User's Manual

Menu functions

Colour schemes

You can change the colour in some display components, for example,

indicators and signal bars.

Press

, and selectSettings, Display settings and Colour schemes.

Select the desired colour scheme.

Operator logo

To set your phone to display or hide the operator logo, press

, and

selectSettings, Display settings and Operator logo.

Note that the operator logo is not displayed when the phone activates

the screen saver.

For more information and availability of an operator logo via SMS, MMS

or WAP, contact your network operator and/or WAP service provider,

and see also PC Suite on page 89.

Screen saver

The screen saver showing a digital clock is used for power saving in

standby mode. It will be activated when no function of the phone is

used for a certain time. Press any key to deactivate the screen saver.

Screen saver is also deactivated when the phone is out of the network

coverage area.

Press

, and selectSettings, Display settings and Screen saver

timeout. Select the timeout from 5 seconds to 5 minutes when the

digital clock display will be activated.

Note that the screen saver overrides all the graphics and texts on the

display in standby mode.

Display brightness

You can change the display contrast level used on the phone display.

Press

, and selectSettings, Display settings and Display brightness.

Scroll with and to decrease and increase the contrast level, and

press OK to accept it.

npl-2_en1_1.fm Page 59 Monday, September 2, 2002 2:38 PM