User Guide

18 Microsoft Broadband Networking Wireless Base Station User’s Guide
Step 5: Establish Your Wireless Settings
The wireless settings of all the devices on your network must match the wireless
settings you provide for the base station. Be sure to note the settings you enter on this
page so you can establish the same settings when you configure wireless adapters or
other network devices.
1. From the Base Station Management Tool menu, click Wireless.
2. Select the Enable wireless access check box.
3. Type the wireless network name in the Wireless network name (SSID) box. The
wireless network name, also known as the Service Set Identifier (SSID), identifies
your network. The network name is case sensitive and cannot exceed 32
characters.
4. To apply these wireless settings, click Apply.
Step 6: Establish Your Wireless Security Settings
The base station uses Wired Equivalent Privacy (WEP) to help prevent unauthorized
users from joining your network or accessing data that is being transmitted over the
network.
1. From the Base Station Management Tool Security menu, click Wireless Security.
2. Under Wired Equivalent Privacy (WEP), select the Enable wireless security
check box.
3. In the Encryption strength drop-down list box, click 128-bit or leave the default
setting of 64-bit.
4. If you selected 128-bit encryption, the first Key box, type an encryption key. If you
selected 64-bit encryption, you can type up to four WEP keys in the Key boxes. For
128-bit encryption, the WEP key must be 26 characters in length. For 64-bit
encryption, the WEP key must be 10 characters in length. WEP keys can contain
numbers and the letters A through F.
5. If you selected 64-bit encryption, in the Key index drop-down list box, click a key
index. The key index number indicates which of the four WEP keys will be enabled
on the network.
6. To enable the wireless security settings you have entered, click Apply.
Note The wireless security settings of all the devices on your network must match the
wireless security settings you provide for the base station. Be sure to note the settings you
enter on this page so you can establish the same settings when you configure wireless
adapters or other network devices.