User's Manual

5
To reconnect the pointing device to the receiver
1 Make sure that the pointing device and receiver are positioned as specified
earlier in these instructions.
2 Press the button on the top of the wireless receiver. The receiver light blinks
to indicate that it is in “connect” mode.
3 Press the button on the bottom of the pointing device.
If reconnecting the pointing device to the receiver does not solve the problem,
refer to the User’s Guide installed with IntelliPoint software.
Before using this product, read about the potential for radio interference in the
topic titled “Radio and TV interference regulations” in the User's Guide installed
with IntelliPoint software.
Read the User’s Guide
The User’s Guide is your complete product manual and it is installed with
IntelliPoint software. It contains important product information in a searchable
format, including:
• Microsoft pointing device and IntelliPoint software feature descriptions and
instructions
• Troubleshooting topics and Product Support Services information
• End-User License Agreement (EULA), Limited Warranty, and regulatory infor-
mation
To open the User’s Guide
• Windows: Click the Start button, point to Programs (or All Programs), click
Microsoft Mouse, and then click the Help button.
• Macintosh: Click the Apple menu, point to Control Panels (or click System
Preferences), click Microsoft Mouse, and then click User’s Guide on the Help
menu.
6
X08-75976_Mnl_Ret_Wireless_Pointing_Devices.p65 3/6/2002, 9:49 AM5