User's Manual

Menu functions

•Select Automatic answer to set the phone to answer an incoming

call automatically after five seconds. If the Incoming call alert is set

to Beep once or Off, automatic answer will not be in use.

•Select Lights to set the lights permanently On. Select Automatic to

set the lights on for 15 seconds after a keypress. The Lights option is

available only when Handsfree is selected.

Security settings

Note:

When security features that restrict calls are in use (call barring,

closed user group and fixed dialling), calls may be possible to certain

emergency numbers in some networks (e.g. 112, 911 or other official

emergency numbers).

Press

, and select

Settings and Security settings. Select

• PIN code request to set the phone to ask for your PIN code every time

the phone is switched on. Some SIM cards do not allow the PIN code

request to be turned off.

• Call barring service (network service) to restrict incoming calls to and

outgoing calls from your phone. A barring password is required.

• Fixed dialling to restrict your outgoing calls to selected phone

numbers if this function is supported by your SIM card. The PIN2

code is required.

• Closed user group. Closed user group is a network service that

specifies the group of people whom you can call and who can call

you. For more information contact your network operator or service

provider.

• Security level. Select Phone and the phone will ask for the security

code whenever a new SIM card is inserted into the phone.

Select Memory and the phone will ask for the security code when

SIM card’s memory is selected and you want to change the memory

in use, (see Selecting the phone book settings on page 28) or copy

from one memory to another (Copying phone books on page 30).

• Access codes to change the security code, PIN code, PIN2 code or

barring password. Codes can only include numbers from 0 to 9.

npl-2_en1_1.fm Page 61 Monday, September 2, 2002 2:39 PM