User's Guide

Nokia 8390 draft v1.1[ 75 ]

Note: Do NOT press Quit unless you want to cancel the recording.

The phone replays then saves the recorded tag.The [insert smiley face]

icon appears next to commands which have voice tags assigned.

Activate a voice command

After you have associated a voice tag with a phone function, you can issue

a command by speaking the voice tag. There are three ways to activate a

voice command:

1 If you have the optional headset attached, press and hold the headset

button. OR

•Press and hold Names. OR

• Press and hold the volume down key.

2 When Please speak now appears, pronounce the voice tag clearly

into the microphone. When the phone finds the tag, Found appears,

and the command is issued.

Note: You cannot use voice commands if you are actively sending or

receiving data using the GPRS connection.

Work with an existing voice command tag

After you have associated a voice tag to a command, you can choose on

of the following options:

• Listen to the tag

• Change the tag

•Erase the tag

For detailed instructions, refer to these sections on pages 72-73.