User's Guide

62
• A cable for connecting the TTY to your phone. Usually supplied by the
manufacturer of the TTY device
• The Nokia TTY adapter HDA-8, which can be purchased as
an accessory
Important: The Nokia TTY adapter HDA-8 is for use with
compatible TTY devices and headsets only. Please check your TTY
device or headset to ensure that the connection is compatible.
Nokia Original headsets attach directly to the phone and do not
require this adapter. Nokia does not endorse, warrant, or authorize
use of any accessories not manufactured or licensed by Nokia.
Connect TTY hardware
1 The TTY device comes
with a cable. Plug the
larger end of the cable
into the input jack on
the TTY.
2 Plug the other end of
the cable into the TTY
adapter HDA-8.
3 Plug the HDA-8 into
the connector on the bottom of your phone
Make a call with TTY
Note: You must have a loopset or other accessory attached to your
phone prior to selecting the following menu.
1 At the Start screen, press Menu 4-6-4-1-1 (Settings - Accessory
settings - TTY/TDD - Use TTY - Yes).
Note: After selecting Yes, this becomes the default and you won’t
have to do it again unless you turn TTY/TDD off.
2 Press to return to the Start screen.
3 Enter the number you wish to call on the phone and press .