (Messages - Text messages - Create e-mail).
- 2 Enter the e-mail address, or press Find to retrieve an e-mail address from your Phone book, and...
- 3 Enter a subject for the e-mail and press OK.
- 4 Compose your e-mail using the keypad and press Options.
- 5 Scroll to Send e-mail (if necessary) and press Select. Your e-mail is sent.
- Reply to a message or e-mail
- • Multimedia messages
- Define MMS settings
- Other MMS settings
- Edit multimedia connection settings
- 1 At the Start screen, press Menu 01-7-2-4 (Messages - Message settings - Multimedia msgs. - Conn...
- 2 Scroll to Edit active multimedia settings and press Select.
- 3 The connection settings in the following table appear in the display. Scroll to a setting. Pres...
- About connection settings
- Select a Font size for your messages
- Write and send a multimedia message
- 1 At the Start screen, press Menu 01-2-1 (Messages - Multimedia messages - Write message). After ...
- 2 Enter the text of your message and press Options.
- 3 Scroll to Insert image or Insert sound clip and press Select.
- 4 Choose your image or sound clip from the list and press Select.
- 5 Scroll to Send to number or Send to e-mail and press Select.
- 6 Enter the number of the recipient, or the email address and press Select. The message is sent.
- Read and reply to a multimedia message
- Instant messaging
- Start an IM session
- 1 At the Start screen, press Menu ??? (Messages - Chat). After a brief pause, you’re prompted to ...
- 2 Enter the recipient’s number or press Find to retrieve a number from the phone book, and press OK.
- 3 Enter your nickname name (up to 5 characters) and press OK.
- 4 Enter your message using the keypad. For faster ways to write a message, see “Write with predic...
- 5 When you’re ready to send the message, press Options, scroll to Send, and press Select.
- 6 When you receive a reply, the message from the other person is shown above your original message.
- 7 To reply to the message, press OK and repeat the steps 4 and 5.
- 8 To end the IM session, press OK and select Quit.
- Start an IM session
- • Voice messages
- • Automate voicemail
- Write down some information
- Setup voicemail with dialing codes
- 1 At the Start screen, press Names, scroll to 1-touch dialing, and press Select.
- 2 Scroll to an empty 1-touch dialing slot and press Assign.
- 3 Enter your voice mailbox number, including the area code.
- 4 Refer to the table entitled “dialing codes,” and enter any codes as necessary using the informa...
- 5 Enter any remaining pauses, PIN codes, and other information that allows you to listen to your ...
- 6 Enter a name (such as Voicemail) and press OK. A message appears in the display confirming your...
- • Message options
- • Organize messages with folders
- Save messages to folders
- View saved messages
- Inbox folder
- Outbox folder
- Archive folder
- Templates folder
- My folders
- add a folder of your own
- Remove a folder
- 1 At the Start screen, press Menu 01-1-7 (Messages - Text messages - My folders). After a brief p...
- 2 Any folders that you’ve created appear in the display. Scroll to the folder you wish to remove ...
- 3 Scroll to Delete folder and press Select. You’re asked to confirm the deletion.
- 4 Press OK to delete or Back to exit.
- Move a message to a folder
- Distribution lists
- 1 Press Menu, select Messages and Distribution lists.
- 2 Select Add list to add a new distribution list. The option is shown, if you have not saved any ...
- 3 At List name: key in the name for the list and press OK.
- 4 Failed messages is a fixed list of the recipients to whom the latest message sending failed. In...
- • Erase messages
- Delete a single message
- 1 Press Menu 01-1 (Messages - Text messages). After a brief pause, a list of options appear in th...
- 2 Scroll to the folder containing the message you wish to erase and press Select. A list of messa...
- 3 Scroll to the message you wish to erase and press Select. The message opens.
- 4 Press Options, scroll to Delete, and press Select.
- 5 You’re asked to confirm the erasure. Press OK to delete the message or Back to exit.
- Delete all messages in a folder
- Change text, e-mail and picture message settings
- Use the info message service
- Use service commands
- Delete a single message
- Call log (Menu 2)
- • Your wireless provider must support caller ID, and it must be enabled
- • Your calls can’t be blocked
- • Your phone must be on and within the service area
- • Call log options
- • View missed calls
- 1 If # missed call appears in the display, press List. The phone number appears in the display.
- 2 Press Options to display the options listed in the table on page87.
- 3 Scroll to an option, press Select to activate the option or to enter its submenu.
- 1 At the Start screen, press Menu 2-1 (Call log - Missed calls).
- 2 Scroll to a number and press Options to display the options listed in the table on page87.
- 3 Scroll to an option, press Select to activate the option or to enter its submenu.
- • View received calls
- • View dialed numbers
- 1 At the Start screen, press e. Your most recently dialed numbers appear in the display.
- 2 At the Start screen, press Menu 2-3 (Call log - Dialed numbers).
- 3 Scroll to a number and press Options to display the options listed in the table on page87.
- 4 Scroll to an option, press Select to activate the option or enter its submenu.
- Call times
- • Erase call lists
- • View call duration
- 1 Duration of last call. At the Start screen, press Menu 2-5-1 (Call log - Call duration - Durati...
- 2 Duration of dialed calls. At the Start screen, press Menu 2-5-3 (Call log - Call timers - Durat...
- 3 Duration of received calls. At the Start screen, press Menu 2-5-2 (Call log - Call timers - Dur...
- 4 Duration of all calls. At the Start screen, press Menu 2-5-4 (Call log - Call timers - Duration...
- Profiles (Menu 3)
- Settings (Menu 4)
- Set the clock
- Show/hide the clock
- Change the time format
- Set the date
- Set or change the date format
- • Call settings
- Call forwarding
- Activate call forwarding
- 1 At the Start screen, press Menu 4-2-1 (Settings - Call settings - Call forwarding).
- 2 After a brief pause, the forwarding options listed in the following table appear in the display.
- 3 Scroll to the option of your choice and press Select.
- 4 Scroll to Activate and press Select.
- 5 Scroll to the destination to which your calls will be forwarded (such as To other no.) and pres...
- 6 Enter the number to which your calls, data, or other information will be forwarded and press OK.
- Cancel call forwarding
- Activate call forwarding
- Anykey answer
- Automatic redial
- 1-touch dialing
- Call waiting
- Activate/deactivate summary after call
- Send own caller ID with next call
- Line for outgoing calls
- Call forwarding
- • Phone settings
- Set the display language
- Cell info display
- Welcome note
- System selection
- Confirm SIM service actions
- Help text
- • Display settings
- • Tone settings
- Organizer(Menu 5)
- • Set an alarm
- • Turn off an alarm
- • Calendar
- • The Monthly view
- • Go to a date
- 1 Press Menu 8-1 (Organizer - Calendar). After a brief pause, the monthly view appears in the dis...
- 2 Press Options, scroll to Go to date, and press Select.
- 3 Enter the date (for example 12/15/2002) and press OK. The monthly view appears in the display w...
- Make a note for a specific date
- 1 Go to the date for which you wan to set a reminder. See “Go to a date” in the previous section ...
- 2 From the monthly view (with the go to date highlighted), press Options.
- 3 Scroll to Make a note, and press Select.
- 4 Scroll to one of the following note types and press Select
- 5 Enter your note, press Options, scroll to Save, and press Select.
- View calendar notes - the Day view
- 1 At the Start screen, press Menu 8-1 (Organizer - Calendar).
- 2 Use four-way scrolling to go to the date containing the note.
- 3 Press Options, scroll to View day, and press Select. Any notes you have for the day will appear...
- 4 To view the body of a highlighted note, press Options, scroll to View and press Select.
- Options while viewing a list of notes
- • Send a Calendar note to another device
- Send a note via Infrared or SMS
- 1 At the Start screen, press Menu 8-1 (Organizer - Calendar). After a brief pause, the monthly vi...
- 2 Jump, or scroll to the date containing the note you wish to send.
- 3 Press Options, scroll to View day, and press Select.
- 4 Scroll to the note you wish to send and press Options.
- 5 Scroll to Send note and press Select.
- 6 Scroll to Send via IR, Send as note, or Send as text, and press Select.
- 7 If you selected Send via IR, align the infrared ports of both devices and press Select. The not...
- 8 If you selected Send as note, enter the number for the recipient (or press Find to retrieve a n...
- 9 Press Options, scroll to Send, and press Select.
- 10 Enter the number for the recipient (or press Find to retrieve a number from your Phone book), ...
- Receive Calendar notes from another device
- View received Calendar notes
- Save received Calendar notes
- Discard viewed Calendar notes
- Send a note via Infrared or SMS
- • Make a to-do list
- Add a to-do note
- 1 At the Start screen, press Menu 8-2 (Organizer - To-do list).
- 2 After a brief pause, press Options. If this is your first time to use the to-do list, Add is hi...
- 3 Press Select, enter your to-do note and press Options.
- 4 Scroll to Save and press Select.
- 5 Scroll to High, Medium, or Low priority and press Select. The to-do note is saved.
- Options while viewing the body of a note
- Add a to-do note
- Radio (Menu 7)
- • Turn the radio on and off
- • Use the radio
- • Save a radio channel
- 9 Gallery (Menu 8)
- 10 Games (Menu 9)
- Applications (Menu 10)
- Extras (Menu 11)
- • Use the calculator
- 1 Press Menu 11-1 (Extras - Calculator). After a brief pause, the calculator screen appears in th...
- 2 Enter the first number in the calculation Press p for a decimal point if necessary.
- 3 Press s to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pa...
- 4 Enter the second number in your calculation.
- 5 Press Options. Equals is highlighted. Press Select. The sum of your calculation appears in the ...
- • Use the currency converter
- 1 At the Start screen, enter a currency amount to convert.
- 2 Press Options, scroll to one of the following and press Select:
- 3 Enter the exchange rate and press OK. Press p to insert a decimal. The converted amount appears...
- Edit the exchange rate
- 1 At the Start screen, press Menu 11-1 (Extras > Calculator). After a brief pause, the calculator...
- 2 Press Options (Exchange rate is highlighted), then press Select and scroll to highlight or disp...
- 3 Press Select to edit your choice.
- 4 Enter the exchange rate and press OK. The exchange rate is saved.
- • Use the countdown timer
- Set the countdown timer
- 1 At the Start screen, press Menu 11-2 (Extras - Countdown timer).
- 2 After a brief pause, you’re prompted to enter the time. Enter 2 digits for hours, 2 digits for ...
- 3 Enter a note for the timer, then press OK. The timer begins running.
- Change the time
- WHen the alarm sounds
- Stop the timer before the alarm sounds
- Set the countdown timer
- • Use the stopwatch
- Measure time
- Measure split time
- Measure lap time
- Choose other stopwatch options
- • Use the calculator
- Connectivity (Menu 12)
- Services (Menu 13)
- • Notes on wireless Internet access
- • Set up for browsing
- • Sign on to the wireless Internet
- • Use browser options
- • Navigate the wireless Internet
- • Use bookmarks
- • GPRS icons
- 11 Accessories
- 12 Referenceinformation
- • Battery statements
- • Use proper CARE AND MAINTENANCE
- • Understand IMPORTANT SAFETY INFORMATION
- • Emergency calls
- 1 If the phone is not on, switch it on. Check for adequate signal strength.
- 2 Press [handset down] as many times as needed (for example, to exit a call, to exit a menu, etc....
- 3 Key in the emergency number for your present location (for example, 911 or other official emerg...
- 4 Press the e key.
- Certification Information (SAR)
- 13 Troubleshooting
- 14 Frequently Asked Questions
- 15 Glossary
- 16 Technical information
- 17 Nokia One-Year Limited Warranty
- 1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purc...
- 2 The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is ...
- 3 The limited warranty extends only to Consumers who purchase the Product in the United States of...
- 4 During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any ...
- 5 Upon request from Nokia, the Consumer must prove the date of the original purchase of the Produ...
- 6 The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia ...
- 7 The Consumer shall have no coverage or benefits under this limited warranty if any of the follo...
- a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposur...
- b) The Product has been damaged from external causes such as collision with an object, or from fi...
- c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the P...
- d) The Product serial number plate or the accessory data code has been removed, defaced or altered.
- e) The defect or damage was caused by the defective function of the cellular system or by inadequ...
- 8 Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem devel...
- a) The Consumer shall return the Product to the place of purchase for repair or replacement proce...
- b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the...
- c) The Consumer shall include a return address, daytime phone number and/or fax number, complete ...
- d) The Consumer will be billed for any parts or labor charges not covered by this limited warrant...
- e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the P...
- f) If the Product is returned during the limited warranty period, but the problem with the Produc...
- 9 YOU (THE CONSUMER) UNDERSTAND THAT THE PRODUCT MAY CONSIST OF REFURBISHED EQUIPMENT THAT CONTAI...
- 10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE ...
- 11 Some states do not allow limitation of how long an implied warranty lasts, so the one year war...
- 12 Nokia neither assumes nor authorizes any authorized service center or any other person or enti...
- 13 This is the entire warranty between the Nokia and the Consumer, and supersedes all prior and c...
- 14 This limited warranty allocates the risk of failure of the Product between the Consumer and No...
- 15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months fol...
- 16 Questions concerning this limited warranty may be directed to: Nokia Inc. Attn.: Customer Serv...
- 17 The limited warranty period for Nokia supplied attachments and accessories is specifically def...
- Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all user...
- A Guide to Safe and Responsible Wireless Phone Use
- 1 Get to know your wireless phone and its features such as speed dial and redial. Carefully read ...
- 2 When available, use a hands free device. A number of hands free wireless phone accessories are ...
- 3 Position your wireless phone within easy reach. Make sure you place your wireless phone within ...
- 4 Suspend conversations during hazardous driving conditions or situations. Let the person you are...
- 5 Do not take notes or look up phone numbers while driving. If you are reading an address book or...
- 6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or befor...
- 7 Do not engage in stressful or emotional conversations that may be distracting. Stressful or emo...
- 8 Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you ...
- 9 Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfe...
- 10 Call roadside assistance or a special wireless non-emergency assistance number when necessary....
- A Guide to Safe and Responsible Wireless Phone Use
- Appendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones.
- Phone notes
[FCC Draft 49 FCC Draft ]
Manage phone security
2 After a brief pause, you’re prompted to enter the current PIN code.
Enter the PIN code and press OK.
3 You’re prompted to enter the new PIN code. Enter the new PIN code
and press OK.
4 You’re prompted to re-enter the new PIN code for verification.
Enter the new PIN code again and press OK.
A message appears in the display confirming your PIN code has
been changed.
The PIN2 Code
The PIN2 code is required for features such as Fixed dialing. If you enter
an incorrect PIN2 code three times in succession, the PIN2 code is blocked
and you’ll have to enter the PUK2 code.
Note: The original PIN2 code must be obtained from your
wireless provider.
CHANGE YOUR PIN2 CODE
1 Press Menu 4-8-6-3 (Settings - Security settings - Access codes -
Change PIN2 code). You’re prompted to enter the current PIN2 code.
2 Enter the current PIN2 code and press OK. You’re prompted to enter
the new PIN2 code.
3 Enter the new PIN2 code and press OK. You’re asked to verify the new
PIN2 code by entering it again.
4 Enter the new PIN2 code again and press OK. A message appears in
the display confirming you’ve changed the PIN2 code.
Personal unblocking key (PUK) codes
PUK and PUK2 codes are used to restore blocked PIN and PIN2 codes.
Both PUK and PUK2 codes are eight characters in length and cannot
be changed. PUK and PUK2 codes must be obtained from your
wireless provider.