User Manual

11
[ 64 ]
1 Hold the phone up to your ear, then press and
hold Names.
You can also press the volume key down.
When you hear several beeps and Please
speak now appears, release the button.
2 Pronounce the voice tag clearly into the
microphone. Searching appears. When the
phone finds the voice tag, Found appears, and the phone
automatically dials the number.
If the phone does not locate a number, Nomatchfound.Tryagain?
appears.
3 Press Yes to try again or Exit to cancel and return to the Start screen.
If you’re using the headset and the phone does not locate the number,
you will hear an error tone and No match found appears. To start voice
dialing again, press and hold the headset button immediately after
the error tone.
Listen to a voice tag
Change a voice tag
Erase a voice tag
3590 FCC draft.book Page 64 Thursday, February 14, 2002 2:36 PM