User Manual

12
[ 68 ]
Set automatic answer
This profile lets your phone answer incoming calls after just one ring.
Note: This profile is available only when your phone is connected
to a headset, loopset or to an approved car kit. This feature applies
only to voice calls.
1 Press Menu 4 6 (Settings > Accessory settings).
2 Scroll to Headset, Handsfree, or Loopset, then press Select.
3 Scroll to Automatic answer, then press Select.
4 Scroll to On and press Select.
Set the default profile
When you use the headset, car kit or loopset, you have the option of
choosing a profile. You can use the currently selected profile (for example,
Normal) or you can chose from the list.
1 Press Menu 4 6 (Settings > Accessory settings).
2 Scroll to Headset, Handsfree or Loopset, then press Select.
3 Scroll to Default profile, then press Select.
4 Scroll to the profile you want, then press Select.
Set up the car profile
If you are using your phone with a Nokia-approved car kit, you can set
lights to On (lights stay on) or Automatic (after 15 seconds, lights turn
off until the next key is pressed or the phone rings).
Set up the loopset profile
The LPS-3 Loopset gives people with T-coil equipped hearing aids the
ability to make and receive calls without noise interference.
Important: Refer to the booklet that comes with the LPS-3 for
complete instructions and safety information.
3590 FCC draft.book Page 68 Thursday, February 14, 2002 2:36 PM