Nokia HAIP Tag LD-6T User Guide 1
Contents 1. Introduction ................................................................................................................................ 3 2. Get started.................................................................................................................................. 4 Features ...................................................................................................................................... 4 Start using the tag ...........................................
1. Introduction Nokia HAIP Tag LD-6T is part of the Nokia HAIP system. Other parts of the HAIP system are HAIP Locator LD-6L and HAIP Positioning Software. The HAIP system allows you to locate and track any objects equipped with HAIP tags in an indoor environment equipped with HAIP locators. Read the HAIP System User Guide carefully before starting to use the HAIP system. For the latest guides, additional information, and downloads related to your Nokia product, go to www.nokia.com/support.
2. Get started Features 2 1 1. Mounting hole 2. Reset button 3.
Start using the tag Activate the tag Before using the tag, you must activate it and configure it for your HAIP System. 1. Press the reset button to activate the tag 2. Within 30 seconds, send a configuration command to the tag. For details, see HAIP System User Guide. Attach the tag to a locatable object Tie the tag to a locatable object through the mounting holes by using a cable tie. WARNING: Never attach the HAIP Tag to hot surfaces.
Product information Waterproof casing Your tag is protected against water until 1 meter of depth for maximum of 30 minutes. Battery The tag has an in-built CR2032 battery. In normal operation the battery will last for several years. The battery charge level can be monitored using the HAIP system, refer to HAIP System User Guide for details. Once the battery is empty the tag has to be recycled properly. Do not attempt to open the tag casing to replace the battery.
Care and Maintenance Your tag is a product of superior design and craftmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Do not attempt to open the tag. • Do not sink the tag in deep water (> 1m). Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the tag. Only use water and soap or a dry cloth to clean the surface of the tag. Do not paint the tag.
Copyright and other notices DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this LD-6T product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/global/declaration/declaration-of-conformity. © 2012 Nokia. All rights reserved. FCC/INDUSTRY CANADA NOTICE This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s).
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.