User Guide Wireless Portable Speaker MD-12 MD-12 Issue 1.
User Guide Wireless Portable Speaker MD-12 Contents Safety 3 Get started 4 About your accessory 4 Keys and parts 4 Charge your speaker 4 Switch on your speaker 5 Basic use 6 Pair and connect 6 About Bluetooth connectivity 6 Pair and connect your speaker using Bluetooth 6 Pair and connect your speaker using NFC 6 Clear the pairings 7 Connect your speaker manually 7 Make and receive calls 8 Listen to music 8 Product and safety information Copyrights and other notices © 2014 No
Safety Read these simple guidelines. Not following them may be dangerous or illegal. SWITCH OFF IN RESTRICTED AREAS Switch the device off when mobile phone use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.
Get started Learn how to start using your speaker. About your accessory With the Wireless Portable Speaker MD-12, you can listen to music or handle a voice call from your phone or other compatible device. A single speaker fills the room with clear, high-quality audio, and you can enjoy a more powerful boom by placing your speaker on a sturdy surface. Pair up the devices, or use a standard audio cable (3.5 mm) to connect your device.
Before using the speaker, you must charge the battery. 1. Connect a USB cable to your computer or a compatible charger to a wall outlet. 2. Connect the micro-USB end of the cable to the charger connector on your speaker. When the battery is fully charged, the red battery indicator light turns green. 3. Disconnect the cable from the speaker, then from the computer or disconnect the charger from the wall outlet. Switch on your speaker Switch on your speaker to check the battery.
Basic use Learn the basics of using your speaker. Pair and connect Before you can use your speaker, you need to pair and connect it to your compatible device. You can connect your speaker to your phone using either NFC or Bluetooth. You can pair your speaker with up to 8 devices, but connect to only one at a time. You can connect to another device on the go easily with NFC. If the connected device leaves Bluetooth range, the speaker tries to reconnect for 30 minutes.
Tap the NFC areas of the speaker and the device together. The speaker connects to the device automatically. If the speaker is switched off, it switches on before connecting. Tip: To reconnect a previously paired device, tap the NFC areas of the device and the speaker together. The speaker closes the active connection before reconnecting. For details on NFC, see the user guide of your device. To close the connection, tap the NFC areas together again.
Make and receive calls Need to pick up a call on the go? You can use your speaker for handling voice calls. Make sure your speaker is on. 1. To make a call, use the phone. 2. To answer or end a call, press the multifunction key quickly. 3. To reject an incoming call, press the multifunction key twice. Listen to music With your speaker, you can fill the room with music from your phone or computer. Connect a phone or other compatible device to your speaker, and play your favourite music.
Product and safety information Take care of your device Handle your device, battery and accessories with care. The following suggestions help you keep your device operational. • • • • • • • • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, let the device dry. Do not use or store the device in dusty or dirty areas. Do not store the device in high temperatures.
Do not dismantle, cut, crush, bend, puncture, or otherwise damage the battery in any way. If a battery leaks, do not let liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, or seek medical help. Do not modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged. Note: Use the battery and charger for their intended purposes only.
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
