User's Manual

USB Connection (Windows or Macintosh)

• With your computer turned on, plug the rectangular

USB connector into your computer’s USB port.

If you are running Windows 98, you may be prompted to

insert the Windows 98 CD-ROM when you plug the con-

nector into your computer’s USB port. The required USB

driver is located in the Win98 folder of the Windows 98

CD-ROM.

Test the Pointing Device

Try using the pointing device. If it does not work as expected, make sure the

following procedures were completed as specified earlier in these instructions:

• New batteries are inserted correctly

• The receiver is properly connected to the computer

• The receiver and pointing device are properly positioned

If the pointing device is still not working, try changing the channel. Changing the

wireless connection channel is useful if you are experiencing interference.

To change the wireless connection channel

• Press the button on the bottom of the wireless pointing device.

If changing the channel does not solve the problem, you may need to reconnect

the pointing device to the receiver. To avoid potential interference, the pointing

device transmits data using a unique code, which the receiver is preset to ac-

cept. In rare circumstances, the pointing device may need to be reconnected

with the receiver to work properly.

USB connector

X08-75976_Mnl_Ret_Wireless_Pointing_Devices.p65 3/6/2002, 9:49 AM4