User's Manual

Menu functions

Tone settings

Press Menu, and select Settings and then Tone settings. You can find the

same settings in the Profiles menu, see Profiles (Menu 3) on page 53.

Note that the settings you make, change the settings in the active

profile.

Select Incoming call alert to select how the phone notifies you of an

incoming voice call. The options are Ringing, Ascending, Ring once, Beep

once and Off.

Select Ringing tone for incoming voice calls. To select ringing tones

saved in the Gallery, select Open gallery from the ringing tone list.

Select Ringing volume and Vibrating alert for incoming voice calls and

incoming messages. The vibrating alert does not work when the phone is

connected to a charger, desktop stand, or a car kit.

Tip: If you receive a ringing tone via OTA or by downloading, you

can save the ringing tone in the Gallery.

Select Message alert tone to set the alert tone for the incoming

messages, Keypad tones, or Warning tones to set the phone to sound

tones for example, when the battery is running out of power.

Select Alert for to set the phone to ring only upon calls from phone

numbers that belong to a selected caller group. Scroll to the caller group

you want or All calls and press Mark.

Accessory settings

Accessory settings menu is shown only if the phone is or has been

connected to one of the following accessories: headset HDB-4,

handsfree unit CARK126, or mobile inductive loopset LPS-4.

Press Menu, and select Settings and Accessory settings. You can select

Headset, Handsfree or Loopset if the corresponding accessory is or has

been connected to the phone.

•Select Default profile to select the profile you want to be

automatically activated when you connect the selected accessory.

You can select another profile while the accessory is connected.

npl-2_en1_1.fm Page 60 Monday, September 2, 2002 2:38 PM