User's Manual

Before using the speaker, you must charge the battery.

1. Connect a USB cable to your computer or a compatible charger to a wall outlet.

2. Connect the micro-USB end of the cable to the charger connector on your speaker. When the

battery is fully charged, the red battery indicator light turns green.

3. Disconnect the cable from the speaker, then from the computer or disconnect the charger from

the wall outlet.

Switch on your speaker

Switch on your speaker to check the battery.

Press and hold the multifunction key for 3 seconds. If the battery is full, the battery indicator light

flashes green once. If the light flashes red fast, charge the battery.

The speaker automatically connects to the last connected device. If you have never paired your

speaker with a device, or you have cleared the pairings, pairing mode is activated.

If the speaker is not connected within 30 minutes, it switches off.

Switch the speaker off

Press and hold the multifunction key for 2 seconds. The speaker closes all connections and switches

off.