Nokia HAIP Locator LD-6L Installation Guide and Safety Information 1
Contents For your safety ............................................................................................................................... 3 1. Introduction ................................................................................................................................ 4 About this document .................................................................................................................. 4 2. Get started...........................................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete installation guide for further information.
1. Introduction Nokia HAIP Locator LD-6L is part of the Nokia HAIP system. Other parts of the HAIP system are HAIP Tag LD-6T and HAIP Positioning Software. The HAIP system allows you to locate and track any objects equipped with HAIP tags in an indoor environment equipped with HAIP locators. Read this guide carefully before having the locator professionally installed. Also, read the HAIP System User Guide carefully before starting to use the HAIP system.
2. Get started Parts The locator contains the following parts: 1 1. Locator main unit 2. Locator mounting bracket 2 In addition, the sales package may include also other parts, such as screws for the mounting bracket.
Locator main unit 5 1 2 3 4 1. Bracket mounting pins 2. Reset button 3. 12V DC connector 4. Ethernet connector 5.
Mounting bracket 3 2 1 4 1. Holes for ceiling/wall mounting screws 2. Holes for mounting bracket mounting pins 3. Safety lock 4.
Connect to power supply Option 1: Use Power over Ethernet (PoE) The locator supports the use of standard PoE (Power over Ethernet) components, e.g. PoE switch or power injector, as its power source. Only use standard certified PoE devices. When using PoE, a separate DC power supply is not required. Option 2: Use separate 12V DC power supply If you are not using PoE components, connect the locator to an approved DC power supply using the DC connector. Only use compatible power supplies.
Reset factory settings To reset factory settings, press the reset button while connecting power supply and keep it pressed for approximately three seconds until the red indicator light stops flashing. After that the locator switches on normally with the default factory settings.
3. Installation 4. Safety information Observe the following safety guidelines when installing the locator. • Only a qualified service technician should install or service the locator using the approved original Nokia parts supplied in the sales package. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the locator.
• Your service technician or dealer may be able to provide you with information on alternatives for mounting the equipment suitably in different types of indoor environments. • Do not smoke when installing the equipment. Make sure there is no source of fire or flame nearby. • Make sure cables are placed so that they will not be subject to mechanical wear and tear. 5. Install the locator This section describes how to install the locator onto a ceiling or wall of an indoor environment.
WARNING: Never attach, mount, or connect the mounting bracket to hot surfaces. Always make sure that the surface can carry the weight of the locator before installation. Not following general safety regulation can cause damage to objects or injuries to people. Rely on qualified personnel for carrying out the installation of HAIP locators. Install the locator to the mounting bracket 1.
1 2 3 ‘click’ 4 13 Nokia LD-6L Installation Guide and Safety Information
Product information Technical data Operating frequency range: 2400…2483 MHz Maximum transmit power: +4 dBm EIRP Operating temperature range: 0°C…+60°C Storage temperature range: –10°C…+70°C Input rating when using DC power supply: 12 V / 500 mA DC Operating voltage when using PoE: 48 V Typical power consumption: 2 W Dimensions: D: 202 mm, h: 40 mm Weight: 500g 14 Nokia LD-6L Installation Guide and Safety Information
Care and Maintenance Your locator is a product of superior design and craftmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Keep the locator dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. Do not use or store the locator in dusty, dirty areas. Its moving parts and electronic components can be damaged. • Do not attempt to open the locator.
Copyright and other notices DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this LD-6L product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/global/declaration/declaration-of-conformity. © 2012 Nokia. All rights reserved. FCC/INDUSTRY CANADA NOTICE This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s).
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.
