User's Manual

Menu functions

Summary after call

Press

, and select Settings, Call settings and Summary after call.

Select On and the phone will briefly display the duration and cost

(network service) of the last call.

Send my caller identity

Press

, and select Settings, Call settings and Send my caller

identity. Select Yes and your phone number will be displayed to the

person you are calling (network service). Select Set by network and the

setting agreed upon with your service provider is used.

Line for outgoing calls

Line for outgoing calls is a network service to select the phone line 1 or

2, that is subscriber number, for making calls.

Press

, and select Settings, Call settings and Line for outgoing calls.

If you select Line 2 and have not subscribed to this network service, you

will not be able to make calls. However, calls on both lines can be

answered regardless of the selected line.

If supported by your SIM card, you can prevent the line selection by

selecting the option Lock.

For more information on availability, contact your network operator or

service provider.

Tip: In standby mode you can switch from one line to the other

by pressing and holding .

Phone settings

Language

Press Menu, and select Settings, Phone settings and Language. Select

the language for the display texts. If Automatic is selected, the phone

selects the language according to the information on the SIM card.

Automatic keyguard

Note:

When the keypad is locked, calls may be possible to the

emergency number programmed into your phone (e.g. 112, 911 or other

official emergency number). Key in the emergency number and press

. The number is displayed only after you have keyed in its last

digit.

npl-2_en1_1.fm Page 56 Monday, September 2, 2002 2:38 PM