User's Guide

Table Of Contents

INSERT DIALING CODES

Press to cycle through available dialing codes, Once the desired

code appears, pause briefly to insert the code into the dialing string.

Available dialing codes are as follows:

Setup voicemail with dialing codes

1 At the Start screen, press Names, scroll to 1-touch dialing, and

press Select.

2 Scroll to an empty 1-touch dialing slot and press Assign.

3 Enter your voice mailbox number, including the area code.

4 Refer to the dialing codes table and enter any codes as necessary

using the information that you wrote down earlier.

For example, if you have to pause for 5 seconds after connecting to

voicemail, enter p twice (after the voice mailbox number).

Example: 2145551212pp

5 Enter any remaining pauses, PIN codes, and other information that

allows you to listen to your messages, and press OK.

6 Enter a name (such as Voicemail) and press OK. A message appears in

the display confirming your 1-touch dialing location has been saved.

Now, to dial and listen your voicemail, just press and hold the

assigned 1-touch dialing key at the Start screen. No other keypresses

should be necessary.

Bypasses a set of instructions

Precedes an international telephone number

Pauses for 2.5 seconds before sending any numbers that follow

Wait. Your phone waits for you to press before it sends the

any (numbers) that follow