User Manual

[ 48 ] 8890 User Guide v8 11/30/99
.
Note: The order of the following steps may vary, depending on which
dialing sequence your card uses.
1 Enter the access number (usually the 1-800 number listed on the
back of the calling card), then press
2. .
2 Enter the card number and/or PIN, then press
2. .
3 Your phone displays
6AVECHANGES" Press 2. .
4 Scroll to
&ARDNAME and press 6FMFDU .
5 Enter the card name, then press
2. .
Choosing a calling card
1 Press 0FOV 4 4 2.
2 Scroll to the card you want to use, then press
2QUJPOT .
3
6ELECT is highlighted; press 2. .
4 Enter your security code, then press
2. .
Dialing sequence
Use for cards
that require you to:
Cards using
this sequence
Access no.
+ Phone no.
+ card no.
Dial 1-800 access number, then
phone number, then card
number (+ PIN if required)
MCI, AT&T True
Choice, Sprint
Canada, Unitel
Access no.
+ card no.
+ phone no.
Dial 1-800 access number, then
card number (+ PIN if required),
then phone number
networkMCI,
WorldPhone MCI
Prefix
+ phone no.
+ card no.
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (then PIN, if required)
GTE, PacBell, AT&T,
Stentor
8890ug.book Page 48 Tuesday, November 30, 1999 3:39 PM