User's Manual

Menu functions

• Manual tuning. Briefly press either of the scroll keys to move the

channel search 0.1 MHz upwards or downwards or press and hold

down the keys to quickly search upwards or downwards for a

channel. To save the channel, press OK and see Save channel

above.

Tip: To quickly select Manual tuning , press when in the

Radio menu.

• Set frequency. If you know the frequency of the radio channel you

would like to listen to (between 87.5 MHz and 108.0 MHz), key it

in and press OK. To save the channel, see Save channel above.

Tip: To quickly select Set frequency, press when in the

Radio menu.

• Delete channel. Scroll to the saved channel, press Delete, and OK.

• Rename. Key in a new name for the saved channel and press OK.

• Loudspeaker (or Headset) to listen to the radio using the

loudspeaker (or headset). Keep the headset connected to the

phone. The lead of the headset functions as the antenna of the

radio.

Note: Using the loudspeaker consumes the battery and the

phone’s operating time will be reduced considerably.

• Mono output (or Stereo output) to listen to the radio in mono (or

in stereo).

You can normally make a call or answer an incoming call while

listening to the radio. The volume of the radio is muted. When you

end the call, the radio will automatically be turned on.

When an application using a GPRS or HSCSD connection is sending or

receiving data, it may interfere with the radio.

■ Gallery (Menu 7)

WARNING: Do not switch the phone on when wireless phone

use is prohibited or when it may cause interference or danger.

You can save images and ringing tones, for example, that have been

received in multimedia messages in the folders of the gallery, see

Reading and replying to a multimedia message on page 38.