User's Guide

&21),'(17,$/
6360 User Guide Draft [ 69 ] 14 May 2001
Use advanced calling features
8
Store touch tone sequences (strings)
You can store touch tone strings the same way that you store names and
numbers in your phone book. You can store an entire sequence of digits
and send it as touch tones for frequently used strings of numbers.
STORE TOUCH TONE STRINGS WITH PHONE NUMBERS
1 Enter the phone number that you want associated with a touch tone.
2 Press w or p where needed.
w (wait): When you dial this phone number, your phone first dials the
number, and then waits (because of the w character) for you to press
Send. When you press Send, the phone sends your touch tone.
p (pause): If you include a p character instead of a w, your phone
pauses for 2.5 seconds and then automatically sends the touch tone.
3 Enter the touch tone string.
4 Store the number as you normally would.
SEND A TOUCH TONE STRING
1 Press Menu 4-4-2-1 (Settings > Phone settings > Touch tones >
Manual touch tones).
2 Make sure that the setting is not set to Off.
If it is, use or to scroll to one of the other options and press
Select.
3 Then, during your call, press Options, scroll to Touch tones and press
Select.
4 Enter the touch tone string or recall the string from the phone book,
and press Select.
Warning: If you send touch tones while in the analog mode, be
careful not to send confidential information.