User's Manual

Menu functions
78
Basic steps for accessing and using WAP services
1. Save the service settings that are needed to access the WAP service
that you want to use. See page 83.
2. Make a connection to the given WAP service. See page 80.
3. Start browsing the pages of the WAP service. See page 81.
4. Once you are finished browsing, end the connection to the WAP
service. See page 83.
Setting up the phone for a WAP service
You may receive the service settings as a text message from the network
operator or service provider that offers the WAP service that you want
to use. For more information, contact your network operator or service
provider, or visit Club Nokia’s website (www.club.nokia.com).
You can also key in the settings manually or add and edit the settings
with PC Suite. For appropriate settings, contact your network operator
or service provider. The WAP settings may be available, for example, on
their website.
Saving the service settings received as a text message
When you receive the service settings as a text message, Service settings
received is displayed.
• To save the received settings, press Options and select Save.
If no settings are saved in Active service settings, the settings are
saved under the first free connection set and also activated.
If there are settings saved in Active service settings, Activate saved
service settings? will be displayed. To activate the saved settings,
press Yes, or to save them only, press No.
• To discard the received settings, press Options and select Discard.
• To view the received settings first, press Options and select View. To
save the settings, press Save.
npl-2_en1_1.fm Page 78 Monday, September 2, 2002 2:39 PM