User's Manual

Menu functions

• The user of the sending phone selects the desired IR function to

start data transfer.

If data transfer is not started within two minutes after the activation

of the IR port, the connection is cancelled and has to be started

again.

IR connection indicator

• When is shown continuously, the IR connection is activated

and your phone is ready to send or receive data via its IR port.

• When blinks, your phone is trying to connect to the other

device or a connection has been lost.

GPRS

GPRS connection

You can set the phone to automatically register to a GPRS network

when you switch the phone on. Press Menu, and select Connectivity,

GPRS, GPRS connection and Always online. Starting a WAP or PC dial-

up application, or sending/receiving multimedia messages creates the

connection between phone and network and data transfer is possible.

When you end the application, GPRS connection is ended but the

registration to the GPRS network remains.

If you select When needed, the GPRS connection is established when

an application needs it and closed when you end the application.

GPRS modem settings

You can connect the phone via infrared or data cable connection to a

compatible PC and use the phone as a modem to enable GPRS

connectivity from the PC.

Press Menu, and select Connectivity, GPRS and GPRS modem settings.

Select Active access point and activate the access point you want to

use. Select Edit active access point to change the access point settings.

• Scroll to Alias for access point and press Select. Key in the name

you would like for the activated access point and press OK.

• Scroll to GPRS access point and press Select. Key in the Access

Point Name (APN) and press OK.