User Manual

8890 User Guide v8 11/30/99 [ 65 ]
Customizing your phone
3 Scroll to
&USTOMIZE and press 2. . Scroll to :ARNINGTONES ,
then press
6FMFDU .
4 Scroll to
2N or 2FF , then press 2. .
Rename a profile
1 Press 0ENU 3.
2 Scroll to the profile you want to rename. (Remember, you cannot
rename the Normal, Car, or Headset profiles) and press
2QUJPOT .
3 Scroll to
5ENAME and press 2. .
4 Enter the new profile name, then press
2. .
Accessory profiles
Headset and Car profiles
When you connect your phone to an approved headset or car kit, the
phone automatically selects the
+EADSET or &AR profile. These
prpofiles do not appear in the phone’s menu until you connect the
accessory. Also, you cannot choose a different profile while these
accessories are connected.
Note: When you connect the phone to a Headset or a Car Kit, the sliding
cover is deactivated. Use , , , or to answer,
end, or reject calls.
Your phone remembers any changes you make to the sound settings while
the headset or car kit is connected, and uses them again the next time you
use that accessory.
Automatic answer
This profile lets your phone answer incoming calls after just one ring.
Note: This profile is available only when your phone is connected to a
headset or to an approved car kit.
This feature does not function with data calls.
8890ug.book Page 65 Tuesday, November 30, 1999 3:39 PM