User's Manual

Menu functions
52
44. Note that the settings you make, change the settings in the active
profile.
• Select Incoming call alert to select how the phone notifies you of
an incoming voice call. The options are Ringing, Ascending, Ring
once, Beep once and Off.
• Select Ringing tone for incoming voice calls. To select ringing
tones that have been saved in the Gallery , select Open gallery from
the ringing tone list.
• Select Ringing volume and Vibrating alert for incoming voice calls
and messages. The vibrating alert does not work when the phone
is connected to a charger, a desktop stand, or a car kit.
Tip: If you receive a ringing tone via OTA or by downloading,
you can save the ringing tone in the Gallery.
• Select Light alert to set the phone to flash the integrated
flashlight during an arriving call.
Note: If you have switched the flashlight on before the incoming call,
the flashlight will not flash.
• Select Message alert tone to set the alert tone for the incoming
messages, Keypad tones, or Warning tones to set the phone to
sound tones for example, when the battery is running out of
power.
• Select Alert for to set the phone to ring only upon calls from phone
numbers that belong to a selected caller group. Scroll to the caller
group you want or All calls and press Mark.
Accessory settings
Accessory settings menu is shown only if the phone is or has been
connected to one of the compatible headsets or loopsets.
Press Menu, and select Settings and Accessory settings. You can select
Headset or Loopset if the corresponding accessory is or has been
connected to the phone.
• Select Default profile to select the profile you want to be
automatically activated when you connect the selected accessory.
You can select another profile while the accessory is connected.