User's Manual

Menu functions
73
An access point name is needed to establish a connection to a
GPRS network. You obtain the access point name from your
network operator or service provider.
• IP address - Key in the address, press for a dot , and press OK.
You obtain the IP address from your network operator or service
provider.
• Authentication type - Select Secure or Normal. If you select
Automatic , the login type uses the user name and password keyed
in the following settings. If you select Manual, the login
information is required when establishing a connection.
• Login type - Select Manual or Automatic.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
Making a connection to a WAP service
Firstly, make sure that the service settings of the WAP service you
want to use are activated. To activate the settings:
• Press Menu, and select Services and Settings. Select Active service
settings and scroll to the set you want to activate and press
Activate.
Secondly, make a connection to the WAP service. There are three
ways to connect:
1. Open the homepage of the WAP service:
Press Menu, and select Services and Home.
Tip: To quickly open the homepage of a WAP service,
press and hold in standby mode.
2. Select a bookmark of the WAP service:
Press Menu, and select Services, Bookmarks, and select a
bookmark.
If the bookmark does not work with the current active service
settings, activate another set of service settings and try again.
3. Key in the address of the WAP service: