User Manual

[ 37 DRAFT ]
Basic operations
REMOVE THE BATTERY
3 After you’ve removed the lower
shell, grasp the removal flap and
gently pull; the battery lifts from its
compartment
REMOVE THE UPPER SHELL
4 Press the metal release bumps on
the sides of the phone while gently
sliding the upper shell away from
the rest of the phone.
INSTALL THE KEY MAT AND
NEW SHELLS
5 Remove the key mat from
the old lower shell and
place it into the new lower
shell as shown.
6 Slide the upper shell over
the top of the phone until it
clicks into place.
7 Repace the battery. Position
the battery so the gold contacts
match up with those on the
phone. The battery label should
be facing away from the phone.
8 Insert the battery, contact end
first into the battery slot.
9 Snap the other end of the battery into place and snap the back of the