User's Manual

Menu functions

your service provider. Divert options not supported by your SIM card or

your network operator may not be shown.

Select the divert option you want, for example, select Divert if busy to

divert the voice calls when your number is busy or when you reject an

incoming call.

To set the divert setting to on, select Activate, to set the divert setting to

off, select Cancel, or Check status to check whether the divert is

activated or not. To change the timeout when the call is diverted, first

select Set delay if this is available for the divert option, and then select

Activate to set the divert setting to on. Several divert options may be

active at the same time.

To see the divert indicators in standby mode, see Standby mode on

page 13.

Anykey answer

Press

, and select Settings, Call settings and then Anykey answer.

Select On and you can answer an incoming call by briefly pressing any

key, except , selection keys and , and .

Automatic redial

Press

, and select Settings, Call settings and Automatic redial.

Select On and your phone will make a maximum of ten attempts to

connect the call after an unsuccessful call attempt.

Speed dialling

Press

, and select Settings, Call settings and Speed dialling. Select

On and the names and phone numbers assigned to the speed dialling

keys, from to , can be dialled by pressing and holding the

corresponding number key.

Call waiting

Press

, and select Settings, Call settings and Call waiting. Select

Activate and the network will notify you of an incoming call while you

have a call in progress (network service). See Call waiting on page 23.

npl-2_en1_1.fm Page 55 Monday, September 2, 2002 2:38 PM