User Manual

8290 User Guide v2 2/18/00 [ 53 ]
Advanced calling features
4 The phone displays Press Start, then speak after tone.
5 Press Start.
Note: Refer to “Notes about voice tags” on page 51.
6 The phone repeats your voice tag, and Voice tag saved appears.
Note: If you’re using the headset and the phone does not locate the
number, you will hear an error tone and No match found
appears. To start voice dialing again, press and hold the
headset button immediately after the error tone.
Erase a voice tag
1 Press Names and scroll to Voice tags.
2 Press Select, then scroll to the name with the voice tag you want to
change.
3 Press Options, scroll to Erase, and press OK.
Erase voice tag? appears.
4 Press OK to erase the voice tag.
• 1-touch dialing
Assign a name and number to a 1-touch dial location so that when you
press this key, the associated number automatically dials.
Note: The first nine numbers stored in SIM memory are automatically
stored in keys 1 through 9 as 1-touch dial numbers. You can
assign new numbers to the keys, but the names and numbers
must be already stored in the phone book. Refer to “Phone book”
on page 28 for more information.
Key 1 can be set up to access your voice mail. Check with your
service provider for details. Also, any key can be set up to dial
emergency numbers such as 911.
8290ug v2.fm Page 53 Friday, February 18, 2000 5:42 PM