User's Manual

Menu functions
72
• Homepage - Key in the homepage address of the WAP service
that you want to use, press for a dot, and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
When the connection security is On, the phone tries to use a
secure connection with the WAP service. If a secure connection
is not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, you must set
the connection security to Off.
• Data bearer - Select GSM data or GPRS. Settings for the
selected bearer, see Settings when GSM data is the selected
data bearer and Settings when GPRS is the selected data bearer
below.
For pricing, connection speed and other information, contact
your network operator or service provider.
Settings when GSM data is the selected data bearer
• Dial-up number - Key in the phone number and press OK.
• IP address - Key in the address, press for a dot, and press OK.
You obtain the IP address from your network operator or service
provider.
• Authentication type - Select Secure or Normal .
• Data call type - Select Analogue or ISDN.
• Data call speed - Select the speed you want to use, or select
Automatic. Automatic is available only if the current selected data
call type is Analogue. The actual data call speed depends on the
service provider.
• Login type - Select Manual or Automatic.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
Settings when GPRS is the selected data bearer
• GPRS access point - Key in the access point name and press OK.