User's Guide

41
Use voicemail
Listen to your voice messages
Once you’ve setup voicemail, you can dial the number one of three ways:
• Dial the number using the keypad
• Press and hold
•Press Listen if there’s a notification message in the display
Once you connect and the pre-recorded greeting begins, press ,
enter your user ID, and follow the recorded instructions.
• AUTOMATE VOICEMAIL WITH DIALING CODES
About dialing codes
You can insert special characters called “dialing codes” into phone
numbers such as voicemail and then save the number to a 1-touch dialing
location. Dialing codes instruct the receiving system to pause, wait,
bypass, or accept the numbers that follow them in the dialing string.
Note: Each voicemail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voicemail service.
Write down some information
1 Write down your voice mailbox number
2 Call and check your voicemail as you normally would.
3 Write down your interaction with the recorded prompts. Keep in
mind that each voicemail service may vary. However, It should look
something like this:
Dial 2145551212, pause 5 seconds, press , pause 2 seconds, enter
1234, press .
Important: Be precise, you’ll need this information in “Setup
voicemail with dialing codes” on page 42.